Docs rootfull -> rootful

Some docs say roofull. Change to rootful.

[NO NEW TESTS NEEDED]

Signed-off-by: Ashley Cui <acui@redhat.com>

docs/source/markdown/podman-build.1.md

@@ -685,7 +685,7 @@ suitable group name to use as the default setting for this option.
 
 **NOTE:** When this option is specified by a rootless user, the specified
 mappings are relative to the rootless user namespace in the container, rather
-than being relative to the host as it would be when run rootfull.
+than being relative to the host as it would be when run rootful.
 
 #### **--userns-uid-map**=*mapping*
 
@@ -721,7 +721,7 @@ suitable user name to use as the default setting for this option.
 
 **NOTE:** When this option is specified by a rootless user, the specified
 mappings are relative to the rootless user namespace in the container, rather
-than being relative to the host as it would be when run rootfull.
+than being relative to the host as it would be when run rootful.
 
 #### **--uts**=*how*
 

docs/source/markdown/podman-create.1.md

@@ -704,7 +704,7 @@ Set the network mode for the container. Invalid if using **--dns**, **--dns-opt*
 
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -717,7 +717,7 @@ Valid _mode_ values are:
 - **container:**_id_: Reuse another container's network stack.
 - **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).
@@ -1118,8 +1118,8 @@ option conflicts with the **--userns** and **--subuidname** options. This
 option provides a way to map host UIDs to container UIDs. It can be passed
 several times to map different ranges.
 
-The _from_uid_ value is based upon the user running the command, either rootfull or rootless users.
-* rootfull user:  *container_uid*:*host_uid*:*amount*
+The _from_uid_ value is based upon the user running the command, either rootful or rootless users.
+* rootful user:  *container_uid*:*host_uid*:*amount*
 * rootless user: *container_uid*:*intermediate_uid*:*amount*
 
 When **podman create** is called by a privileged user, the option **--uidmap**

docs/source/markdown/podman-network-reload.1.md

@@ -9,7 +9,7 @@ podman\-network\-reload - Reload network configuration for containers
 ## DESCRIPTION
 Reload one or more container network configurations.
 
-Rootfull Podman relies on iptables rules in order to provide network connectivity. If the iptables rules are deleted,
+Rootful Podman relies on iptables rules in order to provide network connectivity. If the iptables rules are deleted,
 this happens for example with `firewall-cmd --reload`, the container loses network connectivity. This command restores
 the network connectivity.
 

docs/source/markdown/podman-play-kube.1.md

@@ -188,7 +188,7 @@ Note: When joining multiple networks you should use the **--network name:mac=\<m
 Change the network mode of the pod. The host network mode should be configured in the YAML file.
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -200,7 +200,7 @@ Valid _mode_ values are:
 - **none**: Create a network namespace for the container but do not configure network interfaces for it, thus the container has no network connectivity.
 - **container:**_id_: Reuse another container's network stack.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).

docs/source/markdown/podman-pod-create.1.md

@@ -156,7 +156,7 @@ Set the network mode for the pod. Invalid if using **--dns**, **--dns-opt**, or
 
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -169,7 +169,7 @@ Valid _mode_ values are:
 - **container:**_id_: Reuse another container's network stack.
 - **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).

docs/source/markdown/podman-pull.1.md

@@ -117,7 +117,7 @@ Using short names is subject to the risk of hitting squatted registry namespaces
 While it is highly recommended to always use fully-qualified image references, existing deployments using short names may not be easily changed. To circumvent the aforementioned ambiguity, so called short-name aliases can be configured that point to a fully-qualified image reference. Distributions often ship a default shortnames.conf expansion file in /etc/containers/registries.conf.d/ directory. Administrators can use this directory to add their own local short-name expansion files.
 
