kube sdnotify: run proxies for the lifespan of the service

As outlined in #16076, a subsequent BARRIER *may* follow the READY
message sent by a container.  To correctly imitate the behavior of
systemd's NOTIFY_SOCKET, the notify proxies span up by `kube play` must
hence process messages for the entirety of the workload.

We know that the workload is done and that all containers and pods have
exited when the service container exits.  Hence, all proxies are closed
at that time.

The above changes imply that Podman runs for the entirety of the
workload and will henceforth act as the MAINPID when running inside of
systemd.  Prior to this change, the service container acted as the
MAINPID which is now not possible anymore; Podman would be killed
immediately on exit of the service container and could not clean up.

The kube template now correctly transitions to in-active instead of
failed in systemd.

Fixes: #16076
Fixes: #16515
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>

pkg/domain/infra/abi/play.go

@@ -155,7 +155,25 @@ func (ic *ContainerEngine) PlayKube(ctx context.Context, body io.Reader, options
 	var configMaps []v1.ConfigMap
 
 	ranContainers := false
+	// FIXME: both, the service container and the proxies, should ideally
+	// be _state_ of an object. The Kube code below is quite Spaghetti-code
+	// which we should refactor at some point to make it easier to extend
+	// (via shared state instead of passing data around) and make it more
+	// maintainable long term.
 	var serviceContainer *libpod.Container
+	var notifyProxies []*notifyproxy.NotifyProxy
+	defer func() {
+		// Close the notify proxy on return.  At that point we know
+		// that a) all containers have send their READY message and
+		// that b) the service container has exited (and hence all
+		// containers).
+		for _, proxy := range notifyProxies {
+			if err := proxy.Close(); err != nil {
+				logrus.Errorf("Closing notify proxy %q: %v", proxy.SocketPath(), err)
+			}
+		}
+	}()
+
 	// create pod on each document if it is a pod or deployment
 	// any other kube kind will be skipped
 	for _, document := range documentList {
@@ -205,10 +223,11 @@ func (ic *ContainerEngine) PlayKube(ctx context.Context, body io.Reader, options
 				podYAML.Annotations[name] = val
 			}
 
-			r, err := ic.playKubePod(ctx, podTemplateSpec.ObjectMeta.Name, &podTemplateSpec, options, &ipIndex, podYAML.Annotations, configMaps, serviceContainer)
+			r, proxies, err := ic.playKubePod(ctx, podTemplateSpec.ObjectMeta.Name, &podTemplateSpec, options, &ipIndex, podYAML.Annotations, configMaps, serviceContainer)
 			if err != nil {
 				return nil, err
 			}
+			notifyProxies = append(notifyProxies, proxies...)
 
 			report.Pods = append(report.Pods, r.Pods...)
 			validKinds++
@@ -220,10 +239,11 @@ func (ic *ContainerEngine) PlayKube(ctx context.Context, body io.Reader, options
 				return nil, fmt.Errorf("unable to read YAML as Kube Deployment: %w", err)
 			}
 
-			r, err := ic.playKubeDeployment(ctx, &deploymentYAML, options, &ipIndex, configMaps, serviceContainer)
+			r, proxies, err := ic.playKubeDeployment(ctx, &deploymentYAML, options, &ipIndex, configMaps, serviceContainer)
 			if err != nil {
 				return nil, err
 			}
+			notifyProxies = append(notifyProxies, proxies...)
 
