These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Add test to verify that updates without a pids-limit specified no longer
overwrite the previous value.
Also fixes erroneous warning generated by remote clients:
"Resource limits are not supported and ignored on cgroups V1 rootless
systems"
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Added the functionality for a user to update the PIDs limit for a
container.
Fixes: #16543
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
If you are running temporary containers within podman play kube
we should really be running these in read-only mode. For automotive
they plan on running all of their containers in read-only temporal
mode. Adding this option guarantees that the container image is not
being modified during the running of the container.
The containers can only write to tmpfs mounted directories.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Use `Default()` instead of re-loading containers.conf.
Also rework how the containers.conf objects are handled for parsing the
CLI. Previously, we were conflating "loading the defaults" with
"storing values from the CLI" with "libpod may further change fields"
which ultimately led to various bugs and test failues.
To address the issue, separate the defaults from the values from the CLI
and properly name the fields to make the semantics less ambiguous.
[NO NEW TESTS NEEDED] as it's not a functional change.
Fixes: containers/common/issues/1200
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
implement podman pod clone, a command to create an exact copy of a pod while changing
certain config elements
current supported flags are:
--name change the pod name
--destroy remove the original pod
--start run the new pod on creation
and all infra-container related flags from podman pod create (namespaces etc)
resolves#12843
Signed-off-by: cdoern <cdoern@redhat.com>
For some reason commit 5b79cf15a0 moved the container create options
parsing from cmd/podman/common to pkg/api/handlers. However it did not
remove the old code. Unfortunately it moved the code from an outdated
version and did not update it before this commit was merged.
Therefore a couple of regressions were introduced. I manually compared
both versions and found three missing bugfixes.
I fixed the network test again that was changed in bce97a3b5d. We
want bridge as default even as rootless. Sine the test is not run as
rootless in CI the regression was not caught.
Also the no hosts test never worked since it was missing the import
check if the hosts file exists.
I don't think we can check for the volume parsing change since this only
works on windows/wsl.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The default log driver is not used when using play kube
without --log-driver. The LogDriver function needs to
be called in order to use the default log driver.
fixes#13781
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
Based on WSL2 9p support: remaps windows paths to /mnt/<drive> locations for
both podman and Docker API clients.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
For better docker compatibility we should use the bridge network mode as
default for rootless. This was already done previously but commit
535818414c introduced this regression in v4.0.
Since the apiv2 test are only run rootful we cannot catch this problem
in CI.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The API endpoints should properly honour the `no_hosts=true` setting in
containers.conf.
Fixes#13719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Docker Compose v2.0 passes mount specifications in two different
places: Volumes (just the destination) and Mounts (full info
provided - source, destination, etc). This was causing Podman to
refuse to create containers, as the destination was used twice.
Deduplicate between Mounts and Volumes, preferring volumes, to
resolve this.
Fixes#11822
Signed-off-by: Matthew Heon <mheon@redhat.com>
The permissions on disk were wrong since we were not converting to
octal.
Fixes: https://github.com/containers/podman/issues/13108
[NO NEW TESTS NEEDED] Since we don't currently test using the docker
client
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Kernel memory option has been depracated in runtime-spec, It is
believed that it will not work properly on certain kernels. runc
ignores it.
This PR removes documentation of the flag and also prints a warning if
a user uses it.
[NO NEW TESTS NEEDED]
Helps Fix: https://github.com/containers/podman/issues/12045
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
Implement a new network interface to abstract CNI from libpod. The
interface is implemented for the CNI backend but in the future we can
add more backends.
The code is structured in three new packages:
- `libpod/network/types`: contains the interface definition
and the necessary types for it.
- `libpod/network/cni` contains the interface implementation for the CNI
backend.
- `libpod/network/util` a set of utility functions related to
networking.
The CNI package uses ginkgo style unit tests. To test Setup/Teardown the
test must be run as root. Each test will run in their own namespace to
make the test independent from the host environment.
New features with the CNI backend:
- The default network will be created in memory if it does not exists on
disk.
- It can set more than one static IP per container network.
- Networks are loaded once from disk and only if this interface is
used, e.g. for commands such as `podman info` networks are not loaded.
This reduces unnecessary disk IO.
This commit only adds the interface it is not wired into libpod. This
requires a lot of breaking changes which will be done in a followup
commit.
Once this is integrated into libpod the current network code under
`libpod/network` should be removed. Also the dependency on OCICNI
should be dropped.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Execution domains tell Linux how to map signal numbers into signal actions.
The execution domain system allows Linux to provide limited support for binaries
compiled under other UNIX-like operating systems.
Reference: https://man7.org/linux/man-pages/man2/personality.2.html
Signed-off-by: flouthoc <flouthoc.git@gmail.com>
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Compat healthcheck tests are of the format []string but podman's were of
the format string. Converted podman's to []string at the specgen level since it has the same effect
and removed the incorrect parsing of compat healthchecks.
fixes#10617
Signed-off-by: cdoern <cdoern@redhat.com>
Compat healthcheck tests are of the format []string but podman's were of
the format string. Converted podman's to []string at the specgen level since it has the same effect
and removed the incorrect parsing of compat healthchecks.
fixes#10617
Signed-off-by: cdoern <cdoern@redhat.com>
The rework of namespace handling for rootless CNI broke this, as
CNI networks were being computed incorrectly. Fix handling of
CNI networks for the Compat Create REST API for containers, and
add a test so we don't regress again.
Fixes#10569
Signed-off-by: Matthew Heon <mheon@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Parse the slirp4netns network options when called via compat api. The
options must be extracted from the NetworkMode string.
Fixes#10110
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
timesince
Jan Rodák
Matt Heon
Paul Holzinger
Jason T. Greene
OpenShift Merge Robot
Jake Correnti
Daniel J Walsh
Valentin Rothberg
cdoern
Niall Crowe
Giuseppe Scrivano
Valentin Rothberg
Brent Baude
Matej Vasek
Jhon Honce
cdoern
Shivkumar13
Milivoje Legenovic
flouthoc
zhangguanzhang
Paul Holzinger
wuhua.ck
Matthew Heon
Pablo Greco