Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Want to allow users to specify --security-opt unmask=/proc/*.
This allows us to run podman within podman more securely, then
specifing umask=all, also gives the user more flexibilty.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
when using the compatibility api to create containers, now reflect the
use of k8s-file as json-file so that clients, which are
unaware of k8s-file, can work. specifically, if the container is using
k8s-file as the log driver, we change the log type in container
inspection to json-file. These terms are used interchangably in other
locations in libpod/podman.
this fixes log messages in compose as well.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
Add the systempaths=unconfined option to --security-opt
to match the docker options for unmasking all the paths
that are masked by default.
Add the mask and unmask options to the podman create doc.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add the mask and unmask option to the --security-opt flag
to allow users to specify paths to mask and unmask in the
container. If unmask=ALL, this will unmask all the paths we
mask by default.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Stop over wrapping API Calls
The API calls will return an appropriate error, and this wrapping
just makes the error message look like it is stuttering and a
big mess.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman can now support adding network aliases when running containers
(--network-alias). It requires an updated dnsname plugin as well as an
updated ocicni to work properly.
Signed-off-by: baude <bbaude@redhat.com>
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Docker supports log-opt max_size and so does conmon (ALthough poorly).
Adding support for this allows users to at least make sure their containers
logs do not become a DOS vector.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman needs to use the environment settings in containers.conf
when setting up the containers.
Also host environment variables should be relative to server side
not the client.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
it allows to manually tweak the configuration for cgroup v2.
we will expose some of the options in future as single
options (e.g. the new memory knobs), but for now add the more generic
--cgroup-conf mechanism for maximum control on the cgroup
configuration.
OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040
Requires: https://github.com/containers/crun/pull/459
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
it allows to customize the options passed down to the OCI runtime for
setting up the /proc mount.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This matches Docker behavior, and seems to make sense - the CMD
may have been specific to the original entrypoint and probably
does not make sense if it was changed.
While we're in here, greatly simplify the logic for populating
the SpecGen's Command. We create the full command when making the
OCI spec, so the client should not be doing any more than setting
it to the Command the user passed in, and completely ignoring
ENTRYPOINT.
Fixes#7115
Signed-off-by: Matthew Heon <mheon@redhat.com>
For some reason we were overwriting memory when handling both
--pid=host and --ipc=host. Simplified the code to handle this
correctly, and add test to make sure it does not happen again.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently you can not apply an ApparmorProfile if you specify
--privileged. This patch will allow both to be specified
simultaniosly.
By default Apparmor should be disabled if the user
specifies --privileged, but if the user specifies --security apparmor:PROFILE,
with --privileged, we should do both.
Added e2e run_apparmor_test.go
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
If the user runs a container like
podman run --security-opt seccomp=unconfined --security-opt label=type:spc_t --security-opt label=level:s0 ...
Podman inspect was only showing the second option
This change will show
"SecurityOpt": [
"label=type:spc_t,label=level:s0:c60",
"seccomp=unconfined"
],
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When going through the output of `podman inspect` to try and
identify another issue, I noticed that Podman 2.0 was setting
StopSignal to 0 on containers by default. After chasing it
through the command line and SpecGen, I determined that we were
actually not setting a default in Libpod, which is strange
because I swear we used to do that. I re-added the disappeared
default and now all is well again.
Also, while I was looking for the bug in SpecGen, I found a bunch
of TODOs that have already been done. Eliminate the comments for
these.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Ashley Cui
OpenShift Merge Robot
Giuseppe Scrivano
Daniel J Walsh
wuhua.ck
Matthew Heon
Paul Holzinger
Valentin Rothberg
baude
Josh Soref
Urvashi Mohnani
Jordan Christiansen
zhangguanzhang
Matthew Heon
Qi Wang
Ralf Haferkamp
Joseph Gooch