 When pulling an image, if the user does not specify the complete registry, container engines attempt to expand the short-name into a full name. If the command is executed with a tty, the user will be prompted to select a registry from the
-default list unqualified registries defined in registries.conf. The user's selection is then stored in a cache file to be used in all future short-name expansions. Rootfull short-names are stored in /var/cache/containers/short-name-aliases.conf. Rootless short-names are stored in the $HOME/.cache/containers/short-name-aliases.conf file.
+default list unqualified registries defined in registries.conf. The user's selection is then stored in a cache file to be used in all future short-name expansions. Rootful short-names are stored in /var/cache/containers/short-name-aliases.conf. Rootless short-names are stored in the $HOME/.cache/containers/short-name-aliases.conf file.
 
 For more information on short-names, see `containers-registries.conf(5)`
 

docs/source/markdown/podman-run.1.md

@@ -730,7 +730,7 @@ Set the network mode for the container. Invalid if using **--dns**, **--dns-opt*
 
 Valid _mode_ values are:
 
-- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootfull containers. It is possible to specify these additional options:
+- **bridge[:OPTIONS,...]**: Create a network stack on the default bridge. This is the default for rootful containers. It is possible to specify these additional options:
   - **alias=name**: Add network-scoped alias for the container.
   - **ip=IPv4**: Specify a static ipv4 address for this container.
   - **ip=IPv6**: Specify a static ipv6 address for this container.
@@ -743,7 +743,7 @@ Valid _mode_ values are:
 - **container:**_id_: Reuse another container's network stack.
 - **host**: Do not create a network namespace, the container will use the host's network. Note: The host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
 - **ns:**_path_: Path to a network namespace to join.
-- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootfull containers and **slirp4netns** for rootless ones.
+- **private**: Create a new namespace for the container. This will use the **bridge** mode for rootful containers and **slirp4netns** for rootless ones.
 - **slirp4netns[:OPTIONS,...]**: use **slirp4netns**(1) to create a user network stack. This is the default for rootless containers. It is possible to specify these additional options, they can also be set with `network_cmd_options` in containers.conf:
   - **allow_host_loopback=true|false**: Allow the slirp4netns to reach the host loopback IP (`10.0.2.2`). Default is false.
   - **mtu=MTU**: Specify the MTU to use for this network. (Default is `65520`).
@@ -1185,8 +1185,8 @@ option conflicts with the **--userns** and **--subuidname** options. This
 option provides a way to map host UIDs to container UIDs. It can be passed
 several times to map different ranges.
 
-The _from_uid_ value is based upon the user running the command, either rootfull or rootless users.
-* rootfull user:  *container_uid*:*host_uid*:*amount*
+The _from_uid_ value is based upon the user running the command, either rootful or rootless users.
+* rootful user:  *container_uid*:*host_uid*:*amount*
 * rootless user: *container_uid*:*intermediate_uid*:*amount*
 
 When **podman run** is called by a privileged user, the option **--uidmap**

docs/source/markdown/podman-system-service.1.md

@@ -9,7 +9,7 @@ podman\-system\-service - Run an API service
 ## DESCRIPTION
 The **podman system service** command creates a listening service that will answer API calls for Podman.  You may
 optionally provide an endpoint for the API in URI form.  For example, *unix:///tmp/foobar.sock* or *tcp:localhost:8080*.
-If no endpoint is provided, defaults will be used.  The default endpoint for a rootfull
+If no endpoint is provided, defaults will be used.  The default endpoint for a rootful
 service is *unix:///run/podman/podman.sock* and rootless is *unix://$XDG_RUNTIME_DIR/podman/podman.sock* (for
 example *unix:///run/user/1000/podman/podman.sock*)
 

docs/tutorials/basic_networking.md

@@ -7,15 +7,15 @@
 It seems once people master the basics of containers, networking is one of the first
 aspects they begin experimenting with.  And regarding networking, it takes very
 little experimentation before ending up on the deep end of the pool.  The following
-guide shows the most common network setups for Podman rootfull and rootless containers.
+guide shows the most common network setups for Podman rootful and rootless containers.
 Each setup is supported with an example.
 