 			report.Pods = append(report.Pods, r.Pods...)
 			validKinds++
@@ -289,23 +309,20 @@ func (ic *ContainerEngine) PlayKube(ctx context.Context, body io.Reader, options
 	}
 
 	if options.ServiceContainer && ranContainers {
-		// We can consider the service to be up and running now.
+		message := fmt.Sprintf("MAINPID=%d\n%s", os.Getpid(), daemon.SdNotifyReady)
-		// Send the sd-notify messages pointing systemd to the
-		// service container.
-		data, err := serviceContainer.Inspect(false)
-		if err != nil {
-			return nil, err
-		}
-		message := fmt.Sprintf("MAINPID=%d\n%s", data.State.ConmonPid, daemon.SdNotifyReady)
 		if err := notifyproxy.SendMessage("", message); err != nil {
 			return nil, err
 		}
+
+		if _, err := serviceContainer.Wait(ctx); err != nil {
+			return nil, fmt.Errorf("waiting for service container: %w", err)
+		}
 	}
 
 	return report, nil
 }
 
-func (ic *ContainerEngine) playKubeDeployment(ctx context.Context, deploymentYAML *v1apps.Deployment, options entities.PlayKubeOptions, ipIndex *int, configMaps []v1.ConfigMap, serviceContainer *libpod.Container) (*entities.PlayKubeReport, error) {
+func (ic *ContainerEngine) playKubeDeployment(ctx context.Context, deploymentYAML *v1apps.Deployment, options entities.PlayKubeOptions, ipIndex *int, configMaps []v1.ConfigMap, serviceContainer *libpod.Container) (*entities.PlayKubeReport, []*notifyproxy.NotifyProxy, error) {
 	var (
 		deploymentName string
 		podSpec        v1.PodTemplateSpec
@@ -316,7 +333,7 @@ func (ic *ContainerEngine) playKubeDeployment(ctx context.Context, deploymentYAM
 
 	deploymentName = deploymentYAML.ObjectMeta.Name
 	if deploymentName == "" {
-		return nil, errors.New("deployment does not have a name")
+		return nil, nil, errors.New("deployment does not have a name")
 	}
 	numReplicas = 1
 	if deploymentYAML.Spec.Replicas != nil {
@@ -325,18 +342,20 @@ func (ic *ContainerEngine) playKubeDeployment(ctx context.Context, deploymentYAM
 	podSpec = deploymentYAML.Spec.Template
 
 	// create "replicas" number of pods
+	var notifyProxies []*notifyproxy.NotifyProxy
 	for i = 0; i < numReplicas; i++ {
 		podName := fmt.Sprintf("%s-pod-%d", deploymentName, i)
-		podReport, err := ic.playKubePod(ctx, podName, &podSpec, options, ipIndex, deploymentYAML.Annotations, configMaps, serviceContainer)
+		podReport, proxies, err := ic.playKubePod(ctx, podName, &podSpec, options, ipIndex, deploymentYAML.Annotations, configMaps, serviceContainer)
 		if err != nil {
-			return nil, fmt.Errorf("encountered while bringing up pod %s: %w", podName, err)
+			return nil, notifyProxies, fmt.Errorf("encountered while bringing up pod %s: %w", podName, err)
 		}
 		report.Pods = append(report.Pods, podReport.Pods...)
+		notifyProxies = append(notifyProxies, proxies...)
 	}
-	return &report, nil
+	return &report, notifyProxies, nil
 }
 
-func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podYAML *v1.PodTemplateSpec, options entities.PlayKubeOptions, ipIndex *int, annotations map[string]string, configMaps []v1.ConfigMap, serviceContainer *libpod.Container) (*entities.PlayKubeReport, error) {
+func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podYAML *v1.PodTemplateSpec, options entities.PlayKubeOptions, ipIndex *int, annotations map[string]string, configMaps []v1.ConfigMap, serviceContainer *libpod.Container) (*entities.PlayKubeReport, []*notifyproxy.NotifyProxy, error) {
 	var (
 		writer      io.Writer
 		playKubePod entities.PlayKubePod
@@ -345,18 +364,18 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 	mainSdNotifyMode, err := getSdNotifyMode(annotations, "")
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	// Create the secret manager before hand
 	secretsManager, err := ic.Libpod.SecretsManager()
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	// Assert the pod has a name
 	if podName == "" {
-		return nil, fmt.Errorf("pod does not have a name")
+		return nil, nil, fmt.Errorf("pod does not have a name")
 	}
 
