This produces detailed information about the configuration of an
exec session in a format suitable for the new HTTP API.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of the rework of exec sessions, we want to split Create
and Start - and, as a result, we need to keep everything needed
to start exec sessions in the struct, not just the bare minimum
for tracking running ones.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactored current filter pods flow through the shared pod functions
so filter pod functionalities can be shared between api and cmd.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add support to auto-update containers running in systemd units as
generated with `podman generate systemd --new`.
`podman auto-update` looks up containers with a specified
"io.containers.autoupdate" label (i.e., the auto-update policy).
If the label is present and set to "image", Podman reaches out to the
corresponding registry to check if the image has been updated. We
consider an image to be updated if the digest in the local storage is
different than the one of the remote image. If an image must be
updated, Podman pulls it down and restarts the container. Note that the
restarting sequence relies on systemd.
At container-creation time, Podman looks up the "PODMAN_SYSTEMD_UNIT"
environment variables and stores it verbatim in the container's label.
This variable is now set by all systemd units generated by
`podman-generate-systemd` and is set to `%n` (i.e., the name of systemd
unit starting the container). This data is then being used in the
auto-update sequence to instruct systemd (via DBUS) to restart the unit
and hence to restart the container.
Note that this implementation of auto-updates relies on systemd and
requires a fully-qualified image reference to be used to create the
container. This enforcement is necessary to know which image to
actually check and pull. If we used an image ID, we would not know
which image to check/pull anymore.
Fixes: #3575
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Move the dbus-connection code from libpod's healthcheck to pkg/systemd
to allow for sharing the logic. Needed for the auto-updates work.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
make clearer that the warning could also happen because the logger is
set to use systemd.
Closes: https://github.com/containers/libpod/issues/5443
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add endpoints for create, add, remove, inspect, and push. this allows manifests to be managed through the restful interfaces.
also added go-bindings and tests
Signed-off-by: Brent Baude <bbaude@redhat.com>
calculating the image size can be an expensive operation. Avoid doing
it when creating a new container since the size is not needed.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Update the outdated systemd and dbus dependencies which are now provided
as go modules. This will further tighten our dependencies and releases
and pave the way for the upcoming auto-update feature.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This reverts commit d3d97a25e8.
This does not resolve the issues we expected it would, and has
some unexpected side effects with the upcoming exec rework.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This reverts commit 4632b81c81.
We are reverting #5373 as well, which lays the foundation for
this commit, so it has to go as well.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
during container creation, if no network is provided, we need to add a default value so the container can be later started.
use apiv2 container creation for RunTopContainer instead of an exec to the system podman. RunTopContainer now also returns the container id and an error.
added a libpod commit endpoint.
also, changed the use of the connections and bindings slightly to make it more convenient to write tests.
Fixes: 5366
Signed-off-by: Brent Baude <bbaude@redhat.com>
Specifically to get:
https://github.com/containernetworking/cni/pull/735
6f29b0165883b2b52ccd4dcb937162ea4c86927b intercept netplugin std err
But also pulls in some interface name validation and a compatibility
fix for configurations that don't set a CNI version.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Some users have small /var/tmp directories and need to be able to specify a different location
for temporary files, which includes more space.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In some older systems we point the temporary directory to /run/user/1000 which leads podman system reset to clear unrelated files under XDG_RUNTIME_DIR. This patch only removes files created by podman if TmpDir is the same as the XDG_RUNTIME_DIR.
Signed-off-by: Qi Wang <qiwan@redhat.com>
this is a cosmetic change that makes sure podman returns a sane error code when conmon dies underneath it
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Before, we were using -1 as a bogus value in podman to signify something went wrong when reading from a conmon pipe. However, conmon uses negative values to indicate the runtime failed, and return the runtime's exit code.
instead, we should use a bogus value that is actually bogus. Define that value in the define package as MinInt32 (-1<< 31 - 1), which is outside of the range of possible pids (-1 << 31)
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Before, we were getting the exit code from the file, in which we waited an arbitrary amount of time (5 seconds) for the file, and segfaulted if we didn't find it. instead, we should be a bit more certain conmon has sent the exit code. Luckily, it sends the exit code along the sync pipe fd, so we can read it from there
Adapt the ExecContainer interface to pass along a channel to get the pid and exit code from conmon, to be able to read both from the pipe
Signed-off-by: Peter Hunt <pehunt@redhat.com>
This patch allows users to specify the list of capabilities required
to run their container image.
Setting a image/container label "io.containers.capabilities=setuid,setgid"
tells podman that the contained image should work fine with just these two
capabilties, instead of running with the default capabilities, podman will
launch the container with just these capabilties.
If the user or image specified capabilities that are not in the default set,
the container will print an error message and will continue to run with the
default capabilities.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Until now, we've been validating every part of container
configuration through the With... functions that set the options.
This if fine when we are just validating the options to an
individual function, but things get complicated once we need to
validate conflicts between different options. We don't know the
order in which things were passed, so we need the validation on
both of the potential options that can conflict, resulting in
significant code duplication. To solve this, add a validate()
function for containers, and use this to check whether everything
is in a good state.
We can probably move more into this function (there are other
parts of container creation that also do validation of a sort)
but this is a good start to simplifying our options.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Modify the pod inspect bindings to hold current pod status.
Includes test to validate on pod status and added test to check
no or few pods are pruned,if the pods are in exited state.
Signed-off-by: Sujil02 <sushah@redhat.com>
This corrects a regression from Podman 1.4.x where container exec
sessions inherited supplemental groups from the container, iff
the exec session did not specify a user.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
added the ability to wait on a condition (stopped, running, paused...) for a container. if a condition is not provided, wait will default to the stopped condition which uses the original wait code paths. if the condition is stopped, the container exit code will be returned.
also, correct a mux issue we discovered.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add binding tests for volumes: inspect(get), create, remove, prune, and list
implement filters ability for volumes
Signed-off-by: Brent Baude <bbaude@redhat.com>
When inspecting containers, info on CNI networks added to the
container by name (e.g. --net=name1) should be displayed
separately from the configuration of the default network, in a
separate map called Networks.
This patch adds this separation, improving our Docker
compatibility and also adding the ability to see if a container
has more than one IPv4 and IPv6 address and more than one MAC
address.
Fixes#4907
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We can easily tell if we're going to deadlock by comparing lock
IDs before actually taking the lock. Add a few checks for this in
common places where deadlocks might occur.
This does not yet cover pod operations, where detection is more
difficult (and costly) due to the number of locks being involved
being higher than 2.
Also, add some error wrapping on the Podman side, so we can tell
people to use `system renumber` when it occurs.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
OpenShift Merge Robot
Matthew Heon
Giuseppe Scrivano
Sujil02
Valentin Rothberg
Brent Baude
Abhijeet Kasurde
Daniel J Walsh
Dan Williams
Qi Wang
Peter Hunt