when users create a new network and the dnsname plugin can be found by
podman, we will enable container name resolution on the new network.
there is an option to opt *out* as well.
tests cannot be added until we solve the packaging portion of the
dnsname plugin.
Signed-off-by: baude <bbaude@redhat.com>
This is a horrible hack to work around issues with Fedora 31, but
other distros might need it to, so we'll move it upstream.
I do not recommend this functionality for general use, and the
manpages and other documentation will reflect this. But for some
upgrade cases, it will be the only thing that allows for a
working system.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when using the remote client, users may need to specify a non-standard
port for ssh connections. we can do so on the command line and within
the remote-client configuration file.
Fixes: #3987
Signed-off-by: baude <bbaude@redhat.com>
when removing a podman network, we need to make sure we delete the
network interface if one was ever created (by running a container).
also, when removing networks, we check if any containers are using the
network. if they are, we error out unless the user provides a 'force'
option which will remove the containers in question.
Signed-off-by: baude <bbaude@redhat.com>
Support generating systemd unit files for a pod. Podman generates one
unit file for the pod including the PID file for the infra container's
conmon process and one unit file for each container (excluding the infra
container).
Note that this change implies refactorings in the `pkg/systemdgen` API.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add the digestfile option to the push command so the digest can
be stored away in a file when requested by the user. Also have added
a debug statement to show the completion of the push.
Emulates Buildah's https://github.com/containers/buildah/pull/1799/files
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
adding podman network and the subcommands inspect, list, and rm. the
inspect subcommand displays the raw cni network configuration. the list
subcommand displays a summary of the cni networks ala ps. and the rm
subcommand removes a cni network.
Signed-off-by: baude <bbaude@redhat.com>
If a container is restored multiple times from an exported checkpoint
with the help of '--import --name', the restore will fail if during
'podman run' a static container IP was set with '--ip'. The user can
tell the restore process to ignore the static IP with
'--ignore-static-ip'.
Signed-off-by: Adrian Reber <areber@redhat.com>
This includes:
Implement exec -i and fix some typos in description of -i docs
pass failed runtime status to caller
Add resize handling for a terminal connection
Customize exec systemd-cgroup slice
fix healthcheck
fix top
add --detach-keys
Implement podman-remote exec (jhonce)
* Cleanup some orphaned code (jhonce)
adapt remote exec for conmon exec (pehunt)
Fix healthcheck and exec to match docs
Introduce two new OCIRuntime errors to more comprehensively describe situations in which the runtime can error
Use these different errors in branching for exit code in healthcheck and exec
Set conmon to use new api version
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Peter Hunt <pehunt@redhat.com>
The newly added functionality to include the container's root
file-system changes into the checkpoint archive can now be explicitly
disabled. Either during checkpoint or during restore.
If a container changes a lot of files during its runtime it might be
more effective to migrated the root file-system changes in some other
way and to not needlessly increase the size of the checkpoint archive.
If a checkpoint archive does not contain the root file-system changes
information it will automatically be skipped. If the root file-system
changes are part of the checkpoint archive it is also possible to tell
Podman to ignore these changes.
Signed-off-by: Adrian Reber <areber@redhat.com>
The man page of 'podman diff' claims that the diff sub-command knows
about --latest, -l. This adds support, as described in the man-page, to
the diff sub-command for --latest, -l.
Signed-off-by: Adrian Reber <areber@redhat.com>
This flag switches to removing containers directly from c/storage
and is mostly used to remove orphan containers.
It's a superior solution to our former one, which attempted
removal from storage under certain circumstances and could, under
some conditions, not trigger.
Also contains the beginning of support for storage in `ps` but
wiring that in is going to be a much bigger pain.
Fixes#3329.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This allows writing output directly to a file, instead of STDOUT.
Makes things easier for some scripting tasks. Like the unit tests
for 'play kube'.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The option to restore a container from an external checkpoint archive
(podman container restore -i /tmp/checkpoint.tar.gz) restores a
container with the same name and same ID as id had before checkpointing.
This commit adds the option '--name,-n' to 'podman container restore'.
With this option the restored container gets the name specified after
'--name,-n' and a new ID. This way it is possible to restore one
container multiple times.
If a container is restored with a new name Podman will not try to
request the same IP address for the container as it had during
checkpointing. This implicitly assumes that if a container is restored
from a checkpoint archive with a different name, that it will be
restored multiple times and restoring a container multiple times with
the same IP address will fail as each IP address can only be used once.