 	podOpt := entities.PodCreateOptions{
@@ -366,7 +385,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	}
 	podOpt, err = kube.ToPodOpt(ctx, podName, podOpt, podYAML)
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	// add kube default network if no network is explicitly added
@@ -384,7 +403,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 		ns, networks, netOpts, err := specgen.ParseNetworkFlag(options.Networks, pastaNetworkNameExists)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		podOpt.Net.Network = ns
@@ -404,16 +423,16 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	// Validate the userns modes supported.
 	podOpt.Userns, err = specgen.ParseUserNamespace(options.Userns)
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	// FIXME This is very hard to support properly with a good ux
 	if len(options.StaticIPs) > *ipIndex {
 		if !podOpt.Net.Network.IsBridge() {
-			return nil, fmt.Errorf("static ip addresses can only be set when the network mode is bridge: %w", define.ErrInvalidArg)
+			return nil, nil, fmt.Errorf("static ip addresses can only be set when the network mode is bridge: %w", define.ErrInvalidArg)
 		}
 		if len(podOpt.Net.Networks) != 1 {
-			return nil, fmt.Errorf("cannot set static ip addresses for more than network, use netname:ip=<ip> syntax to specify ips for more than network: %w", define.ErrInvalidArg)
+			return nil, nil, fmt.Errorf("cannot set static ip addresses for more than network, use netname:ip=<ip> syntax to specify ips for more than network: %w", define.ErrInvalidArg)
 		}
 		for name, netOpts := range podOpt.Net.Networks {
 			netOpts.StaticIPs = append(netOpts.StaticIPs, options.StaticIPs[*ipIndex])
@@ -425,10 +444,10 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	}
 	if len(options.StaticMACs) > *ipIndex {
 		if !podOpt.Net.Network.IsBridge() {
-			return nil, fmt.Errorf("static mac address can only be set when the network mode is bridge: %w", define.ErrInvalidArg)
+			return nil, nil, fmt.Errorf("static mac address can only be set when the network mode is bridge: %w", define.ErrInvalidArg)
 		}
 		if len(podOpt.Net.Networks) != 1 {
-			return nil, fmt.Errorf("cannot set static mac address for more than network, use netname:mac=<mac> syntax to specify mac for more than network: %w", define.ErrInvalidArg)
+			return nil, nil, fmt.Errorf("cannot set static mac address for more than network, use netname:mac=<mac> syntax to specify mac for more than network: %w", define.ErrInvalidArg)
 		}
 		for name, netOpts := range podOpt.Net.Networks {
 			netOpts.StaticMAC = nettypes.HardwareAddr(options.StaticMACs[*ipIndex])
@@ -442,12 +461,12 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 	p := specgen.NewPodSpecGenerator()
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	p, err = entities.ToPodSpecGen(*p, &podOpt)
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 	podSpec := entities.PodSpec{PodSpecGen: *p}
 
@@ -458,17 +477,17 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	for _, p := range options.ConfigMaps {
 		f, err := os.Open(p)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 		defer f.Close()
 
 		cm, err := readConfigMapFromFile(f)
 		if err != nil {
-			return nil, fmt.Errorf("%q: %w", p, err)
+			return nil, nil, fmt.Errorf("%q: %w", p, err)
 		}
 
 		if _, present := configMapIndex[cm.Name]; present {
-			return nil, fmt.Errorf("ambiguous configuration: the same config map %s is present in YAML and in --configmaps %s file", cm.Name, p)
+			return nil, nil, fmt.Errorf("ambiguous configuration: the same config map %s is present in YAML and in --configmaps %s file", cm.Name, p)
 		}
 
