Using the ExactArgs(1) function is better because we have less
duplication of the error text and the ValidArgsFunction uses that to
suggest shell completion. The command before this commit would suggest
connection names even if there was already one arg on the cli set.
However because there is the --all option we still must exclude that
first.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Change the warning message at runtime to refer to the man page of podman-compose instead of "the documentation"
Add instructions in the man page on how to disable the warning emitted by podman-compose when using an external compose provider
Signed-off-by: marinmo <bugzilla@marinmo.org>
The events code makes use of two channels, one for the events and one
for the resulting error. Then in the main file we have a loop reading
from both channels that should exit on first error it gets.
However in case the event channel is closed before the error channel
cotains the error it could caused an early exit as it looked like all
events were done. Commit c46884aa93 fixed that somewhat by checking for
an error in the error channel before exiting. This however was still
racy as it added a default case in the select which means the channel
check is non blocking. Thus the error was not yet send into the channel.
To fix this we should make it a blocking read to wait for the error in
the channel. Also the err != nil check can be removed as we either
return err or nil anyway.
And as last step make sure the error channel is closed, that prevents us
from blocking forever in case the main select already processed the nil
error.
Fixes#23165
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The driver is now hardcoded again, and there can only be
one type of mounts at a time (which one changes over time)
Revert "Make it possible to select the volume driver"
This reverts commit 6630e5cf66.
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Close loophole that would allow you to assign more memory than the
system has to a podman machine
Fixes: #18206
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman machine reset now removes and resets machines from all providers availabe on the platform.
On windows, if the user is does not have admin privs, machine will only reset WSL, but will emit a warning that it is unable to remove hyperV machines without elevated privs.
Signed-off-by: Ashley Cui <acui@redhat.com>
When the user specifies a Containerfile or Dockfile with the -f flag in podman build, if the file does not exist, the error should be intuitive to the user.
Fixed: #22940
Signed-off-by: Kevin Cui <bh@bugs.cc>
The pod was set after we checked the namespace and the namespace code
only checked the --pod flag but didn't consider --pod-id-file option.
As such fix the check to first set the pod option on the spec then use
that for the namespace. Also make sure we always use an empty default
otherwise it would be impossible in the backend to know if a user
requested a specific userns or not, i.e. even in case of a set
PODMAN_USERNS env a container should still get the userns from the pod
and not use the var in this case. Therefore unset it from the default
cli value.
There are more issues here around --pod-id-file and cli validation that
does not consider the option as conflicting with --userns like --pod
does but I decided to fix the bug at hand and don't try to fix the
entire mess which most likely would take days.
Fixes#22931
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a user specifies a invalid connection in CONTAINER_CONNECTION then
podman should return a proper error saying so. Currently it ignored the
error and in rootFlags() just exited early with defining any flags. This
caused a panic then when trying to use the flags later.
In order to address this first store the connection error in the
PodmanConfig struct and not abort right away during flag setup. This is
important as the user might have specified a flag with a valid remote
connection. As such we check all flags and only when none were given we
return the connection error.
Also while at it I noticed that the default connection reported via
podman --help was wrong as it only used the old containers.conf field
for it and did not consider the podman-connections.json default.
New regression tests have been added to make sure it behaves correctly.
This fixes the problem reported in the PR #22997.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add a new flag that allows to override the pull options configured in
the storage.conf file.
e.g.: --pull-option="enable_partial_images=false" can be specified to
Podman to disable partial pulls even if enabled.
Leave it as a hidden configuration flag for now since the API itself
is marked as experimental in c/storage.
Currently c/storage doesn't honor the overrides, being fixed with
https://github.com/containers/storage/pull/1966
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is the same as what --squash-all is doing, and we already support
--squash with --layers=true since this is the default.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a `podman system check` that performs consistency checks on local
storage, optionally removing damaged items so that they can be
recreated.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Use the configuration parameters from the newly introduced
PodmanshConfig struct. This allows podmansh to be configured via
configuration files.
Signed-off-by: phoenix <felix.niederwanger@suse.com>
The function that's handing us events will return an error after closing
the channel over which it's sending events, and its caller (in its own
goroutine) will then send that error over another channel.
The logic that started the goroutine is likely to notice that the events
channel is closed before noticing that the error channel has a result
for it to read, so any error that would have been communicated would be
lost.
When we finish reading events, check if the reader returned an error
before telling our caller that there was no error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
The logic here is more complex than I would like, largely due to
the behavior of `podman inspect` for running containers. When a
container is running, `podman inspect` will source as much as
possible from the OCI spec used to run that container, to grab
up-to-date information on things like devices. We don't want to
change this, it's definitely the right behavior, but it does make
updating a running container inconvenient: we have to rewrite the
OCI spec as part of the update to make sure that `podman inspect`
will read the correct resource limits.
Also, make update emit events. Docker does it, we should as well.
Signed-off-by: Matt Heon <mheon@redhat.com>
Docker shows exposed ports as just PORT/PROTO so match that behavior. It
is not clear to me why someone needs that information in ps as "expose"
doesn't effect anything networking related.
Fixes https://issues.redhat.com/browse/RHEL-32154
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we remove with --force we do not return a error if the input does
not exists, however if we get more than on input we must try to remove
all and not just NOP out and not remove anything just because one arg
did not exists.
Also make the code simpler for commands that do have the --ignore option
and just make --force imply --ignore which reduces the ugly error
handling.
Fixes#21529
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Windows is not guaranteed to have the SSH feature installed, so prefer the use
of the built-in ssh client for all operations other than podman machine ssh,
which requires terminal pty logic. This restores previous behavior in 4.x.
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
Follow up to 493179be45 which only fixed the issue on the server despite
me trying to fix it on the client as well, with this change here we
always correctly unset the default on the remote client as the
root/rootless status will be wrong.
This means it is enough for users to either have a new server or client
with the bug fix which should make the update process easier.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
I am really not sure why the caller even should have the option to set
this. We should always use the correct isolation type based on the
privileges the server runs under never the client. podman-remote build
seems to send the default based on its local privs which was wrong as
well. To fix this I also changed the client to send the default if the
isolation flag is not set.
Fixes#22109
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Paul Holzinger
Daniel J Walsh
openshift-merge-bot[bot]
Anders F Björklund
Giuseppe Scrivano
marinmo
Brent Baude
Ashley Cui
Kevin Cui
miyamo2
Nalin Dahyabhai
jkwiatko
phoenix
Shion Tanaka
qianxi0410
Florian Wickert
Evgeni Golov
Matt Heon
lvyaoting
Jason T. Greene