If we're logging at trace level, use %+v instead of %v when printing an
error at exit. If the error included stack information, this will cause
the backtrace to be printed, which is very handy for debugging.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
"trace" is a valid logrus debugging level, so we should be able to tell
the library to display messages logged at that level.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Add a new --rootless-cni option to podman unshare to also join the
rootless-cni network namespace. This is useful if you want to connect
to a rootless container via IP address. This is only possible from the
rootless-cni namespace and not from the host namespace. This option also
helps to debug problems in the rootless-cni namespace.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For commands that use the golang template library directly add the
compatible template functions
[NO TESTS NEEDED]
Fixes#8773
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The --execute flag ended up serving no purpose. It was removed and
documentation was updated.
Fixed a panic when no VM name was provided.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
Add shell completion for machine names.
[NO TESTS NEEDED]
I would like to add one to the shell completion test however
using podman machine init is to expensive.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
podman machine list lists all virtual machines & indicates the default VM
connection, if it exists. it also can take a --format flag arg as a go
template.
[NO TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
[NO TESTS NEEDED] This PR is mainly documentation and some code cleanup.
Also cleanup and consolidate handling of other hanlding of podman-remote
hidden options.
Fixes: https://github.com/containers/podman/issues/9874
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- Build machine also for podman-linux-arm64
- Add default machine type for linux arm64
- Add the required qemu-uefi bios parameter
- Remove hardcoded outdated path and show url
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Add support for generating powershell completion files. This is especially
useful for people using the podman remote client on windows.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
if LISTEN_FDS is specified by systemd, we need to use the first fd
after the std files (so fd=3) to read from the activation socket
instead of manually opening the UNIX socket.
[NO TESTS NEEDED]
Closes: https://github.com/containers/podman/issues/9251
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Podman machine remove is now called `rm`.
Podman machine create now supports resizing the image to the value of
--disk-size as provided. The default is to 10G.
Added systemd unit file on guest via ignition that sends a Ready message
to the host over a virtio-socket so that we know when the VM is booted
and ready for use.
Podman machine commands no longer require a VM name as an argument. A
default VM name is defined and if no VM name is provided as a arg, the
default will be used.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
Currently pull policy is set incorrectly when users set --pull-never.
Also pull-policy is not being translated correctly when using
podman-remote.
Fixes: #9573
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman only works with --isolation chroot. This PR
fixes this by allowing the isolation mode to default to OCI and to
also allow users to pass the isolation mode into the containers.
The current tests for --isolation should cause this code to be tested.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Rename podman machine create to init because we're initing a VM, not
really creating it
Wire up CPUs flag
Suppress QEMU GUI from popping up when not in debug mode
[NO TESTS NEEDED]
Signed-off-by: Ashley Cui <acui@redhat.com>
podman machine allows podman to create, manage, and interact with a vm
running some form of linux (default is fcos). podman is then configured
to be able to interact with the vm automatically.
while this is usable on linux, the real push is to get this working on
both current apple architectures in macos.
Ashley Cui contributed to this PR and was a great help.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
Podman machine will be a mac-only command that manages the VM where
containers are run. Currently, only the CLI is written and the interface
function for the VM management is stub for future developement
The podman machine cli is only built on mac builds.
Signed-off-by: Ashley Cui <acui@redhat.com>
If you are attempting to run a container in interactive mode, and want
a --tty, then there must be a terminal in use.
Docker exits right away when a user specifies to use a --interactive and
--TTY but the stdin is not a tty.
Currently podman will pull the image and then fail much later.
Podman will continue to run but will print an warning message.
Discussion in : https://github.com/containers/podman/issues/8916
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
User message was the same as in the case of no flag provided.
This commit aligns message with the one used in docker.
[NO TESTS NEEDED]
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The `libpod/network` package should only be used on the backend and not the
client. The client used this package only for two functions so move them
into a new `pkg/network` package.
This is needed so we can put linux only code into `libpod/network`, see #9710.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Copy is full of perils. Some of them are the nuances when copying
directories. Who would have thought that
* cp dir foo
* cp dir/ foo
* cp dir/. foo
are all supposed to yield the same result when foo does not exist.