 		configMaps = append(configMaps, cm)
@@ -476,7 +495,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 	volumes, err := kube.InitializeVolumes(podYAML.Spec.Volumes, configMaps, secretsManager)
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	// Go through the volumes and create a podman volume for all volumes that have been
@@ -490,27 +509,27 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 					// error out instead reuse the current volume.
 					vol, err = ic.Libpod.GetVolume(v.Source)
 					if err != nil {
-						return nil, fmt.Errorf("cannot re-use local volume for volume from configmap %q: %w", v.Source, err)
+						return nil, nil, fmt.Errorf("cannot re-use local volume for volume from configmap %q: %w", v.Source, err)
 					}
 				} else {
-					return nil, fmt.Errorf("cannot create a local volume for volume from configmap %q: %w", v.Source, err)
+					return nil, nil, fmt.Errorf("cannot create a local volume for volume from configmap %q: %w", v.Source, err)
 				}
 			}
 			mountPoint, err := vol.MountPoint()
 			if err != nil || mountPoint == "" {
-				return nil, fmt.Errorf("unable to get mountpoint of volume %q: %w", vol.Name(), err)
+				return nil, nil, fmt.Errorf("unable to get mountpoint of volume %q: %w", vol.Name(), err)
 			}
 			// Create files and add data to the volume mountpoint based on the Items in the volume
 			for k, v := range v.Items {
 				dataPath := filepath.Join(mountPoint, k)
 				f, err := os.Create(dataPath)
 				if err != nil {
-					return nil, fmt.Errorf("cannot create file %q at volume mountpoint %q: %w", k, mountPoint, err)
+					return nil, nil, fmt.Errorf("cannot create file %q at volume mountpoint %q: %w", k, mountPoint, err)
 				}
 				defer f.Close()
 				_, err = f.Write(v)
 				if err != nil {
-					return nil, err
+					return nil, nil, err
 				}
 			}
 		}
@@ -518,7 +537,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 	seccompPaths, err := kube.InitializeSeccompPaths(podYAML.ObjectMeta.Annotations, options.SeccompProfileRoot)
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	var ctrRestartPolicy string
@@ -546,7 +565,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 		err = specgenutil.FillOutSpecGen(podSpec.PodSpecGen.InfraContainerSpec, &infraOptions, []string{})
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 	}
 
@@ -557,12 +576,12 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	// Create the Pod
 	pod, err := generate.MakePod(&podSpec, ic.Libpod)
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	podInfraID, err := pod.InfraContainerID()
 	if err != nil {
-		return nil, err
+		return nil, nil, err
 	}
 
 	if !options.Quiet {
@@ -578,7 +597,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	} else {
 		cwd, err = os.Getwd()
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 	}
 
