faith/camelcase has been archived and is no longer maintained.
The package is sufficiently small and self-contained enough to
maintain it in libpod.
Fixes: #4783
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
`gocritic` is a powerful linter that helps in preventing certain kinds
of errors as well as enforcing a coding style.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when creating a keep-id namespace, we split the original user
namespace in:
inner ns | outer ns | size:
0 | 1 | ID
ID | 0 | 1
ID+1 | ID+1 | availableIds - ID
When the user ID is bigger than the number of available
subuids/subgids we fail to create the user namespace because the first
slice is bigger than the available number of IDs and the third one has
a negative size.
Fix it by not using more than the available number of IDs in the first
slice and creating the third one only if there are other IDs left.
When the user ID is bigger than the number of additional IDs, there
will be a gap between the two mappings so the IDs between the maximum
additional ID and the user ID won't be present inside of the
namespace.
Closes: https://github.com/containers/libpod/issues/4838
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The helper function we use for signal name mapping does not
check for negative numbers nor invalid (too-high) ones. This
can yield unexpected error messages:
# podman kill -s -1 foo
ERRO[0000] unknown signal "18446744073709551615"
This PR introduces a small wrapper for it that:
1) Strips off a leading dash, allowing '-1' or '-HUP'
as valid inputs; and
2) Rejects numbers <1 or >64 (SIGRTMAX)
Also adds a test suite checking signal handling as well as
ensuring that invalid signals are rejected by the command line.
Fixes: #4746
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently, we return a runtime directory of the form
`/run/user/<uid>`, even when running as root. Depending on configuration,
that directory may be deleted when the user logs out, which is quite
awkward when the container is started as a systemd service and then
someone logs in and out as root.
This patch fixes the problem by returning an empty runtime directory if the
container is being started by root. The runtime should automatically use
the default runtime directory (`/run/crun` when crun is used), which should
be accessible to root.
Tested in Fedora 31 by running containers under both root and a regular
user. State for root containers is stored in `/run/crun`, while state for
rootless containers is in `/run/user/<uid>/crun`.
Signed-off-by: Jonathan Dieter <jdieter@gmail.com>
Return types had to change a bit for this, but since we can wrap
the old v1.ImageConfig, changes are overall not particularly bad.
At present, I believe this only works with commit, not import.
This matches how things were before we changed to the new parsing
so I think this is fine.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The way we were trying to parse was very broken. I originally
attempted to use Buildah's Dockerfile parser here, but dealing
with it (and convincing it to accept only a limited subset, and
only one instruction at a time) was challenging, so I rewrote a
subset of Dockerfile parsing. This should handle most common
cases well, though there are definitely unhandled edge cases for
ENV and LABEL.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
make sure the user overrides are stored in the configuration file when
first created.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
currently, podman import change do not support syntax like
- KEY val
- KEY ["val"]
This adds support for both of these syntax along with KEY=val
Signed-off-by: Kunal Kushwaha <kunal.kushwaha@gmail.com>
This change matches what is happening on the podman local side
and should eliminate a race condition.
Also exit commands on the server side should start to return to client.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Do not require 0755 permissons for the ~/.config directory but require
at least 0700 which should be sufficient. The current implementation
internally creates this directory with 0755 if it does not exist, but if the
directory already exists with different perissions the current code returns
an empty string.
Signed-off-by: Christian Felder <c.felder@fz-juelich.de>
For read-only containers set to create tmpfs filesystems over
/run and other common destinations, we were incorrectly setting
mount options, resulting in duplicate mount options.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If I mount, say, /usr/bin into my container - I expect to be able
to run the executables in that mount. Unconditionally applying
noexec would be a bad idea.
Before my patches to change mount options and allow exec/dev/suid
being set explicitly, we inferred the mount options from where on
the base system the mount originated, and the options it had
there. Implement the same functionality for the new option
handling.
