podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
Alpine does not seem to use search correctly when there are multiple
search domains on the same line. It only uses the first with the advent.
When podman runs within a separate network we are appending on
dns.podman as a search, if you add a search domain, then this causes the
local search on network to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for pod wide sysctls. The sysctls supported are the same as the continer run controls.
These controls are only valid if the proper namespaces are shared within the pod, otherwise only the infra ctr gets the sysctl
resolves#12747
Signed-off-by: cdoern <cdoern@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the --ipv6 flag to podman create/run and pod create. We support the
--network name:ip6=<ip> syntax now but for docker compat we should also
support the --ip6 flag.
Note that there is no validation if the ip is actually a v6 or v4 address
because the backend does not care either.
Fixes#7511
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We have to get the network ID from the network backend. With the
netavark backend we no longer use the sha from the name as ID.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
To make testing easier we can overwrite the network backend with the
global `--network-backend` option.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure that the value is only set if specified on the CLI. c/image
already defaults to true but if set in the system context, we'd skip
settings in the registries.conf.
Fixes: #11933
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Kernel memory option has been depracated in runtime-spec, It is
believed that it will not work properly on certain kernels. runc
ignores it.
This PR removes documentation of the flag and also prints a warning if
a user uses it.
[NO NEW TESTS NEEDED]
Helps Fix: https://github.com/containers/podman/issues/12045
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a volumes from container. this flag just required movement of the volumes-from flag declaration
out of the !IsInfra block, and minor modificaions to container_create.go
Signed-off-by: cdoern <cdoern@redhat.com>
Users can set --pids-limit to -1 now to set unlimited
pids limit for a container - this matches the convention.
[NO TESTS NEEDED]
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
added the option for the user to specify a rate, in bytes, at which they would like to be able
to read from the device being added to the pod. This is the first in a line of pod device options.
WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name
Signed-off-by: cdoern <cdoern@redhat.com>
it allows to pass the current std streams down to the container.
conmon support: https://github.com/containers/conmon/pull/289
[NO TESTS NEEDED] it needs a new conmon.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The shell completion should only suggest arguments that work. Using a
image without tag does not work in many cases. Having both the version
with and without tag also forces users to press one key more because
tab completion will always stop at the colon.
Fixes#11673
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
MapOptions take the pod and container create options, assigning matching values from infra
back to the pod for the Libpod API. This function, unlike the previous one, does not require any
manual additions when new options are added since it uses the structs JSON tags, this is a more modular approach.
Signed-off-by: cdoern <cdoern@redhat.com>
Add support for the ipvlan cni plugin. This allows us to create,
inspect and list ipvlan networks correctly.
Fixes#10478
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make use of the new network interface in libpod.
This commit contains several breaking changes:
- podman network create only outputs the new network name and not file
path.
- podman network ls shows the network driver instead of the cni version
and plugins.
- podman network inspect outputs the new network struct and not the cni
conflist.
- The bindings and libpod api endpoints have been changed to use the new
network structure.
The container network status is stored in a new field in the state. The
status should be received with the new `c.getNetworkStatus`. This will
migrate the old status to the new format. Therefore old containers should
contine to work correctly in all cases even when network connect/
disconnect is used.
New features:
- podman network reload keeps the ip and mac for more than one network.
- podman container restore keeps the ip and mac for more than one
network.
- The network create compat endpoint can now use more than one ipam
config.
The man pages and the swagger doc are updated to reflect the latest
changes.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves#10379
Signed-off-by: cdoern <cdoern@redhat.com>
Filtering is missing in both compat API and libpod API, while docker
has filtering functinality. This commit enables filtering option using
name and id in both libpod and http API.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
In commit d81021ed26 I introduced shell completion for the `--format`
flag. This is a very nice way to complete go template field names.
However it did not work correct for anonymous fields. In this case the
child fields can be accessed directly from the parent.
For example:
```
type Anonymous struct {
Field1 string
Field2 string
...
}
type MyType struct {
Anonymous
}
var s = MyType{}
```
Now if you want to access a field from the Anonymous struct you can just
do `s.Field1`. The same is allowed for go templates, using `{{.Field1}}`
should work. This commit adds this functionality, if the field is anonymous
read the child field names recursively and add them to the suggestions.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
cdoern
Morten Linderud
Daniel J Walsh
Valentin Rothberg
OpenShift Merge Robot
Paul Holzinger
Brent Baude
Jakub Guzik
Giuseppe Scrivano
Matej Vasek
Nalin Dahyabhai
Urvashi Mohnani
Jakub Guzik
Jhon Honce