the way machine was written was very adjunct and as such is in dire need
of refactoring to better structures and structure methods where
appropriate. the weekest part is specifically around all the files that
machine requires and how some are just dynamically built on the fly.
this pr defines a new machinefile type which allows us to work with the
file and also takes into account the use of symlinks which are going to
be needed on macos due to its relatively short file length restriction.
also, added unit tests for new methods as well as anywhere else I saw a
need.
Signed-off-by: Brent Baude <bbaude@redhat.com>
When podman gets an error it prints out "Error: " before
printing the error string. If the error message starts with
error, we end up with
Error: error ...
This PR Removes all of these stutters.
logrus.Error() also prints out that this is an error, so no need for the
error stutter.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Flag is actually named `rootful` however documented as `root`, fix the
documented example as actual flag.
Both `podman machine init` and `podman machine set` uses flag `rootfull`
[NO TESTS NEEDED]
[NO NEW TESTS NEEDED]
Signed-off-by: Aditya R <arajan@redhat.com>
The PlayKube and PlayKubeDown commands accepted a "path" argument to a YAML file
to play. This requires the caller to write the YAML to a file path. The downside
of this is apparent in the HTTP handlers which have to use a temporary file on
disk to store the YAML file.
The file is opened & used as the body of the HTTP request. It's possible to
instead pass a io.Reader and use a fully in-memory request body.
Add backwards-compatible changes to bindings to allow passing either a filepath
or a io.Reader body.
Refactor the podman bindings to use a io.Reader instead of a filepath.
Simplify the HTTP handlers for PlayKube by removing the now unneeded tempfile.
[NO NEW TESTS NEEDED]
Signed-off-by: Christian Stewart <christian@paral.in>
Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
Still an unknown number remains but I am running out of patience.
Adding dots is not the best use of my time.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The calculate the percentage we need floating point numbers. The current
code however casted the result of reclaimable/size to an int first.
Casting to an int in go will just discard the decimal points, thus the
result was either 0 or 1 so if multiplied by 100 it would show up as 0%
or 100%.
To fix this we have to multiply by 100 first before casting the result
to an int. Also add a check for div by zero which results in NaN and use
math.Round() to correctly round a number.
Ref #13516
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* supports Go 1.18
* disable a number of new linters
* fix minor stylecheck issues
[NO NEW TESTS NEEDED]
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Docker Compose v2.0 passes mount specifications in two different
places: Volumes (just the destination) and Mounts (full info
provided - source, destination, etc). This was causing Podman to
refuse to create containers, as the destination was used twice.
Deduplicate between Mounts and Volumes, preferring volumes, to
resolve this.
Fixes#11822
Signed-off-by: Matthew Heon <mheon@redhat.com>
When podman is build without git commit information it will print a
empty newline instead. This is undesirable and a regression introduced
in commit 7d22cc88ef.
To test build podman with `go build -mod=vendor -o bin/podman ./cmd/podman`
and check the output of bin/podman version with and without this commit.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Allow users to add annotions in the podman play kube command.
This PR Also fixes the fact that annotations in the pod spec were
not being passed down to containers.
Fixes: https://github.com/containers/podman/issues/12968
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The permissions on disk were wrong since we were not converting to
octal.
Fixes: https://github.com/containers/podman/issues/13108
[NO NEW TESTS NEEDED] Since we don't currently test using the docker
client
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If you want to remove a running machine, you can now pass the --force/-f
to podman machine rm and the machine will be stopped and removed without
confirmations.
Fixes: #13448
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
This option was requested so that users could specify alternate
locations to find context directories for each image build. It
requites the --build option to be set.
Partion Fix: https://github.com/containers/podman/issues/12485
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Add a extra `See 'podman command --help'` to the error output.
With this patch you now get:
```
$ podman run -h
Error: flag needs an argument: 'h' in -h
See 'podman run --help'
```
Fixes#13082Fixes#13002
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
I do not know why this code was added but it is wrong. We should never
use a plugin dir as config dir. Also this will fail for netavark. The
correct default will be set in c/common so podman should not touch it.
[NO NEW TESTS NEEDED]
Ref #13183
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
podman system prune should also remove all networks. When we want to
users to migrate to the new network stack we recommend to run podman
system reset. However this did not remove networks and if there were
still networks around we would continue to use cni since this was
considered an old system.
There is one exception for the default network. It should not be removed
since this could cause other issues when it no longer exists. The
network backend detection logic ignores the default network so this is
fine.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Alpine does not seem to use search correctly when there are multiple
search domains on the same line. It only uses the first with the advent.
When podman runs within a separate network we are appending on
dns.podman as a search, if you add a search domain, then this causes the
local search on network to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
[NO NEW TESTS NEEDED] image scp was reading the localhost syntax too loosely causing some errors with domains or hosts containing the word
localhost. Fixed that and added a few lines to make sure the pure localhost connections do not touch sshd
resolves#13021
Signed-off-by: cdoern <cdoern@redhat.com>
podman network create --subnet, --gateway and --ip-range can now be
specified multiple times to join the network to more than one subnet.