@@ -586,16 +605,16 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	for _, initCtr := range podYAML.Spec.InitContainers {
 		// Error out if same name is used for more than one container
 		if _, ok := ctrNames[initCtr.Name]; ok {
-			return nil, fmt.Errorf("the pod %q is invalid; duplicate container name %q detected", podName, initCtr.Name)
+			return nil, nil, fmt.Errorf("the pod %q is invalid; duplicate container name %q detected", podName, initCtr.Name)
 		}
 		ctrNames[initCtr.Name] = ""
 		// Init containers cannot have either of lifecycle, livenessProbe, readinessProbe, or startupProbe set
 		if initCtr.Lifecycle != nil || initCtr.LivenessProbe != nil || initCtr.ReadinessProbe != nil || initCtr.StartupProbe != nil {
-			return nil, fmt.Errorf("cannot create an init container that has either of lifecycle, livenessProbe, readinessProbe, or startupProbe set")
+			return nil, nil, fmt.Errorf("cannot create an init container that has either of lifecycle, livenessProbe, readinessProbe, or startupProbe set")
 		}
 		pulledImage, labels, err := ic.getImageAndLabelInfo(ctx, cwd, annotations, writer, initCtr, options)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		for k, v := range podSpec.PodSpecGen.Labels { // add podYAML labels
@@ -628,17 +647,17 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 		}
 		specGen, err := kube.ToSpecGen(ctx, &specgenOpts)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 		specGen.SdNotifyMode = define.SdNotifyModeIgnore
 		rtSpec, spec, opts, err := generate.MakeContainer(ctx, ic.Libpod, specGen, false, nil)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 		opts = append(opts, libpod.WithSdNotifyMode(define.SdNotifyModeIgnore))
 		ctr, err := generate.ExecuteCreate(ctx, ic.Libpod, rtSpec, spec, false, opts...)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		initContainers = append(initContainers, ctr)
@@ -649,12 +668,12 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 	for _, container := range podYAML.Spec.Containers {
 		// Error out if the same name is used for more than one container
 		if _, ok := ctrNames[container.Name]; ok {
-			return nil, fmt.Errorf("the pod %q is invalid; duplicate container name %q detected", podName, container.Name)
+			return nil, nil, fmt.Errorf("the pod %q is invalid; duplicate container name %q detected", podName, container.Name)
 		}
 		ctrNames[container.Name] = ""
 		pulledImage, labels, err := ic.getImageAndLabelInfo(ctx, cwd, annotations, writer, container, options)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		for k, v := range podSpec.PodSpecGen.Labels { // add podYAML labels
@@ -683,18 +702,18 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 		specGen, err := kube.ToSpecGen(ctx, &specgenOpts)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 		specGen.RawImageName = container.Image
 		rtSpec, spec, opts, err := generate.MakeContainer(ctx, ic.Libpod, specGen, false, nil)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 
 		sdNotifyMode := mainSdNotifyMode
 		ctrNotifyMode, err := getSdNotifyMode(annotations, container.Name)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 		if ctrNotifyMode != "" {
 			sdNotifyMode = ctrNotifyMode
@@ -710,7 +729,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 		if sdNotifyMode != "" && sdNotifyMode != define.SdNotifyModeIgnore {
 			proxy, err = notifyproxy.New("")
 			if err != nil {
-				return nil, err
+				return nil, nil, err
 			}
 			sdNotifyProxies = append(sdNotifyProxies, proxy)
 			opts = append(opts, libpod.WithSdNotifySocket(proxy.SocketPath()))
@@ -718,7 +737,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 		ctr, err := generate.ExecuteCreate(ctx, ic.Libpod, rtSpec, spec, false, opts...)
 		if err != nil {
-			return nil, err
+			return nil, nil, err
 		}
 		if proxy != nil {
 			proxy.AddContainer(ctr)
@@ -730,7 +749,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 		// Start the containers
 		podStartErrors, err := pod.Start(ctx)
 		if err != nil && !errors.Is(err, define.ErrPodPartialFail) {
-			return nil, err
+			return nil, nil, err
 		}
 		for id, err := range podStartErrors {
 			playKubePod.ContainerErrors = append(playKubePod.ContainerErrors, fmt.Errorf("starting container %s: %w", id, err).Error())
@@ -743,8 +762,13 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 		errors := make([]error, len(sdNotifyProxies))
 		for i := range sdNotifyProxies {
 			wg.Add(1)
+			defer func() {
+				if err := sdNotifyProxies[i].Close(); err != nil {
+					logrus.Errorf("Closing sdnotify proxy %q: %v", sdNotifyProxies[i].SocketPath(), err)
+				}
+			}()
 			go func(i int) {
-				err := sdNotifyProxies[i].WaitAndClose()
+				err := sdNotifyProxies[i].Wait()
 				if err != nil {
 					err = fmt.Errorf("waiting for sd-notify proxy: %w", err)
 				}
@@ -755,7 +779,11 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 		wg.Wait()
 		for _, err := range errors {
 			if err != nil {
-				return nil, err
+				// Close all proxies on error.
+				for _, proxy := range sdNotifyProxies {
+					_ = proxy.Close()
+				}
+				return nil, nil, err
 			}
 		}
 	}
@@ -770,7 +798,7 @@ func (ic *ContainerEngine) playKubePod(ctx context.Context, podName string, podY
 
 	report.Pods = append(report.Pods, playKubePod)
 
-	return &report, nil
+	return &report, sdNotifyProxies, nil
 }
 
 // getImageAndLabelInfo returns the image information and how the image should be pulled plus as well as labels to be used for the container in the pod.