Signed-off-by: Adrian Reber <areber@redhat.com>
This commit adds an option to the checkpoint command to export a
checkpoint into a tar.gz file as well as importing a checkpoint tar.gz
file during restore. With all checkpoint artifacts in one file it is
possible to easily transfer a checkpoint and thus enabling container
migration in Podman. With the following steps it is possible to migrate
a running container from one system (source) to another (destination).
Source system:
* podman container checkpoint -l -e /tmp/checkpoint.tar.gz
* scp /tmp/checkpoint.tar.gz destination:/tmp
Destination system:
* podman pull 'container-image-as-on-source-system'
* podman container restore -i /tmp/checkpoint.tar.gz
The exported tar.gz file contains the checkpoint image as created by
CRIU and a few additional JSON files describing the state of the
checkpointed container.
Now the container is running on the destination system with the same
state just as during checkpointing. If the container is kept running
on the source system with the checkpoint flag '-R', the result will be
that the same container is running on two different hosts.
Signed-off-by: Adrian Reber <areber@redhat.com>
add the ability for the podman remote client to use a configuration file
which describes its connections. users can now define a connection the
configuration and then call it by name like:
podman-remote -c connection1
and the destination and user will be derived from the configuration
file. if no -c is provided, we look for a connection in the
configuration file designated as 'default'. If the configuration file
has only one connection, it will be deemed the 'default'.
Signed-off-by: baude <bbaude@redhat.com>
allow the user to define a remote host and remote username for their
remote podman sessions. this is then feed to the varlink "bridge" as
the ssh credentials and endpoint.
Signed-off-by: baude <bbaude@redhat.com>
the podman generate systemd command will generate a systemd unit file
based on the attributes of an existing container and user inputs. the
command outputs the unit file to stdout for the user to copy or
redirect. it is enabled for the remote client as well.
users can set a restart policy as well as define a stop timeout
override for the container.
Signed-off-by: baude <bbaude@redhat.com>
As part of this, rework the number of workers used by various
Podman tasks to match original behavior - need an explicit
fallthrough in the switch statement for that block to work as
expected.
Also, trivial change to Podman cleanup to work on initialized
containers - we need to reset to a different state after cleaning
up the OCI runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
podman system prune would leave pods be, and not prune them if they were stopped.
Fix this by adding a `podman pod prune` command that prunes stopped pods similarly to containers.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
In cases where the remote client culls options to a command, we need to
be sure that the lookup for that flag does not result in a nil pointer.
To do so, we add a Remote attribute to the podman struct and then cli
helper funcs are now aware they are remote.
Signed-off-by: baude <bbaude@redhat.com>
The 'docker commit' will never include a container's volumes when
committing, without an explicit request through '--change'.
Podman, however, defaulted to including user volumes as image
volumes.
Make this behavior depend on a new flag, '--include-volumes',
and make the default behavior match Docker.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
allows users to "watch" the output of podman ps on a set interval in
seconds. in watch mode, the screen is cleared between intervals as well.
podman -ps -w1 watches on 1 second intervals
Signed-off-by: baude <bbaude@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Add the ability to manually run a container's healthcheck command.
This is only the first phase of implementing the healthcheck.
Subsequent pull requests will deal with the exposing the results and
history of healthchecks as well as the scheduling.
Signed-off-by: baude <bbaude@redhat.com>
In cases where a user issues the podman container runlabel
command and the image is not local, we now default to pulling
the image automatically to mimic the atomic cli behavior.
Fixes: BZ #1677905
Signed-off-by: baude <bbaude@redhat.com>
This command allows for renumbering Podman locks after an upgrade
to Podman with SHM locks from a 1.0 or earlier branch, or after
the number of locks was changed.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
iFix builtin volumes to work with podman volume
Currently builtin volumes are not recored in podman volumes when
they are created automatically. This patch fixes this.
Remove container volumes when requested
Currently the --volume option on podman remove does nothing.
This will implement the changes needed to remove the volumes
if the user requests it.
When removing a volume make sure that no container uses the volume.
Signed-off-by: Daniel J Walsh dwalsh@redhat.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
baude
Matthew Heon
Anders F Björklund
Daniel J Walsh
OpenShift Merge Robot
Valentin Rothberg
TomSweeneyRedHat
Chen Zhiwei
Qi Wang
Adrian Reber
Peter Hunt
Giuseppe Scrivano
Jhon Honce
Kunal Kushwaha
Sebastian Jug