This is very useful if you want to use a dual stack network and assign a
fixed ipv4 and ipv6 subnet. The order of the options is important here,
the first --gateway/--ip-range will be assigned to the first subnet and
so on.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Bumps Buildah to v1.24.0 and adopts the new values for pull:
true, false, never, and always. The pull-never and pull-always options
for the build command are still usable, but they have been removed from
the man page documentation with this change.
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
machinectl does not propogate error messages and adds extra lines in the output, exec.Cmd is able to clear the env besides PATH and TERM,
and use the given UID and GID to execute the command properly.
machinectl is still used to create a user session. Ubuntu support is limited by this.
Signed-off-by: cdoern <cdoern@redhat.com>
When we run rootless buildah needs to have IsolationOCIRootless set
otherwise it will run code which cannot be used as rootless user.
Podman should use the buildah default if possible and change it to
rootless mode if needed.
[NO NEW TESTS NEEDED] Should be covered by existing tests once we have
podman-remote rootless tests.
Fixes#12989
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Before this PR, the podman --help command shows the defaults
as runc and overlay even if the storage.conf and containers.conf
files do not match. This PR changes them to show the actual defaults
and in the case of storage driver, does not show the default at all.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Heuristic to initialize TunnelMode/remote podman:
- Podman built with remote tag
- Podman running on darwin or windows GOOS
- CONTAINER_HOST or CONTAINER_CONNECTION set in environment
- --remote flag given on command line
- From containers.conf, Engine.Remote == true and GOOS == linux
Otherwise, podman will run in ABIMode/linked against libpod library.
Fixes#12866
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This commit includes:
* Handlers for generate systemd unit
with manually defined dependencies such as:
Wants=, After= and Requires=
* The new unit and e2e tests for checking generated systemd units
for container and pod with custom dependencies
* Documented descriptions for custom dependencies options
Signed-off-by: Eugene (Evgenii) Shubin <esendjer@gmail.com>
Since this option will also be used for netavark we should rename it to
something more generic. It is important that --cni-config-dir still
works otherwise we could break existing container cleanup commands.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Improve our compatibility with Docker by better handling the
state strings that we print in `podman ps`. Docker capitalizes
all states in `ps` (we do not) - fix this in our PS code. Also,
stop normalizing ContainerStateConfigured to the "Created" state,
and instead make it always be Created, with the existing Created
state becoming Initialized.
I didn't rename the actual states because I'm somewhat reticent
to make such a large change a day before we leave for break. It's
somewhat confusing that ContainerStateConfigured now returns
Created, but internally and externally we're still consistent.
[NO NEW TESTS NEEDED] existing tests should catch anything that
broke.
I also consider this a breaking change. I will flag appropriately
on Github.
Fixes RHBZ#2010432 and RHBZ#2032561
Signed-off-by: Matthew Heon <mheon@redhat.com>
This commit unifies the method of filters parsing in cmd.
It removes also the function redundancy.
[NO NEW TESTS NEEDED]
Signed-off-by: Jakub Guzik <jguzik@redhat.com>
* Update method/function signatures use the manifest list name and
images associated with the operation explicitly, in general
func f(ctx context.Context, manifestListName string,
ImageNames []string, options *fOptions)
* Leverage gorilla/mux Subrouters to support API v3.x and v4.x for
manifests
* Make manifest API endpoints more RESTful
* Add PUT /manifest/{id} to update existing manifests
* Add manifests.Annotate to go bindings, uncommented unit test
* Add DELETE /manifest/{Id} to remove existing manifest list, use
PUT /manifest/{id} to remove images from a list
* Deprecated POST /manifest/{id}/add and /manifest/{id}/remove, use
PUT /manifest/{id} instead
* Corrected swagger godoc and updated to cover API changes
* Update podman manifest commands to use registry.Context()
* Expose utils.GetVar() to obtain query parameters by name
* Unexpose server.registerSwaggerHandlers, not sure why this was ever
exposed.
* Refactored code to use http.Header instead of map[string]string when
operating on HTTP headers.
* Add API-Version header support in bindings to allow calling explicate
versions of the API. Header is _NOT_ forwarded to the API service.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman build always finds the abs path but was never using it for the containerfile path. This
was causing the remote client to be given a relative path that does not exist. Switch to evaluating and using absolute paths only.
resolves#12841
Signed-off-by: cdoern <cdoern@redhat.com>
Support removing the entire pod when --depend is used on an infra
container. --all now implies --depend to properly support removing all
containers and not error out when hitting infra containers.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
added support for pod wide sysctls. The sysctls supported are the same as the continer run controls.
These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl
resolves#12747
Signed-off-by: cdoern <cdoern@redhat.com>
Relay --quiet to save & load commands, in both Rootless
and Rootful transfer functions.
Also, a little cleanup:
- remove unuseful SOURCE/DEST printfs
- refactor duplication in execMachine()
- fix Debug("Executing") statements to include the actual
command they're executing
[NO NEW TESTS NEEDED] : Tests are being slowly implemented in #12797
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Signed-off-by: Ed Santiago <santiago@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are seeing some issues with users not understanding which VM they are
starting, and if the VM takes a long time to start, they do not know
where to look.
Moving the name to before the VM starts at least allows them to realize
they are starting the wrong VM.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
Brent Baude