Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Before this, for some special Podman commands (system reset,
system migrate, system renumber), Podman would create a first
Libpod runtime to do initialization and flag parsing, then stop
that runtime and create an entirely new runtime to perform the
actual task. This is an artifact of the pre-Podman 2.0 days, when
there was almost no indirection between Libpod and the CLI, and
we only used one runtime because we didn't need a second runtime
for flag parsing and basic init.
This system was clunky, and apparently, very buggy. When we
migrated to SQLite, some logic was introduced where we'd select a
different database location based on whether or not Libpod's
StaticDir was manually set - which differed between the first
invocation of Libpod and the second. So we'd get a different
database for some commands (like `system reset`) and they would
not be able to see existing containers, meaning they would not
function properly.
The immediate cause is obviously the SQLite behavior, but I'm
certain there's a lot more baggage hiding behind this multiple
Libpod runtime logic, so let's just refactor it out. It doesn't
make sense, and complicates the code. Instead, make Reset,
Renumber, and Migrate methods of the libpod Runtime. For Reset
and Renumber, we can shut the runtime down afterwards to achieve
the desired effect (no valid runtime after). Then pipe all of
them through the ContainerEngine so cmd/podman can access them.
As part of this, remove the SystemEngine part of pkg/domain. This
was supposed to encompass these "special" commands, but every
command in SystemEngine is actually a ContainerEngine command.
Reset, Renumber, Migrate - they all need a full Libpod and access
to all containers. There's no point to a separate engine if it
just wraps Libpod in the exact same way as ContainerEngine. This
consolidation saves us a bit more code and complexity.
Signed-off-by: Matt Heon <mheon@redhat.com>
It looks like we had some logic for this from #10789 but it does
not appear to have ever worked; we can't pull external containers
out of the DB, so the ContainerRm call failed unconditionally.
Instead, just handle them in Libpod when we're removing images.
We're removing every image, so setting Force when removing images
should get rid of all external containers. It's a little later in
the process than the current (nonfunctional) solution is but I
can't think of a reason why that would be bad.
[NO NEW TESTS NEEDED] We do not currently test `system reset`.
We should probably reevaluate that at some point this year.
Fixes https://issues.redhat.com/browse/RHEL-21261
Signed-off-by: Matt Heon <mheon@redhat.com>
system reset it says it will delete containers, images, networks, etc...
However it will also delete the graphRoot and runRoot directories.
Normally this is not an issue, however in same cases these directories
were set to the users home directory or some other important system
directory.
As first step simply show the directories that are configured and thus
will be deleted by reset. As future step we could implement some
safeguard will will not delete some known important directories however
I tried to keep it simple for now.
[NO NEW TESTS NEEDED]
see #18349 and #18295
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Just like buildkit buildah must allow cleaning the buildcache and cache generated on host by --mount=type=cache just like buildkit's prune command.
See: https://github.com/moby/buildkit#cache
Signed-off-by: Aditya R <arajan@redhat.com>
Firstly, reset is now managed by the runtime itself as a part of
initialization. This ensures that it can be used even with
runtimes that would otherwise fail to be created - most notably,
when the user has changed a core path
(runroot/root/tmpdir/staticdir).
Secondly, we now attempt a best-effort removal even if the store
completely fails to be configured.
Third, we now hold the alive lock for the entire reset operation.
This ensures that no other Podman process can start while we are
running a system reset, and removes any possibility of a race
where a user tries to create containers or pull images while we
are trying to perform a reset.
[NO NEW TESTS NEEDED] we do not test reset last I checked.
Fixes#9075
Signed-off-by: Matthew Heon <mheon@redhat.com>
podman system reset did not clean up machines fully, leaving some config
files, and breaking machines. Now it removes all machines files fully.
Signed-off-by: Ashley Cui <acui@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The linter ensures a common code style.
- use switch/case instead of else if
- use if instead of switch/case for single case statement
- add space between comment and text
- detect the use of defer with os.Exit()
- use short form var += "..." instead of var = var + "..."
- detect problems with append()
```
newSlice := append(orgSlice, val)
```
This could lead to nasty bugs because the orgSlice will be changed in
place if it has enough capacity too hold the new elements. Thus we
newSlice might not be a copy.
Of course most of the changes are just cosmetic and do not cause any
logic errors but I think it is a good idea to enforce a common style.
This should help maintainability.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
[NO TESTS NEEDED]
This commit cleans up two issues:
* Most commands support all EngineModes so default to that. Let
outlayers declare their intent.
* Use cobra.Annotations to set supported EngineMode. This simplies
instantiating commands as there is now one method to communicate a
commands requirements rather than two.
* Combined aliased commands into one file
* Fixed aliased commands where Args field did not match
* Updated examples in README.md for writing commands
* Remove redundant flag DisableFlagsInUseLine in cobra.Command
initialization.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Stop over wrapping API Calls
The API calls will return an appropriate error, and this wrapping
just makes the error message look like it is stuttering and a
big mess.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow automatic generation for shell completion scripts
with the internal cobra functions (requires v1.0.0+).
This should replace the handwritten completion scripts
and even adds support for fish. With this approach it is
less likley that completions and code are out of sync.
We can now create the scripts with
- podman completion bash
- podman completion zsh
- podman completion fish
To test the completion run:
source <(podman completion bash)
The same works for podman-remote and podman --remote and
it will complete your remote containers/images with
the correct endpoints values from --url/--connection.
The completion logic is written in go and provided by the
cobra library. The completion functions lives in
`cmd/podman/completion/completion.go`.
The unit test at cmd/podman/shell_completion_test.go checks
if each command and flag has an autocompletion function set.
This prevents that commands and flags have no shell completion set.
This commit does not replace the current autocompletion scripts.
Closes#6440
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Want to have man pages match commands, since we have lots of printed
man pages with using Options, we will change the command line to use
Options in --help.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
add system df, info, load, renumber, and migrate
Refactor for specialized libpod engines
add the ability to prune images, volumes, containers, and pods
Signed-off-by: baude <bbaude@redhat.com>
Matt Heon
Oleksandr Redko
Paul Holzinger
Carlo Teubner
Aditya R
Barnabé BALP
Ashley Cui
Valentin Rothberg
Valentin Rothberg
Daniel J Walsh
flouthoc
Jhon Honce
Paul Holzinger
Sujil02
baude