pkg/systemd/notifyproxy/notifyproxy.go

@@ -14,6 +14,16 @@ import (
 	"github.com/containers/podman/v4/libpod/define"
 	"github.com/coreos/go-systemd/v22/daemon"
 	"github.com/sirupsen/logrus"
+	"golang.org/x/sys/unix"
+)
+
+const (
+	// All constants below are defined by systemd.
+	_notifyRcvbufSize = 8 * 1024 * 1024
+	_notifyBufferMax  = 4096
+	_notifyFdMax      = 768
+	_notifyBarrierMsg = "BARRIER=1"
+	_notifyRdyMsg     = daemon.SdNotifyReady
 )
 
 // SendMessage sends the specified message to the specified socket.
@@ -76,6 +86,10 @@ func New(tmpDir string) (*NotifyProxy, error) {
 		return nil, err
 	}
 
+	if err := conn.SetReadBuffer(_notifyRcvbufSize); err != nil {
+		return nil, fmt.Errorf("setting read buffer: %w", err)
+	}
+
 	errorChan := make(chan error, 1)
 	readyChan := make(chan bool, 1)
 
@@ -100,35 +114,70 @@ func (p *NotifyProxy) waitForReady() {
 	go func() {
 		// Read until the `READY` message is received or the connection
 		// is closed.
-		const bufferSize = 1024
+
+		// See https://github.com/containers/podman/issues/16515 for a description of the protocol.
+		fdSize := unix.CmsgSpace(4)
+		buffer := make([]byte, _notifyBufferMax)
+		oob := make([]byte, _notifyFdMax*fdSize)
 		sBuilder := strings.Builder{}
 		for {
-			for {
+			n, oobn, flags, _, err := p.connection.ReadMsgUnix(buffer, oob)
-				buffer := make([]byte, bufferSize)
-				num, err := p.connection.Read(buffer)
 			if err != nil {
 				if !errors.Is(err, io.EOF) {
 					p.errorChan <- err
 					return
 				}
+				logrus.Errorf("Error reading unix message on socket %q: %v", p.socketPath, err)
 			}
-				sBuilder.Write(buffer[:num])
+
-				if num != bufferSize || buffer[num-1] == '\n' {
+			if n > _notifyBufferMax || oobn > _notifyFdMax*fdSize {
-					// Break as we read an entire line that
+				logrus.Errorf("Ignoring unix message on socket %q: incorrect number of bytes read (n=%d, oobn=%d)", p.socketPath, n, oobn)
-					// we can inspect for the `READY`
+				continue
-					// message.
+			}
-					break
+
+			if flags&unix.MSG_CTRUNC != 0 {
+				logrus.Errorf("Ignoring unix message on socket %q: message truncated", p.socketPath)
+				continue
+			}
+
+			sBuilder.Reset()
+			sBuilder.Write(buffer[:n])
+			var isBarrier, isReady bool
+
+			for _, line := range strings.Split(sBuilder.String(), "\n") {
+				switch line {
+				case _notifyRdyMsg:
+					isReady = true
+				case _notifyBarrierMsg:
+					isBarrier = true
 				}
 			}
 
-			for _, line := range strings.Split(sBuilder.String(), "\n") {
+			if isBarrier {
-				if line == daemon.SdNotifyReady {
+				scms, err := unix.ParseSocketControlMessage(oob)
+				if err != nil {
+					logrus.Errorf("parsing control message on socket %q: %v", p.socketPath, err)
+				}
+				for _, scm := range scms {
+					fds, err := unix.ParseUnixRights(&scm)
+					if err != nil {
+						logrus.Errorf("parsing unix rights of control message on socket %q: %v", p.socketPath, err)
+						continue
+					}
+					for _, fd := range fds {
+						if err := unix.Close(fd); err != nil {
+							logrus.Errorf("closing fd passed on socket %q: %v", fd, err)
+							continue
+						}
+					}
+				}
+				continue
+			}
+
+			if isReady {
 				p.readyChan <- true
-					return
 			}
 		}
-			sBuilder.Reset()
-		}
 	}()
 }
 
