We intend to migrate to the cobra cli from urfave/cli because the
project is more well maintained. There are also some technical reasons
as well which extend into our remote client work.
Signed-off-by: baude <bbaude@redhat.com>
We were never loading the storage.conf file to grab mountOptions.
This is causing us to not use metacopyup option when running with
overlay.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add support for podman volume and its subcommands.
The commands supported are:
podman volume create
podman volume inspect
podman volume ls
podman volume rm
podman volume prune
This is a tool to manage volumes used by podman. For now it only handle
named volumes, but eventually it will handle all volumes used by podman.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Part of the motivation for 800eb863 (Hooks supports two directories,
process default and override, 2018-09-17, #1487) was [1]:
> We only use this for override. The reason this was caught is people
> are trying to get hooks to work with CoreOS. You are not allowed to
> write to /usr/share... on CoreOS, so they wanted podman to also look
> at /etc, where users and third parties can write.
But we'd also been disabling hooks completely for rootless users. And
even for root users, the override logic was tricky when folks actually
had content in both directories. For example, if you wanted to
disable a hook from the default directory, you'd have to add a no-op
hook to the override directory.
Also, the previous implementation failed to handle the case where
there hooks defined in the override directory but the default
directory did not exist:
$ podman version
Version: 0.11.2-dev
Go Version: go1.10.3
Git Commit: "6df7409cb5a41c710164c42ed35e33b28f3f7214"
Built: Sun Dec 2 21:30:06 2018
OS/Arch: linux/amd64
$ ls -l /etc/containers/oci/hooks.d/test.json
-rw-r--r--. 1 root root 184 Dec 2 16:27 /etc/containers/oci/hooks.d/test.json
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:31:19-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:31:19-08:00" level=warning msg="failed to load hooks: {}%!(EXTRA *os.PathError=open /usr/share/containers/oci/hooks.d: no such file or directory)"
With this commit:
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /etc/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="added hook /etc/containers/oci/hooks.d/test.json"
time="2018-12-02T21:33:07-08:00" level=debug msg="hook test.json matched; adding to stages [prestart]"
time="2018-12-02T21:33:07-08:00" level=warning msg="implicit hook directories are deprecated; set --hooks-dir="/etc/containers/oci/hooks.d" explicitly to continue to load hooks from this directory"
time="2018-12-02T21:33:07-08:00" level=error msg="container create failed: container_linux.go:336: starting container process caused "process_linux.go:399: container init caused \"process_linux.go:382: running prestart hook 0 caused \\\"error running hook: exit status 1, stdout: , stderr: oh, noes!\\\\n\\\"\""
(I'd setup the hook to error out). You can see that it's silenly
ignoring the ENOENT for /usr/share/containers/oci/hooks.d and
continuing on to load hooks from /etc/containers/oci/hooks.d.
When it loads the hook, it also logs a warning-level message
suggesting that callers explicitly configure their hook directories.
That will help consumers migrate, so we can drop the implicit hook
directories in some future release. When folks *do* explicitly
configure hook directories (via the newly-public --hooks-dir and
hooks_dir options), we error out if they're missing:
$ podman --hooks-dir /does/not/exist run --rm docker.io/library/alpine echo 'successful container'
error setting up OCI Hooks: open /does/not/exist: no such file or directory
I've dropped the trailing "path" from the old, hidden --hooks-dir-path
and hooks_dir_path because I think "dir(ectory)" is already enough
context for "we expect a path argument". I consider this name change
non-breaking because the old forms were undocumented.
Coming back to rootless users, I've enabled hooks now. I expect they
were previously disabled because users had no way to avoid
/usr/share/containers/oci/hooks.d which might contain hooks that
required root permissions. But now rootless users will have to
explicitly configure hook directories, and since their default config
is from ~/.config/containers/libpod.conf, it's a misconfiguration if
it contains hooks_dir entries which point at directories with hooks
that require root access. We error out so they can fix their
libpod.conf.
[1]: https://github.com/containers/libpod/pull/1487#discussion_r218149355
Signed-off-by: W. Trevor King <wking@tremily.us>
Previous commits ensured that we would use database-configured
paths if not explicitly overridden.
However, our runtime generation did unconditionally override
storage config, which made this useless.
Move rootless storage configuration setup to libpod, and change
storage setup so we only override if a setting is explicitly
set, so we can still override what we want.
Signed-off-by: Matthew Heon <mheon@redhat.com>
ALso cleanup files section or podman man page
Add description of policy.json
Sort alphabetically.
Add more info on oci hooks
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1487
Approved by: umohnani8
Create two new createInit for checking if the cotnainer is initialized
correctly.
createContainer which creates the actual container and containerConfig
Also added libpodruntime.GetContainerRuntime to put common runtime code
into separate function.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Need to get some small changes into libpod to pull back into buildah
to complete buildah transition.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1270
Approved by: mheon
If user does not pass in cgroup manager and running in rootless mode,
then we need to force the cgroupfs support until/unless we get support
for rootless systemd support.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1261
Approved by: mheon
When running podman as non root user always create an userNS and let
the OCI runtime use it.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #936
Approved by: rhatdan
And add an argument to WithHooksDir to set it.
If the hook dir doesn't exist, the new hooks package considers that a
fatal error. When a podman caller sets
--hooks-dir-path=/some/typoed/directory, a fatal error is more helpful
than silently not loading any hooks. However, callers who call podman
without setting --hooks-dir-path may not need hooks at all. We don't
want to pester those callers with not-exist errors. With this commit,
we:
* Assume the caller knows what they're doing if they set
--hooks-dir-path and set HooksDirNotExistFatal.
* If the caller does not explicitly set --hooks-dir-path, assume they
won't mind if the hook directory is missing and set
HooksDirNotExistFatal false.
We also considered checking for the directory's existence in the code
calling WithHooksDir or from within WithHooksDir, but checks there
would race with the underlying ioutil.ReadDir in the hooks package.
By pushing the warn/error decision down into libpod's implementation,
we avoid a racy "do we expect this to work once libpod gets to it?"
pre-check.
I've also added a check to error if WithHooksDir is called with an
empty-string argument, because we haven't defined the semantics of
that (is it clearing a previous value? Is it effectively the same as
the current directory?). I agree with Matthew that a separate
WithNoHooks, or a *string argument to WithHooks, or some such would be
a better API for clearing previous values [1]. But for now, I'm just
erroring out to fail early for callers who might otherwise be
surprised that libpod ignores empty-string HooksDir.
[1]: https://github.com/projectatomic/libpod/pull/686#issuecomment-385119370
Signed-off-by: W. Trevor King <wking@tremily.us>
Closes: #686
Approved by: mheon
implement varlink image functions for working with libpod with the exception of a
couple due to incompletions on the libpod side of things (build).
also, created a first pass at a libpodpy package which will stand as a client to
working with libpod's varlink methods using python.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #669
Approved by: baude
Matthew Heon
Giuseppe Scrivano
baude
Daniel J Walsh
umohnani8
OpenShift Merge Robot
W. Trevor King
Matthew Heon
haircommander
Matthew Heon