podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
[NO NEW TESTS NEEDED]
Support better compatibility output for podman pods commands
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Leverage new report.Formatter allowing better compatibility from
podman command output.
Follow on PR's will cover containers, etc.
See #10974
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Podman logs was defined twice, once for container logs and once for pod
logs. This causes problems with the shell completion. Also podman --help
showed this command twice.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
'--memory-swappiness=0' used to work. This patch fixes the regression
issue, which was caused by the change of infra container creation
process.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Fix a bug where pods would be created with the hard-coded default infra
image instead of the custom one from containers.conf. Add a simple
regression test.
Fixes: #12245
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we create a pod we have to parse the network mode form the config
file. This is a regression in commit d28e85741f.
Fixes#12207
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add --time flag to podman container rm
Add --time flag to podman pod rm
Add --time flag to podman volume rm
Add --time flag to podman network rm
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added the option for the user to specify a rate, in bytes, at which they would like to be able
to read from the device being added to the pod. This is the first in a line of pod device options.
WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name
Signed-off-by: cdoern <cdoern@redhat.com>
MapOptions take the pod and container create options, assigning matching values from infra
back to the pod for the Libpod API. This function, unlike the previous one, does not require any
manual additions when new options are added since it uses the structs JSON tags, this is a more modular approach.
Signed-off-by: cdoern <cdoern@redhat.com>
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves#10379
Signed-off-by: cdoern <cdoern@redhat.com>
Flush should be called after the last call to Write to ensure that any data buffered in the Writer is written to output.
Any incomplete escape sequence at the end is considered complete for formatting purposes.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Following PR adds support for `kubectl` like `pod logs` to podman.
Usage `podman pod logs <podIDorName` gives a stream of logs for all
the containers within the pod with **containername** as a field.
Just like **`kubectl`** also supports `podman pod logs -c ctrIDorName podIDorName`
to limit the log stream to any of the specificied container which belongs to pod.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
In commit d81021ed26 I introduced shell completion for the `--format`
flag. This is a very nice way to complete go template field names.
However it did not work correct for anonymous fields. In this case the
child fields can be accessed directly from the parent.
For example:
```
type Anonymous struct {
Field1 string
Field2 string
...
}
type MyType struct {
Anonymous
}
var s = MyType{}
```
Now if you want to access a field from the Anonymous struct you can just
do `s.Field1`. The same is allowed for go templates, using `{{.Field1}}`
should work. This commit adds this functionality, if the field is anonymous
read the child field names recursively and add them to the suggestions.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
InfraContainer should go through the same creation process as regular containers. This change was from the cmd level
down, involving new container CLI opts and specgen creating functions. What now happens is that both container and pod
cli options are populated in cmd and used to create a podSpecgen and a containerSpecgen. The process then goes as follows
FillOutSpecGen (infra) -> MapSpec (podOpts -> infraOpts) -> PodCreate -> MakePod -> createPodOptions -> NewPod -> CompleteSpec (infra) -> MakeContainer -> NewContainer -> newContainer -> AddInfra (to pod state)
Signed-off-by: cdoern <cdoern@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
When optional information such as container IDs and names in pods, the
headers are not displayed. This fix restored the headers.
Documentation of this subcommand is also updated.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Refactor podman commands that have drifted from using
c/common report pkg. Report pkg is needed to implement
go template functions.
Removed obsolete code from podman which exists in c/common.
Latest template library added default newlines and method to
remove them. Incorporated needed changes in c/common PR below.
Depends on https://github.com/containers/common/pull/624
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1855983
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Using the gvproxy application on the host, we can now port forward from
the machine vm on the host. It requires that 'gvproxy' be installed in
an executable location. gvproxy can be found in the
containers/gvisor-tap-vsock github repo.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO TESTS NEEDED]
This commit cleans up two issues:
* Most commands support all EngineModes so default to that. Let
outlayers declare their intent.
* Use cobra.Annotations to set supported EngineMode. This simplies
instantiating commands as there is now one method to communicate a
commands requirements rather than two.