`podman cp` now supports all three notations, which required to massage
the front-end code in `cmd/podman` a bit. The tests have been extended
and partially rewritten to test container->host and host->container
copy operations.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Remove --volume option from podman-remote since it is
not supported, also add information to podman-build man page
indicating options not supported over remote connections.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --trace has helped in early stages analyze Podman code. However,
it's contributing to dependency and binary bloat. The standard go
tooling can also help in profiling, so let's turn `--trace` into a NOP.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The NanoCpus field in HostConfig was not wired up. It conflicts
with CPU period and quota (it hard-codes period to a specific
value and then sets the user-specified value as Quota).
Fixes#9523
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
It took a lot to figure out exactly how this should work, but I
think I finally have it. My initial versions of this created the
directory with the same owner as the user the container was run
with, which was rather complicated - but after review against
Docker, I have determined that is incorrect, and it's always made
as root:root 0755 (Ubuntu's Docker, which I was using to try and
test, is a snap - and as such it was sandboxed, and not actually
placing directories it made in a place I could find?). This makes
things much easier, since I just need to parse out source
directories for binds and ensure they exist.
Fixes#9510
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Currently podman is ignoreing the build --timestamp flag.
This PR fixes this for local and remote clients.
Fixes: https://github.com/containers/podman/issues/9569
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Since we have no good way to enable this on the server side, we will
just allow it to be set on the client side. This should solve almost all
cases.
Partially fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Create is not formatted as `key=value` but rather `key:value`
(technically `path:option1,option2`). As such we can't use the
stringMapToArray function, and instead need to generate it
manually.
Fixes#9511
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Added ID to default
removed outdated imports
slight refactor
Test Network Headers added to network_test.go
Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
/dev/stdin should not be treated as "-" to remain compatible with Docker
and to have a more consistent and idiomatic interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
/dev/stdout should not be treated as "-" to remain compatible with
Docker and to have a more consistent and idiomatic interface.
Fixes: #9362
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to treat "." and "/." correctly. Both cases imply to copy the
contents of a directory in contrast to the directory. This implies to
unset the KeepDirectoryNames options of the copiah package.
Previously, the code was performing a simple string suffix check which
is not enough since it would match files and directories ending with
".".
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman -s crashes when the user specifies the '{{ .Size }}` format
on the podman ps command, without specifying the --size option.
This PR will stop the crash and print out a logrus.Error stating that
the caller should add the --size option.
Fixes: https://github.com/containers/podman/issues/9408
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The error message when failing to create an image engine unconditionally
pointed to the Podman socket which is quite confusing when running
locally.
Move the error message to the point where the first ping to the service
fails.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we stop a container we are printing the full id,
this does not match Docker behaviour or the start behavior.
We should be printing the users rawInput when we successfully
stop the container.
Fixes: https://github.com/containers/podman/issues/9386
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when printing out json format, we mistakenly changed the Created field
output to be a time.time in a different commit. This allows for
override of the Created field to be a unix ts as type int64.
Fixes: #9315
Signed-off-by: baude <bbaude@redhat.com>
Add the SECRET keyword to the shell completion test. Also update the
use line for podman secret create to use `NAME` instead of `SECRET`.
This matches the other commands such as network/volume create.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
If the --rootfs flag is set podman create/run expect a host
path as first argument. The shell completion should provide
path completion in that case.
[NO TESTS NEEDED]
This can manually be verified with `podman run --rootfs [TAB]`.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Buildah bud passes a bunch more flags then podman build.
We need to implement hook up all of these flags to get full functionality.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add the ability to prune unused cni networks. filters are not implemented
but included both compat and podman api endpoints.
Fixes :#8673
Signed-off-by: baude <bbaude@redhat.com>
The mtu default value is currently forced to 65520.
This let the user control it using the config key network_cmd_options,
i.e.: network_cmd_options=["mtu=9000"]
Signed-off-by: bitstrings <pino.silvaggio@gmail.com>
The `--network` flag is parsed differently for `podman pod create`.
This causes confusion and problems for users. The extra parsing
logic ignored unsupported network options such as `none`,
`container:...` and `ns:...` and instead interpreted them as cni
network names.
Tests are added to ensure the correct errors are shown.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1915332
```
According to the Docker docs, the consistency option should be ignored on Linux.
the possible values are 'cached', 'delegated', and 'consistent', but they should be ignored equally.
