podman needs to use the environment settings in containers.conf
when setting up the containers.
Also host environment variables should be relative to server side
not the client.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
it allows to manually tweak the configuration for cgroup v2.
we will expose some of the options in future as single
options (e.g. the new memory knobs), but for now add the more generic
--cgroup-conf mechanism for maximum control on the cgroup
configuration.
OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040
Requires: https://github.com/containers/crun/pull/459
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We had a customer incident where they ran out of space on /run.
If you don't specify size, it will be still limited to 50% or memory
available in the cgroup the container is running in. If the cgroup is
unlimited then the /run will be limited to 50% of the total memory
on the system.
Also /run is mounted on the host as exec, so no reason for us to mount
it noexec.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
it allows to customize the options passed down to the OCI runtime for
setting up the /proc mount.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This matches Docker behavior, and seems to make sense - the CMD
may have been specific to the original entrypoint and probably
does not make sense if it was changed.
While we're in here, greatly simplify the logic for populating
the SpecGen's Command. We create the full command when making the
OCI spec, so the client should not be doing any more than setting
it to the Command the user passed in, and completely ignoring
ENTRYPOINT.
Fixes#7115
Signed-off-by: Matthew Heon <mheon@redhat.com>
Allow to create a devpts mount.
This is useful for containers that bind mount /dev/ from the host but
at the same time want to create a terminal.
It can be used as:
podman run -v /dev:/dev --mount type=devpts,target=/dev/pts ...
Closes: https://github.com/containers/podman/issues/6804
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Docker and CNI have very different ideas of what 0.0.0.0 means.
Docker takes it to be 0.0.0.0/0 - that is, bind to every IPv4
address on the host. CNI (and, thus, root Podman) take it to mean
the literal IP 0.0.0.0. Instead, CNI interprets the empty string
("") as "bind to all IPs".
We could ask CNI to change, but given this is established
behavior, that's unlikely. Instead, let's just catch 0.0.0.0 and
turn it into "" when we parse ports.
Fixes#7014
Signed-off-by: Matthew Heon <mheon@redhat.com>
For some reason we were overwriting memory when handling both
--pid=host and --ipc=host. Simplified the code to handle this
correctly, and add test to make sure it does not happen again.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently you can not apply an ApparmorProfile if you specify
--privileged. This patch will allow both to be specified
simultaniosly.
By default Apparmor should be disabled if the user
specifies --privileged, but if the user specifies --security apparmor:PROFILE,
with --privileged, we should do both.
Added e2e run_apparmor_test.go
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
People who use docker scripts with Podman see failures
if they use disable-content-trust flag. This flag already
existed for podman build, adding it to pull/push/create/run.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently we are sending over pids-limits from the user even if they
never modified the defaults. The pids limit should be set at the server
side unless modified by the user.
This issue has led to failures on systems that were running with cgroups V1.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
I didn't believe that this was actually legal, but it looks like
it is. And, unlike our previous understanding (host port being
empty means just use container port), empty host port actually
carries the same meaning as `--expose` + `--publish-all` (that
is, assign a random host port to the given container port). This
requires a significant rework of our port handling code to handle
this new case. I don't foresee this being commonly used, so I
optimized having a fixed port number as fast path, which this
random assignment code running after the main port handling code
only if necessary.
Fixes#6806
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When running under systemd there is no need to create yet another
cgroup for the container.
With conmon-delegated the current cgroup will be split in two sub
cgroups:
- supervisor
- container
The supervisor cgroup will hold conmon and the podman process, while
the container cgroup is used by the OCI runtime (using the cgroupfs
backend).
Closes: https://github.com/containers/libpod/issues/6400
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
If the user runs a container like
podman run --security-opt seccomp=unconfined --security-opt label=type:spc_t --security-opt label=level:s0 ...
Podman inspect was only showing the second option
This change will show
"SecurityOpt": [
"label=type:spc_t,label=level:s0:c60",
"seccomp=unconfined"
],
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When going through the output of `podman inspect` to try and
identify another issue, I noticed that Podman 2.0 was setting
StopSignal to 0 on containers by default. After chasing it
through the command line and SpecGen, I determined that we were
actually not setting a default in Libpod, which is strange
because I swear we used to do that. I re-added the disappeared
default and now all is well again.
Also, while I was looking for the bug in SpecGen, I found a bunch
of TODOs that have already been done. Eliminate the comments for
these.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This was lost during the Podman 2.0 migration. Turns out to be a
very easy fix, fortunately - we want to use the environment var
if not explicitly overridden.
Fixes#6705
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a `--replace` flag to the `container {create,run}` commands.
If another container with the same name already exists, it will
be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a container may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Allow containers to join an existing pod via the `--pod-id-file` which
is already supported by a number of `podman-pod` subcommands. Also add
tests to make sure it's working and to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
OpenShift Merge Robot
Daniel J Walsh
Giuseppe Scrivano
Matthew Heon
Ashley Cui
Qi Wang
Ralf Haferkamp
Matthew Heon
Joseph Gooch
Valentin Rothberg