* Combined aliased commands into one file
* Fixed aliased commands where Args field did not match
* Updated examples in README.md for writing commands
* Remove redundant flag DisableFlagsInUseLine in cobra.Command
initialization.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The --format flags accepts go template strings. I use this often but I
consistently forget the field names. This commit adds a way to provide
shell completion for the --format flag. It works by automatically
receiving the field names with the reflect package from the given
struct. This requires almost no maintenance since this ensures that we
always use the correct field names. This also works for nested structs.
```
$ podman ps --format "{{.P"
{{.Pid}} {{.PIDNS}} {{.Pod}} {{.PodName}} {{.Ports}}
```
NOTE: This only works when you use quotes otherwise the shell does not
provide completions. Also this does not work for fish at the moment.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently we have only podman images list --noheading.
This PR Adds this option to volumes, containers, pods, networks,
machines, and secrets.
Fixes: https://github.com/containers/podman/issues/10065
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The `--network` flag is parsed differently for `podman pod create`.
This causes confusion and problems for users. The extra parsing
logic ignored unsupported network options such as `none`,
`container:...` and `ns:...` and instead interpreted them as cni
network names.
Tests are added to ensure the correct errors are shown.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Although storage is more human-readable when expressed in SI units,
IEC/JEDEC (Bytes) units are more pertinent for memory-related values
(and match the format of the --memory* command-line options).
(To prevent possible compatibility issues, the default SI display is
left unchanged)
See https://github.com/containers/podman/issues/8945
Signed-off-by: Stuart Shelton <stuart@shelton.me>
`staticcheck` is a golang code analysis tool. https://staticcheck.io/
This commit fixes a lot of problems found in our code. Common problems are:
- unnecessary use of fmt.Sprintf
- duplicated imports with different names
- unnecessary check that a key exists before a delete call
There are still a lot of reported problems in the test files but I have
not looked at those.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
`podman ps --format {{.Networks}}` will show all connected networks for
this container. For `pod ps` it will show the infra container networks.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
There exists a unit test to ensure that shell completion functions are
defined. However there was no check about the quality of the provided
shell completions. Lets change that.
The idea is to create a general test that makes sure we are suggesting
containers,pods,images... for the correct commands. This works by
reading the command use line and checking for each arg if we provide
the correct suggestions for this arg.
It includes the following tests:
- flag suggestions if [options] is set
- container, pod, image, network, volume, registry completion
- path completion for the appropriate arg KEYWORDS (`PATH`,`CONTEXT`,etc.)
- no completion if there are no args
- completion for more than one arg if it ends with `...]`
The test does not cover completion values for flags and not every arg KEYWORD
is supported. This is still a huge improvement and covers most use cases.
This test spotted several inconsistencies between the completion and the
command use line. All of them have been adjusted to make the test pass.
The biggest advantage is that the completions always match the latest
command changes. So if someone changes the arguments for a command this
ensures that the completions must be adjusted.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
As described in issue #8507 this commit contains a breaking
change which is not wanted in v2.2.
We can discuss later if we want this in 3.0 or not.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The word "name" appears to have been missed in the help output for:
podman pod create --help
This patch fixes that
Signed-off-by: Benjamin Porter <FreedomBen@users.noreply.github.com>
We allow a container to be connected to several cni networks
but only if they are listed comma sperated. This is not intuitive
for users especially since the flag parsing allows multiple string
flags but only would take the last value. see: spf13/pflag#72
Also get rid of the extra parsing logic for pods. The invalid options
are already handled by `pkg/specgen`.
A test is added to prevent a future regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Xueyuan Chen
cdoern
OpenShift Merge Robot
Daniel J Walsh
Valentin Rothberg
Paul Holzinger
Jhon Honce
Hironori Shiina
Aditya Rajan
José Guilherme Vanz
cdoern
Brent Baude
Paul Holzinger
Stuart Shelton
Luap99
Benjamin Porter