In `podman inspect` output for containers and pods, we include
the command that was used to create the container. This is also
used by `podman generate systemd --new` to generate unit files.
With remote podman, the generated create commands were incorrect
since we sourced directly from os.Args on the server side, which
was guaranteed to be `podman system service` (or some variant
thereof). The solution is to pass the command along in the
Specgen or PodSpecgen, where we can source it from the client's
os.Args.
This will still be VERY iffy for mixed local/remote use (doing a
`podman --remote run ...` on a remote client then a
`podman generate systemd --new` on the server on the same
container will not work, because the `--remote` flag will slip
in) but at the very least the output of `podman inspect` will be
correct. We can look into properly handling `--remote` (parsing
it out would be a little iffy) in a future PR.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If I enter a continer with --userns keep-id, my UID will be present
inside of the container, but most likely my user will not be defined.
This patch will take information about the user and stick it into the
container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
If the user runs a container like
podman run --security-opt seccomp=unconfined --security-opt label=type:spc_t --security-opt label=level:s0 ...
Podman inspect was only showing the second option
This change will show
"SecurityOpt": [
"label=type:spc_t,label=level:s0:c60",
"seccomp=unconfined"
],
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When going through the output of `podman inspect` to try and
identify another issue, I noticed that Podman 2.0 was setting
StopSignal to 0 on containers by default. After chasing it
through the command line and SpecGen, I determined that we were
actually not setting a default in Libpod, which is strange
because I swear we used to do that. I re-added the disappeared
default and now all is well again.
Also, while I was looking for the bug in SpecGen, I found a bunch
of TODOs that have already been done. Eliminate the comments for
these.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Allow containers to join an existing pod via the `--pod-id-file` which
is already supported by a number of `podman-pod` subcommands. Also add
tests to make sure it's working and to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Systemd enablement has to happen on the server side, since we need
check if the image is running systemd.
Also need to make sure user setting the StopSignal is not overriden on the
server side. But if not set and using systemd, we set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --conmon-pidfile was not set in the spec leading to failing systemd
units. Also add a system test to prevent future regressions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
There are three different priorities for applying env variables:
1) environment/config file environment variables
2) image's config
3) user overrides (--env)
The third kind are known to the client, while the default config and image's
config is handled by the backend.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
To try and identify differences between Podman v1.9 and master,
I ran a series of `podman run` commands with various flags
through each, then inspecting the resulting containers and diffed
the inspect JSON between each. This identified a number of issues
which are fixed in this PR.
In order of discovery:
- Podman v2 gave short names for images, where Podman v1 gave the
fully-qualified name. Simple enough fix (get image tags and use
the first one if they're available)
- The --restart flag was not being parsed correctly when a number
of retries was specified. Parsing has been corrected.
- The -m flag was not setting the swap limit (simple fix to set
swap in that case if it's not explicitly set by the user)
- The --cpus flag was completely nonfunctional (wired in its
logic)
Tests have been added for all of these to catch future
regressions.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of this, make a major change to the type we use to
represent port mappings in SpecGen (from using existing OCICNI
structs to using our own custom one). This struct has the
advantage of supporting ranges, massively reducing traffic over
the wire for Podman commands using them (for example, the
`podman run -p 5000-6000` command will now send only one struct
instead of 1000). This struct also allows us to easily validate
which ports are in use, and which are not, which is necessary for
--expose.
Once we have parsed the ports from the new struct, we can produce
an accurate map including all currently requested ports, and use
that to determine what ports need to be exposed (some requested
exposed ports may already be included in a mapping from --publish
and will be ignored) and what open ports on the host we can map
them to.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Combine cobra.Command helper functions into validate package
from registry and common packages
* Introduce ChoiceValue for flags
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This should complete Podmanv2's support for volume-related flags.
Most code was sourced from the old pkg/spec implementation with
modifications to account for the split between frontend flags
(volume, mount, tmpfs) and the backend flags implemented here.
Also enables tests for podman run with volumes
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This enables the --volume, --mount, and --tmpfs flags in
Podmanv2. It does not enable init-related flags, image volumes,
and --volumes-from.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Matthew Heon
Daniel J Walsh
Joseph Gooch
OpenShift Merge Robot
Valentin Rothberg
Ashley Cui
Qi Wang
Giuseppe Scrivano
baude
Jhon Honce