@@ -137,8 +186,8 @@ func (p *NotifyProxy) SocketPath() string {
 	return p.socketPath
 }
 
-// close closes the listener and removes the socket.
+// Close closes the listener and removes the socket.
-func (p *NotifyProxy) close() error {
+func (p *NotifyProxy) Close() error {
 	defer os.Remove(p.socketPath)
 	return p.connection.Close()
 }
@@ -158,20 +207,12 @@ type Container interface {
 	ID() string
 }
 
-// WaitAndClose waits until receiving the `READY` notify message and close the
+// WaitAndClose waits until receiving the `READY` notify message. Note that the
-// listener. Note that the this function must only be executed inside a systemd
+// this function must only be executed inside a systemd service which will kill
-// service which will kill the process after a given timeout.
+// the process after a given timeout. If the (optional) container stopped
-// If the (optional) container stopped running before the `READY` is received,
+// running before the `READY` is received, the waiting gets canceled and
-// the waiting gets canceled and ErrNoReadyMessage is returned.
+// ErrNoReadyMessage is returned.
-func (p *NotifyProxy) WaitAndClose() error {
+func (p *NotifyProxy) Wait() error {
-	defer func() {
-		// Closing the socket/connection makes sure that the other
-		// goroutine reading/waiting for the READY message returns.
-		if err := p.close(); err != nil {
-			logrus.Errorf("Closing notify proxy: %v", err)
-		}
-	}()
-
 	// If the proxy has a container we need to watch it as it may exit
 	// without sending a READY message. The goroutine below returns when
 	// the container exits OR when the function returns (see deferred the

pkg/systemd/notifyproxy/notifyproxy_test.go

@@ -18,7 +18,7 @@ func TestNotifyProxy(t *testing.T) {
 	proxy, err := New("")
 	require.NoError(t, err)
 	require.FileExists(t, proxy.SocketPath())
-	require.NoError(t, proxy.close())
+	require.NoError(t, proxy.Close())
 	require.NoFileExists(t, proxy.SocketPath())
 }
 
@@ -28,9 +28,12 @@ func TestWaitAndClose(t *testing.T) {
 	require.FileExists(t, proxy.SocketPath())
 
 	ch := make(chan error)
-
+	defer func() {
+		err := proxy.Close()
+		require.NoError(t, err, "proxy should close successfully")
+	}()
 	go func() {
-		ch <- proxy.WaitAndClose()
+		ch <- proxy.Wait()
 	}()
 
 	sendMessage(t, proxy, "foo\n")

test/system/250-systemd.bats

@@ -397,6 +397,10 @@ EOF
     systemctl start $service_name
     systemctl is-active $service_name
 
+    # Make sure that Podman is the service's MainPID
+    run systemctl show --property=MainPID --value $service_name
+    is "$(</proc/$output/comm)" "podman" "podman is the service mainPID"
+
     # The name of the service container is predictable: the first 12 characters
     # of the hash of the YAML file followed by the "-service" suffix
     yaml_sha=$(sha256sum $yaml_source)
@@ -422,13 +426,13 @@ EOF
     # container.
     run_podman pod kill test_pod
     for i in {0..5}; do
-        run systemctl is-failed $service_name
+        run systemctl is-active $service_name
-        if [[ $output == "failed" ]]; then
+        if [[ $output == "inactive" ]]; then
             break
         fi
         sleep 0.5
     done
-    is "$output" "failed" "systemd service transitioned to 'failed' state"
+    is "$output" "inactive" "systemd service transitioned to 'inactive' state: $service_name"
 
