allow a container to run in a new cgroup namespace.
When running in a new cgroup namespace, the current cgroup appears to
be the root, so that there is no way for the container to access
cgroups outside of its own subtree.
By default it uses --cgroup=host to keep the previous behavior.
To create a new namespace, --cgroup=private must be provided.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When we first began writing Podman, we ran into a major issue
when implementing Inspect. Libpod deliberately does not tie its
internal data structures to Docker, and stores most information
about containers encoded within the OCI spec. However, Podman
must present a CLI compatible with Docker, which means it must
expose all the information in 'docker inspect' - most of which is
not contained in the OCI spec or libpod's Config struct.
Our solution at the time was the create artifact. We JSON'd the
complete CreateConfig (a parsed form of the CLI arguments to
'podman run') and stored it with the container, restoring it when
we needed to run commands that required the extra info.
Over the past month, I've been looking more at Inspect, and
refactored large portions of it into Libpod - generating them
from what we know about the OCI config and libpod's (now much
expanded, versus previously) container configuration. This path
comes close to completing the process, moving the last part of
inspect into libpod and removing the need for the create
artifact.
This improves libpod's compatability with non-Podman containers.
We no longer require an arbitrarily-formatted JSON blob to be
present to run inspect.
Fixes: #3500
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If the image was built with "HEALTHCHECK NONE" then we should create a
container without healthcheck configuration. Otherwise executing the
healthcheck on the container will return "unhealthy" instead of the
correct error message that the container doesn't have a healthcheck.
We also ignore the healthcheck configuration if the command list is
empty or the command string is empty.
Fixes#3525
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
If the image doesn't provide any options, e.g. interval, timeout, etc.,
then apply the Docker defaults when creating the container. Otherwise
the defaults will be left 0 and podman doesn't schedule the healtcheck
service & timer for the container or incorrectly reports unhealthy state
when the check is executed.
Fixes#3525
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Fix Docker CLI compatibility issue: the "--healthcheck-command" option
value should not be split but instead be passed as single string to
"CMD-SHELL", i.e. "/bin/sh -c <opt>".
On the other hand implement the same extension as is already available
for "--entrypoint", i.e. allow the option value to be a JSON array of
strings. This will make life easier for tools like podman-compose.
Updated "--healthcheck-command" option values in tests accordingly.
Continuation of #3455 & #3507
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
This flag passes the host environment into the container. The basic idea is to
leak all environment variables from the host into the container.
Environment variables from the image, and passed in via --env and --env-file
will override the host environment.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With StringSlice, we're seeing individual options added and
parsed separately, so `tmpfs:nosuid,nodev` turns into three tmpfs
mounts passed into pkg/sec (tmpfs:, nosuid, nodev). Swap to
StringArray to tell cobra this can't be split on commas.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Four of the healthcheck tests were completely broken. They
were written with the option '--healthcheck-cmd' which is
not an option (it should be '--healthcheck-command', with
'command' as a full word). The tests were merely checking
exit code, not error message, so of course they failed.
I have fixed the command line and added checks for the
expected diagnostic.
(Side note: do not write tests that check exit code but
nothing else. This should not need to be said).
One of the four tests was invalid: --healthcheck-interval 0.5s.
Per Brent:
initially i was going to restrict sub one-second intervals
That test has been removed. It would probably be a good idea
for a future PR to add some validation such as preventing
negative values, but that's left as an exercise for later.
Also: grammar fix in an error message.
Caught by my ginkgo log greasemonkey script, which
highlights 'Error' messages and grabbed my attention.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a journald reader that translates the journald entry to a k8s-file formatted line, to be added as a log line
Note: --follow with journald hasn't been implemented. It's going to be a larger undertaking that can wait.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
it creates a namespace where the current UID:GID on the host is mapped
to the same UID:GID in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Unify handling for the --volume, --mount, --volumes-from, --tmpfs
and --init flags into a single file and set of functions. This
will greatly improve readability and maintainability.
Further, properly handle superceding and conflicting mounts. Our
current patchwork has serious issues when mounts conflict, or
when a mount from --volumes-from or an image volume should be
overwritten by a user volume or named volume.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Play kube was passing the pod, but CreateConfig was not. Unify it
so they both do, so we can remove some unnecessary duplicate
lookup code.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The goal here is to keep only the configuration directly used to
build the container in CreateConfig, and scrub temporary state
and helpers that we need to generate. We'll keep those internally
in MakeContainerConfig.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Right now, there are two major API calls necessary to turn a
filled-in CreateConfig into the options and OCI spec necessary to
make a libpod Container. I'm intending on refactoring both of
these extensively to unify a few things, so make a common
frontend to both that will prevent API changes from leaking out
of the package.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The --read-only-tmpfs option caused podman to mount tmpfs on /run, /tmp, /var/tmp
if the container is running int read-only mode.
The default is true, so you would need to execute a command like
--read-only --read-only-tmpfs=false to turn off this behaviour.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add the ability to create and run containers via the podman-remote
client.
we now create an intermediate layer from the the create/run cli flags.
the intermediate layer can be converted into a createconfig or into a
varlink struct. Once transported, the varlink struct can be converted
back to an intermediate layer and then to a createconfig.
remote terminals are not supported yet.
Signed-off-by: baude <bbaude@redhat.com>
simplify the rootless implementation to use a single user namespace
for all the running containers.
This makes the rootless implementation behave more like root Podman,
where each container is created in the host environment.
There are multiple advantages to it: 1) much simpler implementation as
there is only one namespace to join. 2) we can join namespaces owned
by different containers. 3) commands like ps won't be limited to what
container they can access as previously we either had access to the
storage from a new namespace or access to /proc when running from the
host. 4) rootless varlink works. 5) there are only two ways to enter
in a namespace, either by creating a new one if no containers are
running or joining the existing one from any container.
Containers created by older Podman versions must be restarted.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
in the few places where we care about skipping the storage
initialization, we can simply use the process effective UID, instead
of relying on a global boolean flag.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
podman will not start a transient service and timer for healthchecks.
this handles the tracking of the timing for health checks.
added the 'started' status which represents the time that a container is
in its start-period.
the systemd timing can be disabled with an env variable of
DISABLE_HC_SYSTEMD="true".
added filter for ps where --filter health=[starting, healthy, unhealthy]
can now be used.
Signed-off-by: baude <bbaude@redhat.com>
integration of healthcheck into create and run as well as inspect.
healthcheck enhancements are as follows:
* add the following options to create|run so that non-docker images can
define healthchecks at the container level.
* --healthcheck-command
* --healthcheck-retries
* --healthcheck-interval
* --healthcheck-start-period
* podman create|run --healthcheck-command=none disables healthcheck as
described by an image.
* the healthcheck itself and the healthcheck "history" can now be
observed in podman inspect
* added the wiring for healthcheck history which logs the health history
of the container, the current failed streak attempts, and log entries
for the last five attempts which themselves have start and stop times,
result, and a 500 character truncated (if needed) log of stderr/stdout.
The timings themselves are not implemented in this PR but will be in
future enablement (i.e. next).
Signed-off-by: baude <bbaude@redhat.com>
to prepare for being able to remotely run a container, we need to
perform a refactor to get code out of main because it is not
reusable. the shared location is a good starting spot though
eventually some will likely end up in pkg/spec/ at some point.
Signed-off-by: baude <bbaude@redhat.com>
Giuseppe Scrivano
Matthew Heon
Stefan Becker
OpenShift Merge Robot
Daniel J Walsh
baude
Ed Santiago
Peter Hunt
Chris Evich
James Cassell
Sascha Grunert