Refactor the entities' stats API to simplify using it and reduce the
risk of running into concurrency issues at the call sites. Further
simplify the stats code by de-spaghetti-ing the logic and reducing
duplicate code.
`ContainerStats` now returns a data channel and an error. If the error
is nil, callers can read from the channel.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Do not perform a container clean up for containers configured for
auto-removal (e.g., via `podman run --rm`). There is a small race
window with the other process performing the removal where a clean up
during podman-stop may fail since the container has already been removed
and cleaned up. As the removing process will clean up the container,
we don't have to do it during podman-stop.
Fixes: #7384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `context.Context` to the log APIs to allow for cancelling
streaming (e.g., via `podman logs -f`). This fixes issues for
the remote API where some go routines of the server will continue
writing and produce nothing but heat and waste CPU cycles.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We weren't actually halting the goroutine that sent events, so it
would continue sending even when the channel closed (the most
notable cause being early hangup - e.g. Control-c on a curl
session). Use a context to cancel the events goroutine and stop
sending events.
Fixes#6805
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes#6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is the other command that benefits greatly from being run in
parallel, due to the potential 15-second timeout for containers
that ignore SIGTERM.
While we're at it, also clean up how stop timeout is set. This
needs to be an optional parameter, so that the value set when the
container is created with `--stop-timeout` will be respected.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This code will run container operations in parallel, up to a
given maximum number of threads. Currently, it has only been
enabled for local `podman rm` as a proof of concept.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The cleanup process was already running and ensuring that mounts
and networking configuration was cleaned up on container stop,
but this was async from the actual `podman stop` command which
breaks some expectations - the container is still mounted at the
end of `podman stop` and will be cleaned up soon, but not
immediately. Fortunately, it's a trivial change to resolve this.
Fixes#5747
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We also need to rework container/image inspect to be separate,
but that can happen in another PR.
Fixes#6472
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Fix a race in `podman container stats` by waiting for the client to
consume the data in the channel. This requires a `sync.WaitGroup` (or
semaphore) in the client and to also close the channel the backend.
Fixes: #6405
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The cleanup command creation logic is made public as part of this
and wired such that we can call it both within SpecGen (to make
container exit commands) and from the ABI detached exec handler.
Exit commands are presently only used for detached exec, but
theoretically could be turned on for all exec sessions if we
wanted (I'm declining to do this because of potential overhead).
I also forgot to copy the exit command from the exec config into
the ExecOptions struct used by the OCI runtime, so it was not
being added.
There are also two significant bugfixes for exec in here. One is
for updating the status of running exec sessions - this was
always failing as I had coded it to remove the exit file *before*
reading it, instead of after (oops). The second was that removing
a running exec session would always fail because I inverted the
check to see if it was running.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We need to be able to use cleanup processes to remove exec
sessions as part of detached exec. This PR adds that ability. A
new flag is added to `podman container cleanup`, `--exec`, to
specify an exec session to be cleaned up.
As part of this, ensure that `ExecCleanup` can clean up exec
sessions that were running, but have since exited. This ensures
that we can come back to an exec session that was running but has
since stopped, and clean it up.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a new ContainerEngine method for creating a detached exec
session, and wire in the frontend code to do this. As part of
this, move Streams out of ExecOptions to the function signature
in an effort to share the struct between both methods.
Fixes#5884
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Adds podman system prune for v2.
Refactoring for code reuse from pods containers images and volume prune.
Adds and enables testcases to support the added feature.
Signed-off-by: Sujil02 <sushah@redhat.com>
this is necessary as we expect "podman start $ID_NAME" to print the
same arguments the user passed in instead of the full ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This should complete Podmanv2's support for volume-related flags.
Most code was sourced from the old pkg/spec implementation with
modifications to account for the split between frontend flags
(volume, mount, tmpfs) and the backend flags implemented here.
Also enables tests for podman run with volumes
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
While this commit was initially meant to fix#5847, it has turned into a
bigger refactoring which I did not manage to break into smaller pieces:
* Fix#5847 by refactoring the image-removal logic.
* Make the api handler for image-removal use the ABI code. This way,
both (i.e., ABI and Tunnel) end up using the same code. Achieving
this code share required to move some code around to prevent circular
dependencies.
* Everything in pkg/api (excluding pkg/api/types) must now only be
accessed from code using `ABISupport`.
* Avoid imports from entities on handlers to prevent circular
dependencies.
* Move `podman system service` logic into `cmd` to prevent circular
dependencies - it depends on pkg/api.
* Also remove the build header from infra/abi files. It will otherwise
confuse swagger and other tools; errors we cannot fix as go doesn't
expose a build-tag env variable.
Fixes: #5847
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Enable running podman V2 rootless
* Fixed cobra.PersistentPreRunE usage in all the commands
* Leveraged cobra.PersistentPreRunE/cobra.PersistentPostRunE to manage:
* rootless
* trace (--trace)
* profiling (--cpu-profile)
* initializing the registry copies of Image/Container engines
* Help and Usage templates autoset for all sub-commands
Signed-off-by: Jhon Honce <jhonce@redhat.com>
this is second phase of removing unneeded bloat in the remote client. this is important to be able to reduce the client size as well as possible native compilation for windows/mac.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Adds ability to prune containers for v2.
Adds client side prompt with force flag and filters options to prune.
Signed-off-by: Sujil02 <sushah@redhat.com>
add the ability to clean up after a container has attempted to run. this is also important for podman run --rm --rmi.
also included are fixes and tweaks to various code bits to correct regressions on output.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Valentin Rothberg