     # Now stop and start the service again.
     systemctl stop $service_name

test/system/260-sdnotify.bats

@@ -206,9 +206,10 @@ metadata:
     app: test
   name: test_pod
 spec:
+  restartPolicy: "Never"
   containers:
   - command:
-    - top
+    - true
     image: $IMAGE
     name: test
     resources: {}
@@ -219,26 +220,26 @@ EOF
     yaml_sha=$(sha256sum $yaml_source)
     service_container="${yaml_sha:0:12}-service"
 
-
     export NOTIFY_SOCKET=$PODMAN_TMPDIR/conmon.sock
     _start_socat
+    wait_for_file $_SOCAT_LOG
 
+    # Will run until all containers have stopped.
     run_podman play kube --service-container=true $yaml_source
+    run_podman container wait $service_container test_pod-test
 
     # Make sure the containers have the correct policy.
     run_podman container inspect test_pod-test $service_container --format "{{.Config.SdNotifyMode}}"
     is "$output" "ignore
 ignore"
 
-    run_podman container inspect $service_container --format "{{.State.ConmonPid}}"
-    mainPID="$output"
-    wait_for_file $_SOCAT_LOG
     # The 'echo's help us debug failed runs
     run cat $_SOCAT_LOG
     echo "socat log:"
     echo "$output"
 
-    is "$output" "MAINPID=$mainPID
+    # The "with policies" test below checks the MAINPID.
+    is "$output" "MAINPID=.*
 READY=1" "sdnotify sent MAINPID and READY"
 
     _stop_socat
@@ -268,11 +269,11 @@ metadata:
   labels:
     app: test
   name: test_pod
-  restartPolicy: "Never"
   annotations:
     io.containers.sdnotify:   "container"
     io.containers.sdnotify/b: "conmon"
 spec:
+  restartPolicy: "Never"
   containers:
   - command:
     - /bin/sh
@@ -333,14 +334,13 @@ ignore"
     run_podman logs $container_a
     is "${lines[0]}" "/run/notify/notify.sock" "NOTIFY_SOCKET is passed to container"
 
+    # Send the READY message.  Doing it in an exec session helps debug
+    # potential issues.
     run_podman exec --env NOTIFY_SOCKET="/run/notify/notify.sock" $container_a /usr/bin/systemd-notify --ready
 
-    # Instruct the container to send the READY
+    # Instruct the container to stop
     run_podman exec $container_a /bin/touch /stop
 
-    run_podman container inspect $service_container --format "{{.State.ConmonPid}}"
-    main_pid="$output"
-
     run_podman container wait $container_a
     run_podman container inspect $container_a --format "{{.State.ExitCode}}"
     is "$output" "0" "container exited cleanly after sending READY message"
@@ -350,9 +350,12 @@ ignore"
     echo "socat log:"
     echo "$output"
 
-    is "$output" "MAINPID=$main_pid
+    is "$output" "MAINPID=.*
 READY=1" "sdnotify sent MAINPID and READY"
 
+    # Make sure that Podman is the service's MainPID
+    main_pid=$(awk -F= '{print $2}' <<< ${lines[0]})
+    is "$(</proc/$main_pid/comm)" "podman" "podman is the service mainPID"
     _stop_socat
 
     # Clean up pod and pause image

test/system/700-play.bats

@@ -123,7 +123,25 @@ spec:
     name: test
     resources: {}
 EOF
-    run_podman play kube --service-container=true $yaml_source
+    # Run `play kube` in the background as it will wait for the service
+    # container to exit.
+    timeout --foreground -v --kill=10 60 \
+        $PODMAN play kube --service-container=true $yaml_source &>/dev/null &
+
+    # Wait for the container to be running
+    container_a=test_pod-test
+    for i in $(seq 1 20); do
+        run_podman "?" container wait $container_a --condition="running"
+        if [[ $status == 0 ]]; then
+            break
+        fi
+        sleep 0.5
+        # Just for debugging
+        run_podman ps -a
+    done
+    if [[ $status != 0 ]]; then
+        die "container $container_a did not start"
+    fi
 
     # The name of the service container is predictable: the first 12 characters
     # of the hash of the YAML file followed by the "-service" suffix