selinux-policy-34.9-1.fc34 breaks a behavior we've relied on
since (at least) January 2020:
- Revert "Add permission open to files_read_inherited_tmp_files()
interface"
That's probably the correct thing to do, but it breaks our
existing tests. Solution: add ':Z' where needed.
Tested on Ed's laptop, which has the offending selinux-policy
as of 2021-05-31. Tests pass root and rootless. (I mention
this because tests will obviously pass in CI, which has a
much older selinux-policy).
Also: add a 'podman rmi' for cleanup in one test, to avoid
noise in test logs.
Fixes: #10522
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently if a user runs an image with a user specified or
exposed ports with podman play kube, the fields are ignored.
Fixed: https://github.com/containers/podman/issues/9609
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fix a race in journald driver. Following the logs implies streaming
until the container is dead. Streaming happened in one goroutine,
waiting for the container to exit/die and signaling that event happened
in another goroutine.
The nature of having two goroutines running simultaneously is pretty
much the core of the race condition. When the streaming goroutines
received the signal that the container has exitted, the routine may not
have read and written all of the container's logs.
Fix this race by reading both, the logs and the events, of the container
and stop streaming when the died/exited event has been read. The died
event is guaranteed to be after all logs in the journal which guarantees
not only consistencty but also a deterministic behavior.
Note that the journald log driver now requires the journald event
backend to be set.
Fixes: #10323
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure all containers exit after start
There is a race condition in that container could still be running when
we attempt to remove them.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
ErrOCIRuntimeNotFound error is misleading. Try to make it more
understandable to the user that the OCI Runtime IE crun or runc is not
missing, but the command they attempted to run within the container is
missing.
[NO TESTS NEEDED] Regular tests should handle this.
Fixes: https://github.com/containers/podman/issues/10432
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixes: https://github.com/containers/podman/issues/10393
Currently if a user specifies a --root flag to override the location of
the container storage, we still enforce the storage-opts from
storage.conf. This causes issues with people trying to intereact with
the additional stores feature, and then forces them to use the obscure
--storage-opt="" option. I belive this should be the default and we
already do this when the user specifies the --storage-driver option.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When attempting to copy files into and out of running containers
within the host pidnamespace, the code was attempting to join the
host pidns again, and getting an error. This was causing the podman
cp command to fail. Since we are already in the host pid namespace,
we should not be attempting to join. This PR adds a check to see if
the container is in NOT host pid namespace, and only then attempts to
join.
Fixes: https://github.com/containers/podman/issues/9985
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This change adds the entry `host.containers.internal` to the `/etc/hosts`
file within a new containers filesystem. The ip address is determined by
the containers networking configuration and points to the gateway address
for the containers networking namespace.
Closes#5651
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Allow podman network reload to be run as rootless user. While it is
unlikely that the iptable rules are flushed inside the rootless cni
namespace, it could still happen. Also fix podman network reload --all
to ignore errors when a container does not have the bridge network mode,
e.g. slirp4netns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Allow users to specify options on the volume mount path.
This will trigger relabels of user specifies :z,:Z
Also will handle User Relabels if the user specifies :U
Fixes: https://github.com/containers/podman/issues/9371
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We should create the /etc/mtab->/proc/mountinfo link
so that mount command will work within the container.
Docker does this by default.
Fixes: https://github.com/containers/podman/issues/10263
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The initial version of libimage changed the order of layers which has
now been restored to remain backwards compatible.
Further changes:
* Fix a bug in the journald logging which requires to strip trailing
new lines from the message. The system tests did not pass due to
empty new lines. Triggered by changing the default logger to
journald in containers/common.
* Fix another bug in the journald logging which embedded the container
ID inside the message rather than the specifid field. That surfaced
in a preceeding whitespace of each log line which broke the system
tests.
* Alter the system tests to make sure that the k8s-file and the
journald logging drivers are executed.
* A number of e2e tests have been changed to force the k8s-file driver
to make them pass when running inside a root container.