 
-## Differences between rootfull and rootless container networking
+## Differences between rootful and rootless container networking
 
 One of the guiding factors on networking for containers with Podman is going to be
 whether or not the container is run by a root user or not.  This is because unprivileged
-users cannot create networking interfaces on the host.  Therefore, with rootfull
+users cannot create networking interfaces on the host.  Therefore, with rootful
 containers, the default networking mode is to use netavark.
 For rootless, the default network
 mode is slirp4netns. Because of the limited privileges, slirp4netns lacks some of
@@ -32,13 +32,13 @@ ports being opened automatically due to running a container with a port mapping
 example).  If container traffic does not seem to work properly, check the firewall
 and allow traffic on ports the container is using. A common problem is that
 reloading the firewall deletes the cni iptables rules resulting in a loss of
-network connectivity for rootfull containers. Podman v3 provides the podman
+network connectivity for rootful containers. Podman v3 provides the podman
 network reload command to restore this without having to restart the container.
 
 ## Basic Network Setups
 
 Most containers and pods being run with Podman adhere to a couple of simple scenarios.
-By default, rootfull Podman will create a bridged network.  This is the most straightforward
+By default, rootful Podman will create a bridged network.  This is the most straightforward
 and preferred network setup for Podman. Bridge networking creates an interface for
 the container on an internal bridge network, which is then connected to the internet
 via Network Address Translation(NAT).  We also see users wanting to use `macvlan`
@@ -79,7 +79,7 @@ command. Containers can be joined to a network when they are created with the
 
 As mentioned earlier, slirp4netns is the default network configuration for rootless
 users.  But as of Podman version 4.0, rootless users can also use netavark.
-The user experience of rootless netavark is very akin to a rootfull netavark, except that
+The user experience of rootless netavark is very akin to a rootful netavark, except that
 there is no default network configuration provided.  You simply need to create a
 network, and the one will be created as a bridge network. If you would like to switch from
 CNI networking to netvaark, you must issue the `podman system reset --force` command.
@@ -95,17 +95,17 @@ will be executed inside an extra network namespace. To join this namespace, use
 
 #### Example
 
-By default, rootfull containers use the netavark for its default network if
+By default, rootful containers use the netavark for its default network if
 you have not migrated from Podman v3.
 In this case, no network name must be passed to Podman.  However, you can create
 additional bridged networks with the podman create command.
 
 The following example shows how to set up a web server and expose it to the network
-outside the host as both rootfull and rootless.  It will also show how an outside
+outside the host as both rootful and rootless.  It will also show how an outside
 client can connect to the container.
 
 ```
-(rootfull) $ sudo podman run -dt --name webserver -p 8080:80 quay.io/libpod/banner
+(rootful) $ sudo podman run -dt --name webserver -p 8080:80 quay.io/libpod/banner
 00f3440c7576aae2d5b193c40513c29c7964e96bf797cf0cc352c2b68ccbe66a
 ```
 
@@ -120,7 +120,7 @@ how the host and container ports can be mapped for external access.  The port co
 very well have been 80 as well (except for rootless users).
 
 To connect from an outside client to the webserver, simply point an HTTP client to
-the host’s IP address at port 8080 for rootfull and port 8081 for rootless.
+the host’s IP address at port 8080 for rootful and port 8081 for rootless.
 ```
 (outside_host): $ curl 192.168.99.109:8080
    ___           __

test/system/500-networking.bats

@@ -83,7 +83,7 @@ load helpers
 }
 
 # Issue #5466 - port-forwarding doesn't work with this option and -d
-@test "podman networking: port with --userns=keep-id for rootless or --uidmap=* for rootfull" {
+@test "podman networking: port with --userns=keep-id for rootless or --uidmap=* for rootful" {
     for cidr in "" "$(random_rfc1918_subnet).0/24"; do
         myport=$(random_free_port 52000-52999)
         if [[ -z $cidr ]]; then

test/system/helpers.bash

@@ -423,7 +423,7 @@ function skip_if_rootless() {
 ######################
 function skip_if_not_rootless() {
     if ! is_rootless; then
-        local msg=$(_add_label_if_missing "$1" "rootfull")
+        local msg=$(_add_label_if_missing "$1" "rootful")
         skip "${msg:-not applicable under rootlfull podman}"
     fi
 }