Store the full command plus arguments of the process the container has
been created with. Expose this data as a `Config.CreateCommand` field
in the container-inspect data as well.
This information can be useful for debugging, as we can find out which
command has created the container, and, if being created via the Podman
CLI, we know exactly with which flags the container has been created
with.
The immediate motivation for this change is to use this information for
`podman-generate-systemd` to generate systemd-service files that allow
for creating new containers (in contrast to only starting existing
ones).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Unless explicitely overridden, check if the image's OS and architecture
and throw an errors in case of a mismatch.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We have the annotations SandboxID, let's use them. This also allows kata containers to be created in pods and share a VM with the infra container. Note: as of now, this sharing only works if the pod has an infra container
Signed-off-by: Peter Hunt <pehunt@redhat.com>
As it stands, createconfig is a huge struct. This works fine when the only caller is when we create a container with a fully created config. However, if we wish to share code for security and namespace configuration, a single large struct becomes unweildy, as well as difficult to configure with the single createConfigToOCISpec function.
This PR breaks up namespace and security configuration into their own structs, with the eventual goal of allowing the namespace/security fields to be configured by the pod create cli, and allow the infra container to share this with the pod's containers.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Use GetDefaultAuthFile() from buildah.
For podman command(except login), if authfile does not exist returns error.
close#4328
Signed-off-by: Qi Wang <qiwan@redhat.com>
Currently podman play kube is not using the system default seccomp.json file.
This PR will use the default or override location for podman play.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add --override-arch and --override-os as hidden flags, in line with the
global flag names that skopeo uses, so that we can test behavior around
manifest lists without having to conditionalize more of it by arch.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
it enforces the systemd mode also when the command name doesn't match
/usr/sbin/init or systemd.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
"init" is a quite common name for the command executed in a container
image and Podman ends up using the systemd mode also when not
required.
Be stricter on enabling the systemd mode and not enable it
automatically when the basename is "init" but expect the full path
"/usr/sbin/init".
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
CRI-O defaults to 1024 for the maximum pids in a container. Podman
should have a similar limit. Once we have a containers.conf, we can
set the limit in this file, and have it easily customizable.
Currently the documentation says that -1 sets pids-limit=max, but -1 fails.
This patch allows -1, but also indicates that 0 also sets the max pids limit.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
This is mostly used with Systemd, which really wants to manage
CGroups itself when managing containers via unit file.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Requirement from https://github.com/containers/libpod/issues/3575#issuecomment-512238393
Added --pull for podman create and pull to match the newly added flag in docker CLI.
`missing`: default value, podman will pull the image if it does not exist in the local.
`always`: podman will always pull the image.
`never`: podman will never pull the image.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Add flag `--authfile` to create and run so Podman can read authfile path from not only environemnt variable REGISTRY_AUTH_FILE but also CLI
Signed-off-by: Qi Wang <qiwan@redhat.com>
Previously, we use CreateConfig's Command to populate container
Command (which is used as CMD for Inspect and Commit).
Unfortunately, CreateConfig's Command is the container's full
command, including a prepend of Entrypoint - so we duplicate
Entrypoint for images that include it.
Maintain a separate UserCommand in CreateConfig that does not
include the entrypoint, and use that instead.
Fixes#3708
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add an error when there are not enough input arguments for remote
create. Addresses comments in #3656
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
allow a container to run in a new cgroup namespace.
When running in a new cgroup namespace, the current cgroup appears to
be the root, so that there is no way for the container to access
cgroups outside of its own subtree.
By default it uses --cgroup=host to keep the previous behavior.
To create a new namespace, --cgroup=private must be provided.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When we first began writing Podman, we ran into a major issue
when implementing Inspect. Libpod deliberately does not tie its
internal data structures to Docker, and stores most information
about containers encoded within the OCI spec. However, Podman
must present a CLI compatible with Docker, which means it must
expose all the information in 'docker inspect' - most of which is
not contained in the OCI spec or libpod's Config struct.
Our solution at the time was the create artifact. We JSON'd the
complete CreateConfig (a parsed form of the CLI arguments to
'podman run') and stored it with the container, restoring it when
we needed to run commands that required the extra info.
Over the past month, I've been looking more at Inspect, and
refactored large portions of it into Libpod - generating them
from what we know about the OCI config and libpod's (now much
expanded, versus previously) container configuration. This path
comes close to completing the process, moving the last part of
inspect into libpod and removing the need for the create
artifact.
This improves libpod's compatability with non-Podman containers.
We no longer require an arbitrarily-formatted JSON blob to be
present to run inspect.
Fixes: #3500
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If the image was built with "HEALTHCHECK NONE" then we should create a
container without healthcheck configuration. Otherwise executing the
healthcheck on the container will return "unhealthy" instead of the
correct error message that the container doesn't have a healthcheck.
We also ignore the healthcheck configuration if the command list is
empty or the command string is empty.
Fixes#3525
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
If the image doesn't provide any options, e.g. interval, timeout, etc.,
then apply the Docker defaults when creating the container. Otherwise
the defaults will be left 0 and podman doesn't schedule the healtcheck
service & timer for the container or incorrectly reports unhealthy state
when the check is executed.
Fixes#3525
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Fix Docker CLI compatibility issue: the "--healthcheck-command" option
value should not be split but instead be passed as single string to
"CMD-SHELL", i.e. "/bin/sh -c <opt>".
On the other hand implement the same extension as is already available
for "--entrypoint", i.e. allow the option value to be a JSON array of
strings. This will make life easier for tools like podman-compose.
Updated "--healthcheck-command" option values in tests accordingly.
Continuation of #3455 & #3507
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
This flag passes the host environment into the container. The basic idea is to
leak all environment variables from the host into the container.
Environment variables from the image, and passed in via --env and --env-file
will override the host environment.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With StringSlice, we're seeing individual options added and
parsed separately, so `tmpfs:nosuid,nodev` turns into three tmpfs
mounts passed into pkg/sec (tmpfs:, nosuid, nodev). Swap to
StringArray to tell cobra this can't be split on commas.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Four of the healthcheck tests were completely broken. They
were written with the option '--healthcheck-cmd' which is
not an option (it should be '--healthcheck-command', with
'command' as a full word). The tests were merely checking
exit code, not error message, so of course they failed.
I have fixed the command line and added checks for the
expected diagnostic.
(Side note: do not write tests that check exit code but
nothing else. This should not need to be said).
One of the four tests was invalid: --healthcheck-interval 0.5s.
Per Brent:
initially i was going to restrict sub one-second intervals
That test has been removed. It would probably be a good idea
for a future PR to add some validation such as preventing
negative values, but that's left as an exercise for later.
Also: grammar fix in an error message.
Caught by my ginkgo log greasemonkey script, which
highlights 'Error' messages and grabbed my attention.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add a journald reader that translates the journald entry to a k8s-file formatted line, to be added as a log line
Note: --follow with journald hasn't been implemented. It's going to be a larger undertaking that can wait.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
it creates a namespace where the current UID:GID on the host is mapped
to the same UID:GID in the container.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Valentin Rothberg
OpenShift Merge Robot
Dmitry Smirnov
Peter Hunt
Jakub Filak
Qi Wang
Daniel J Walsh
Nalin Dahyabhai
Giuseppe Scrivano
Miloslav Trmač
Matthew Heon
Jhon Honce
TomSweeneyRedHat
baude
Stefan Becker
Ed Santiago