add the ability to create and run containers via the podman-remote
client.
we now create an intermediate layer from the the create/run cli flags.
the intermediate layer can be converted into a createconfig or into a
varlink struct. Once transported, the varlink struct can be converted
back to an intermediate layer and then to a createconfig.
remote terminals are not supported yet.
Signed-off-by: baude <bbaude@redhat.com>
the remote client now can run the diff command to report changes,
modifications, and deletions in an image or container.
Signed-off-by: baude <bbaude@redhat.com>
add the ability for users to specify more than one container at a time
while using podman logs. If more than one container is being displayed,
podman will also prepend a shortened container id of the container on
the log line.
also, enabled the podman-remote logs command during the refactoring of
the above ability.
fixes issue #2219
Signed-off-by: baude <bbaude@redhat.com>
Make the usage messages (and options) different between
podman inspect, podman image inspect, and podman container inspect.
Disable inapplicable options (-l, -s) for podman image inspect
Disable -t (type) when the type is implicit through the subcommand.
Update man page to reflect differences in usage.
Fix broken test.
Uglier than desirable due to Go and Cobra limitations
Signed-off-by: Ed Santiago <santiago@redhat.com>
Currently in podman if a user specifies a command that does not exist
the tool shows the help information. This patch changes it to show
information like:
$ ./bin/podman foobar
Error: unrecognized command 'podman foobar'
Try 'podman --help' for more information.
$ ./bin/podman volume foobar
Error: unrecognized command `podman volume foobar`
Try 'podman volume --help' for more information.
$ ./bin/podman container foobar
Error: unrecognized command `podman container foobar`
Try 'podman container --help' for more information.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The current aliased commands
podman container list
and
podman image list
podman image rm
Do not work properly. The global storage options are broken.
This patch fixes this issue.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* ps now on main command
* sign is no longer on main commmand
* ls, list no longer are valid main aliases for images
* ls, list does work for podman image
Signed-off-by: baude <bbaude@redhat.com>
Subcommands should not be showing the global flags. This causes the important
information to scroll off the screen.
Also fixed a typo on runCommmand (Too many 'm's)
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
In the previous CLI, we had an accurate depiction of commands
available for the remote client and those available for the
local client.
Signed-off-by: baude <bbaude@redhat.com>
We intend to migrate to the cobra cli from urfave/cli because the
project is more well maintained. There are also some technical reasons
as well which extend into our remote client work.
Signed-off-by: baude <bbaude@redhat.com>
addition of import and export for the podman-remote client. This includes
the ability to send and receive files between the remote-client and the
"podman" host using an upgraded varlink connection.
Signed-off-by: baude <bbaude@redhat.com>
Masking main level, image, and container commands that are not yet
implemented for the remote client. As each command is completed, be
sure to unmask it.
Also, masking podman command line switches that are not applicable
to the remote client.
Signed-off-by: baude <bbaude@redhat.com>
Allow multiple alias for listing containers and images.
Also fix documentation for umount and unmount
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow user to prune unused/unnamed images, the layer images from building,
via podman rmi --prune.
Allow user to prune stopped/exiuted containers via podman rm --prune.
This should resolve#1910
Signed-off-by: baude <bbaude@redhat.com>
Add an exists subcommand to podman container and podman image that allows
users to verify the existence of a container or image by ID or name. The return
code can be 0 (success), 1 (failed to find), or 125 (failed to work with runtime).
Issue #1845
Signed-off-by: baude <bbaude@redhat.com>
runc uses CRIU to support checkpoint and restore of containers. This
brings an initial checkpoint/restore implementation to podman.
None of the additional runc flags are yet supported and container
migration optimization (pre-copy/post-copy) is also left for the future.
The current status is that it is possible to checkpoint and restore a
container. I am testing on RHEL-7.x and as the combination of RHEL-7 and
CRIU has seccomp troubles I have to create the container without
seccomp.
With the following steps I am able to checkpoint and restore a
container:
# podman run --security-opt="seccomp=unconfined" -d registry.fedoraproject.org/f27/httpd
# curl -I 10.22.0.78:8080
HTTP/1.1 403 Forbidden # <-- this is actually a good answer
# podman container checkpoint <container>
# curl -I 10.22.0.78:8080
curl: (7) Failed connect to 10.22.0.78:8080; No route to host
# podman container restore <container>
# curl -I 10.22.0.78:8080
HTTP/1.1 403 Forbidden
I am using CRIU, runc and conmon from git. All required changes for
checkpoint/restore support in podman have been merged in the
corresponding projects.
To have the same IP address in the restored container as before
checkpointing, CNI is told which IP address to use.
If the saved network configuration cannot be found during restore, the
container is restored with a new IP address.
For CRIU to restore established TCP connections the IP address of the
network namespace used for restore needs to be the same. For TCP
connections in the listening state the IP address can change.
During restore only one network interface with one IP address is handled
correctly. Support to restore containers with more advanced network
configuration will be implemented later.
v2:
* comment typo
* print debug messages during cleanup of restore files
* use createContainer() instead of createOCIContainer()
* introduce helper CheckpointPath()
* do not try to restore a container that is paused
* use existing helper functions for cleanup
* restructure code flow for better readability
* do not try to restore if checkpoint/inventory.img is missing
* git add checkpoint.go restore.go
v3:
* move checkpoint/restore under 'podman container'
v4:
* incorporated changes from latest reviews
Signed-off-by: Adrian Reber <areber@redhat.com>
Execute the command as described by a container image. The value of the label is processed
into a command by:
1. Ensuring the first argument of the command is podman.
2. Substituting any variables with those defined by the environment or otherwise.
If no label exists in the container image, nothing is done.
podman container runlabel LABEL IMAGE extra_args
Signed-off-by: baude <bbaude@redhat.com>
Don't print potentially verbose help messages in case of usage errors,
but print only the usage error followed by a pointer to the command's
help. This aligns with Docker.
```
$ podman run -h
flag needs an argument: -h
See 'podman run --help'.
```
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1379
Approved by: rhatdan
When we run containers in detach mode, nothing cleans up the network stack or
the mount points. This patch will tell conmon to execute the cleanup code when
the container exits.
It can also be called to attempt to cleanup previously running containers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #942
Approved by: mheon
baude
Ed Santiago
Daniel J Walsh
Adrian Reber
Valentin Rothberg
Matthew Heon