This is a widely used option in scripts run by developer machines, as this makes file I/O less horribly slow on MacOS.
```
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
implement remote API for --all and --ignore flags for podman stop
implement remote API for --all flags for podman stop
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fix man page to document podman push --format fully.
Also found that push was not handling the tlsverify so fixed this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This reverts commit 15caebfe56.
The previous behaviour of `--pull` to *always* attempt to pull the image
and error out if the pull failed aligns with Docker. Since Podman aims
at feature parity with Docker, the `--pull` behaviour must match.
Fixes: #9134
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The `--pull` flag should be using the "pull if newer" pull policy rather
than "pull always". This aligns with what the help message states, what
Buildah does and, according to #9111, what was done before,
Also add a test to prevent future regressions.
Fixes: #9111
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
Cleanup and pass proper bindings. Remove cli options from
podman-remote push. Cleanup manifest push.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixup the bindings and the handling of the --external --por and --sort
flags.
The --storage option was renamed --external, make sure we use
external up and down the stack.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Docker has, for unclear reasons, three separate fields in their
Create Container struct in which volumes can be placed. Right now
we support two of those - Binds and Mounts, which (roughly)
correspond to `-v` and `--mount` respectively. Unfortunately, we
did not support the third, `Volumes`, which is used for anonymous
named volumes created by `-v` (e.g. `-v /test`). It seems that
volumes listed here are *not* included in the remaining two from
my investigation, so it should be safe to just append them into
our handling of the `Binds` (`-v`) field.
Fixes#8649
Signed-off-by: Matthew Heon <mheon@redhat.com>
The --default-mounts-file path was not being handled in
podman build. This will enable it to use for testing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when using the compatibility api to create containers, now reflect the
use of k8s-file as json-file so that clients, which are
unaware of k8s-file, can work. specifically, if the container is using
k8s-file as the log driver, we change the log type in container
inspection to json-file. These terms are used interchangably in other
locations in libpod/podman.
this fixes log messages in compose as well.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
I found several problems with container remove
podman-remote rm --all
Was not handled
podman-remote rm --ignore
Was not handled
Return better errors when attempting to remove an --external container.
Currently we return the container does not exists, as opposed to container
is an external container that is being used.
This patch also consolidates the tunnel code to use the same code for
removing the container, as the local API, removing duplication of code
and potential problems.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This function is now used for the port and rename command.
Rename it to AutocompleteContainerOneArg.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When doing a podman images, manifests lists look just like images, so
it is logical that users would assume that they can just podman push them
to a registry. The problem is we throw out weird errors when this happens
and users need to somehow figure out this is a manifest list rather then
an image, and frankly the user will not understand the difference.
This PR will make podman push just do the right thing, by failing over and
attempting to push the manifest if it fails to push the image.
Fix up handling of manifest push
Protocol should bring back a digest string, which can either be
printed or stored in a file.
We should not reimplement the manifest push setup code in the tunnel
code but take advantage of the api path, to make sure remote and local
work the same way.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Basic theory: We remove the container, but *only from the DB*.
We leave it in c/storage, we leave the lock allocated, we leave
it running (if it is). Then we create an identical container with
an altered name, and add that back to the database. Theoretically
we now have a renamed container.
The advantage of this approach is that it doesn't just apply to
rename - we can use this to make *any* configuration change to a
container that does not alter its container ID.
Potential problems are numerous. This process is *THOROUGHLY*
non-atomic at present - if you `kill -9` Podman mid-rename things
will be in a bad place, for example. Also, we can't rename
containers that can't be removed normally - IE, containers with
dependencies (pod infra containers, for example).
The largest potential improvement will be to move the majority of
the work into the DB, with a `RecreateContainer()` method - that
will add atomicity, and let us remove the container without
worrying about depencies and similar issues.
Potential problems: long-running processes that edit the DB and
may have an older version of the configuration around. Most
notable example is `podman run --rm` - the removal command needed
to be manually edited to avoid this one. This begins to get at
the heart of me not wanting to do this in the first place...
This provides CLI and API implementations for frontend, but no
tunnel implementation. It will be added in a future release (just
held back for time now - we need this in 3.0 and are running low
on time).
This is honestly kind of horrifying, but I think it will work.