* Increase the timeout in a kill test which seems to take longer now.
Reasons are unknown. Tests passed earlier and no signal-related
changes happend. It may be CI VM flake since some system tests but
other flaked.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The added test in 30544f225e is flaking. Podman inspect is always
working so we have to check the pid instead.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When a container is automatically restarted due its restart policy and
the container used the slirp4netns netmode, the slirp4netns process
died. This caused the container to lose network connectivity.
To fix this we have to start a new slirp4netns process.
Fixes#8047
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The following bugs seem to be fixed:
* #6510 (e2e tests) - podman rmi gives "layer not known"
* #9915 (buildah-bud tests) - podman build --arch
* #10248 - spurious warning from first-ever invocation
of rootless podman
Signed-off-by: Ed Santiago <santiago@redhat.com>
The with --new generated systemd unit loses the environment variables
when the create command only contains the key without the value. Since
podman tries to lookup those values from the environment the unit can
fail.
This commits ensures that we will add the environment variables to the
unit file when this is the case. The container environment variables are
looked up in the container spec.
Fixes#10101
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Revert : https://github.com/containers/podman/pull/9895
Turns out that if Docker is in --selinux-enabeled, it still relabels if
the user tells the system to, even if running a --privileged container
or if the selinux separation is disabled --security-opt label=disable.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Reason: to catch errors before they surface in RHEL.
One of the Ubuntus is specially crafted to run with cgroups v1
and runc. Although this isn't quite the same as RHEL, it's as
close as we can come in our CI environment, and I suspect it
would have caught #10234 (a regression).
Sorry, team.
Also: play kube limits test: skip on all rootless, not just
rootless+fedora. There was a complicated and unnecessary
check in there for Fedora.
Also: workaround for bug #10248, a spurious error message on
the first invocation of rootless podman on Ubuntu.Old
Signed-off-by: Ed Santiago <santiago@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Some CI systems set $OCI_RUNTIME as a way to override the
default crun. Integration (e2e) tests honor this, but system
tests were not aware of the convention; this means we haven't
been testing system tests with runc, which means RHEL gating
tests are now failing.
The proper solution would be to edit containers.conf on CI
systems. Sorry, that would involve too much CI-VM work.
Instead, this PR detects $OCI_RUNTIME and creates a dummy
containers.conf file using that runtime.
Add: various skips for tests that don't work with runc.
Refactor: add a helper function so we don't need to do
the complicated 'podman info blah blah .OCIRuntime.blah'
thing in many places.
BUG: we leave a tmp file behind on exit.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The RHEL multi-arch team informed me that we were missing
aarch64; add it, using the new name (arm64v8).
(This is from last week, so the image date tag does not
match today's date. I was waiting for confirmation that
things were working).
Signed-off-by: Ed Santiago <santiago@redhat.com>
changed struct to policyMapper
change "image" to "registry" in multiple locations
Updated documentation with registry alias & autoupdate local
Added relevant test
Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
Basically, add 'podman wait' before 'podman rm'. See if this
fixes gating tests run on ppc64le (possibly very very slow hosts)
Signed-off-by: Ed Santiago <santiago@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The source ip for the rootlesskit port forwarder was hardcoded to the
standard slirp4netns ip. This is incorrect since users can change the
subnet used by slirp4netns with `--network slirp4netns:cidr=10.5.0.0/24`.
The container interface ip is always the .100 in the subnet. Only when
the rootlesskit port forwarder child ip matches the container interface
ip the port forwarding will work.
Fixes#9828
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Currently we have rootless users who want to leak their groups access
into containers, but this group access is only able to be pushed in by
a hard to find OCI Runtime annotation. This PR makes this option a lot
more visable and hides the complexity within the podman client.
This option is only really needed for local rootless users. It makes
no sense for remote clients, and probably makes little sense for
rootfull containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Ed Santiago
Daniel J Walsh
Valentin Rothberg
OpenShift Merge Robot
Baron Lenardson
Paul Holzinger
Boaz Shuster
Parker Van Roy