There's a lot of performance left on the table here, but I don't
know that this is ever going to take enough time to make it worth
optimizing.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Previously, we explicitly set noexec/nosuid/nodev on every mount,
with no ability to disable them. The 'mount' command on Linux
will accept their inverses without complaint, though - 'noexec'
is counteracted by 'exec', 'nosuid' by 'suid', etc. Add support
for passing these options at the command line to disable our
explicit forcing of security options.
This also cleans up mount option handling significantly. We are
still parsing options in more than one place, which isn't good,
but option parsing for bind and tmpfs mounts has been unified.
Fixes: #3819Fixes: #3803
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Docker has unlimited tmpfs size where Podman had it set to 64mb. Should be standard between the two.
Remove noexec default
Signed-off-by: Ashley Cui <ashleycui16@gmail.com>
Requirement from https://github.com/containers/libpod/issues/3575#issuecomment-512238393
Added --pull for podman create and pull to match the newly added flag in docker CLI.
`missing`: default value, podman will pull the image if it does not exist in the local.
`always`: podman will always pull the image.
`never`: podman will never pull the image.
Signed-off-by: Qi Wang <qiwan@redhat.com>
rework an error path so that users can run the windows remote client.
also, create the basedir path for the podman-remote.conf file if it does
not exist already.
Signed-off-by: baude <bbaude@redhat.com>
Drop errors to debug when trying to setup the runtimetmpdir. If the tool
can not setup a runtime dir, it will error out with a correct message
no need to put errors on the screen, when the tool actually succeeds.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number
of man pages. Make use of the XDG_CONFIG_HOME environment variable
in a rootless environment if available, or set it if not.
Also added a number of links to the Rootless Podman config page and
added the location of the auth.json files to that doc.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
clean up some final linter issues and add a make target for
golangci-lint. in addition, begin running the tests are part of the
gating tasks in cirrus ci.
we cannot fully shift over to the new linter until we fix the image on
the openshift side. for short term, we will use both
Signed-off-by: baude <bbaude@redhat.com>
When we first began writing Podman, we ran into a major issue
when implementing Inspect. Libpod deliberately does not tie its
internal data structures to Docker, and stores most information
about containers encoded within the OCI spec. However, Podman
must present a CLI compatible with Docker, which means it must
expose all the information in 'docker inspect' - most of which is
not contained in the OCI spec or libpod's Config struct.
Our solution at the time was the create artifact. We JSON'd the
complete CreateConfig (a parsed form of the CLI arguments to
'podman run') and stored it with the container, restoring it when
we needed to run commands that required the extra info.
Over the past month, I've been looking more at Inspect, and
refactored large portions of it into Libpod - generating them
from what we know about the OCI config and libpod's (now much
expanded, versus previously) container configuration. This path
comes close to completing the process, moving the last part of
inspect into libpod and removing the need for the create
artifact.
This improves libpod's compatability with non-Podman containers.
We no longer require an arbitrarily-formatted JSON blob to be
present to run inspect.
Fixes: #3500
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
These are only used on OS X Docker, and ignored elsewhere - but
since they are ignored, they're guaranteed to be safe everywhere,
and people are using them.
Fixes: #3340
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it creates a namespace where the current UID:GID on the host is mapped
to the same UID:GID in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
use a pause process to keep the user and mount namespace alive.
The pause process is created immediately on reload, and all successive
Podman processes will refer to it for joining the user&mount
namespace.
This solves all the race conditions we had on joining the correct
namespaces using the conmon processes.
As a fallback if the join fails for any reason (e.g. the pause process
was killed), then we try to join the running containers as we were
doing before.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We were always raising an error when the rootless user attempted to
setup resources, but this is not the case anymore with cgroup v2.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
build a podman-remote binary for windows that allows users to use the
remote client on windows and interact with podman on linux system.
Signed-off-by: baude <bbaude@redhat.com>
Valentin Rothberg