Signed-off-by: Matthew Heon <mheon@redhat.com>
when using the bindings to *only* make a connection, the binary was
rough 28MB. This PR reduces it down to 11. There is more work to do
but it will come in a secondary PR.
Signed-off-by: baude <bbaude@redhat.com>
Although storage is more human-readable when expressed in SI units,
IEC/JEDEC (Bytes) units are more pertinent for memory-related values
(and match the format of the --memory* command-line options).
(To prevent possible compatibility issues, the default SI display is
left unchanged)
See https://github.com/containers/podman/issues/8945
Signed-off-by: Stuart Shelton <stuart@shelton.me>
Docker does not support this, and it is confusing what to do if
the image has more then one tag. We are dropping support for this
in podman 3.0
Fixes: https://github.com/containers/podman/issues/7387
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
`staticcheck` is a golang code analysis tool. https://staticcheck.io/
This commit fixes a lot of problems found in our code. Common problems are:
- unnecessary use of fmt.Sprintf
- duplicated imports with different names
- unnecessary check that a key exists before a delete call
There are still a lot of reported problems in the test files but I have
not looked at those.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This PR takes the settings from containers.conf and uses
them. This works on the podman local but does not fix the
issue for podman remote or for APIv2. We need a way
to specify optionalbooleans when creating containers.
Fixes: https://github.com/containers/podman/issues/8843
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In 2.2.x, we moved `play kube` to use the Start() API for pods,
which reported errors in a different way (all containers are
started in parallel, and then results reported as a block). The
migration attempted to preserve compatibility by returning only
one error, but that's not really a viable option as it can
obscure the real reason that a pod is failing. Further, the code
was not correctly handling the API's errors - Pod Start() will,
on any container error, return a map of container ID to error
populated for all container errors *and* return ErrPodPartialFail
for overall error - the existing code did not handle the partial
failure error and thus would never return container errors.
Refactor the `play kube` API to include a set of errors for
containers in each pod, so we can return all errors that occurred
to the frontend and print them for the user, and correct the
backend code so container errors are actually forwarded.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Adding another check in the `podman search --list-tags --format json` test case.
Replacing an anonymous struct by \`listEntryTag\` struct.
Signed-off-by: Alexandre Fourcat <afourcat@gmail.com>
`podman ps --format {{.Networks}}` will show all connected networks for
this container. For `pod ps` it will show the infra container networks.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Allow to filter on the network name or full id.
For pod ps it will filter on the infra container networks.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently if server is not connected, we return an error message that
is confusing users on Mac and Windows boxes. The hope here is to make
it a little easier to discover that a Podman service is required.
This message is similar to what Docker puts out so people might under
stand it better.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When migrating a container with associated volumes, the content of
these volumes should be made available on the destination machine.
This patch enables container checkpoint/restore with named volumes
by including the content of volumes in checkpoint file. On restore,
volumes associated with container are created and their content is
restored.
The --ignore-volumes option is introduced to disable this feature.
Example:
# podman container checkpoint --export checkpoint.tar.gz <container>
The content of all volumes associated with the container are included
in `checkpoint.tar.gz`
# podman container checkpoint --export checkpoint.tar.gz --ignore-volumes <container>
The content of volumes is not included in `checkpoint.tar.gz`. This is
useful, for example, when the checkpoint/restore is performed on the
same machine.
# podman container restore --import checkpoint.tar.gz
The associated volumes will be created and their content will be
restored. Podman will exit with an error if volumes with the same
name already exist on the system or the content of volumes is not
included in checkpoint.tar.gz
# podman container restore --ignore-volumes --import checkpoint.tar.gz
Volumes associated with container must already exist. Podman will not
create them or restore their content.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
This change adds code to report the reclaimed space after a prune.
Reclaimed space from volumes, images, and containers is recorded
during the prune call in a PruneReport struct. These structs are
collected into a slice during a system prune and processed afterwards
to calculate the total reclaimed space.
Closes#8658
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Per the conversation on pull/8724 I am consolidating filter logic
and helper functions under the pkg/domain/filters dir.
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
A opened file object of a logfile gets lost because the variable
`logfile` is redefined in a `if` block. This fix stops redefining
the variable.
Signed-off-by: Hironori Shiina <Hironori.Shiina@fujitsu.com>
This change was missed in pull/8689. Now that volume pruneing supports
filters system pruneing can pass its filters down to the volume
pruneing. Additionally this change adds tests for the following components
* podman system prune subcommand with `--volumes` & `--filter` options
* apiv2 api tests for `/system/` and `/libpod/system` endpoints
Relates to #8453, #8672
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Implement `podman-remote cp` and break out the logic from the previously
added `pkg/copy` into it's basic building blocks and move them up into
the `ContainerEngine` interface and `cmd/podman`.
The `--pause` and `--extract` flags are now deprecated and turned into
nops.
Note that this commit is vendoring a non-release version of Buildah to
pull in updates to the copier package.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently the service is attempting to prompt on shortname expansion if you run
with a terminal. This change will cause the service to default to no terminal
and not prompt.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently we hard code TMPDIR environment variable to /var/tmp
if it is not set in the Environment. This causes TMPDIR environment
variable to be ignored if set in containers.conf.
This change now uses the host environment TMPDIR, followed by
containers.conf and then hard codes TMPDIR, if it was not set.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This change adds support for the `--filter` / `?filters` arguments on
the `podman volume prune` subcommand.
* Adds ParseFilterArgumentsIntoFilters helper for consistent
Filter string slice handling
* Adds `--filter` support to podman volume prune cli
* Adds `?filters...` support to podman volume prune api
* Updates apiv2 / e2e tests
Closes#8672
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
podman image sign handles muti-arch images.
--all option to create signature for each manifest from the image manifest list.
Signed-off-by: Qi Wang <qiwan@redhat.com>
do not check whether the specified ID is valid in the user namespace.
crun handles this case[1], so the check in Podman prevents to get to
the OCI runtime at all.
$ podman run --user 10:0 --uidmap 0:0:1 --rm -ti fedora:33 sh -c 'id; cat /proc/self/uid_map'
uid=10(10) gid=0(root) groups=0(root),65534(nobody)
10 0 1
[1] https://github.com/containers/crun/pull/556
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Move all public key handling into one AuthMethod. Prioritize ssh-agent
keys over identity files.
* Cache server connection when tunneling, saves one RoundTrip on ssh
handshake
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Make the ContainerLogsOptions support two io.Writers,
one for stdout and the other for stderr. The logline already
includes the information to which Writer it has to be written.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Also document the allowable filters in podman system prune, podman image prune
and podman container prune.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
There exists a unit test to ensure that shell completion functions are
defined. However there was no check about the quality of the provided
shell completions. Lets change that.
The idea is to create a general test that makes sure we are suggesting
containers,pods,images... for the correct commands. This works by
reading the command use line and checking for each arg if we provide
the correct suggestions for this arg.
It includes the following tests:
- flag suggestions if [options] is set
- container, pod, image, network, volume, registry completion
- path completion for the appropriate arg KEYWORDS (`PATH`,`CONTEXT`,etc.)
- no completion if there are no args
- completion for more than one arg if it ends with `...]`
The test does not cover completion values for flags and not every arg KEYWORD
is supported. This is still a huge improvement and covers most use cases.
This test spotted several inconsistencies between the completion and the
command use line. All of them have been adjusted to make the test pass.
The biggest advantage is that the completions always match the latest
command changes. So if someone changes the arguments for a command this
ensures that the completions must be adjusted.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently the --layers flag set by the user is ignored, and only the BUILDAH_LAYERS
environment variable being set is observed.
Fixes: https://github.com/containers/podman/issues/8643
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the systempaths=unconfined option to --security-opt
to match the docker options for unmasking all the paths
that are masked by default.
Add the mask and unmask options to the podman create doc.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
chenkang
wuhua.ck
Nalin Dahyabhai
zhangguanzhang
OpenShift Merge Robot
Eduardo Vega
Anders F Björklund
Paul Holzinger
Matthew Heon
Daniel J Walsh
baude
Jhon Honce
Ashley Cui
Giuseppe Scrivano
Jakub Guzik
Valentin Rothberg
Pablo Greco
Parker Van Roy
Matej Vasek
bitstrings
Achilleas Tzenetopoulos
Matthew Heon
Stuart Shelton
Alexandre Fourcat
unknown
Radostin Stoyanov
Baron Lenardson
Hironori Shiina
Josh Soref
Qi Wang
Urvashi Mohnani
Kevin Wiesmueller