systemd expects the container_uuid environment variable be set
when it is running in a container.
Fixes: https://github.com/containers/podman/issues/13187
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The kernel never sets the inheritable capabilities for a process, they
are only set by userspace. Emulate the same behavior.
Closes: CVE-2022-27649
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Allows users to set `--os` , `--arch` and `--variant` of the image
created from the custom import.
Following is useful when user is already aware of the values which are
correct for their generated rootfs
Signed-off-by: Aditya R <arajan@redhat.com>
podman build fails on remote build when using a relative context directory.
This is because the context dir was not being added to the tar, so when remote
the compat build function would not be able to stat the contextDir.
resolves#13293
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Still an unknown number remains but I am running out of patience.
Adding dots is not the best use of my time.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Make sure we're waiting for the ls container to finish to prevent
potential flakes or future regressions.
Spotted while enabling a linter.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Containers started with `--no-healthcheck` are configured to contain no
healthcheck and test configured as `NONE`. Podman shows wrong status as
such use cases.
Following commit fixes the faulty behavior of stauts field for
containers started with `--no-healthcheck`
Signed-off-by: Aditya R <arajan@redhat.com>
The calculate the percentage we need floating point numbers. The current
code however casted the result of reclaimable/size to an int first.
Casting to an int in go will just discard the decimal points, thus the
result was either 0 or 1 so if multiplied by 100 it would show up as 0%
or 100%.
To fix this we have to multiply by 100 first before casting the result
to an int. Also add a check for div by zero which results in NaN and use
math.Round() to correctly round a number.
Ref #13516
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
One of the pod tests was leaving a stray image behind,
causing scary red warnings in CI logs. Clean that up.
Also, now that #13541 has merged, use 'rmi --ignore' instead of
ignoring exit status from rmi
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add an `--ignore` flag to `podman image rm` to instruct ignoring image
if a specified image does not exist and to not throw an error. Other
commands (e.g., `podman container rm`) already support this flag.
Such an `--ignore` flag can come in handy in clean-up scripcts such as
the teardown phases in the Podman tests.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Update the login tests to reflect the latest changes to allow http{s}
prefixes (again) to address bugzilla.redhat.com/show_bug.cgi?id=2062072.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Compose v2 uses dashes as separators instead of hyphens. This
broke some tests that relied upon container names. Set the name
conditionally to make it safe for both.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Make sure to ignore local {container,docker}ignore files when building a
local pause image. Otherwise, we may mistakenly not be able to copy
catatonit into the build container.
Fixes: #13529
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
When podman generate systemd is invoked, it previously did not check if
container-prefix or pod-prefix are empty. When these are empty, the file name
starts with the separator, which is hyphen by default. This results in files
like '-containername.service'.
The code now checks if these prefixes are empty. If they are, the filename no
longer adds a separator. Instead, it uses name or ID of the container or pod.
Closes#13272
Signed-off-by: Nirmal Patel <npate012@gmail.com>
* systemctl stop podman.service will now return exit code 0
* Update test framework to support JSON boolean and numeric values
Signed-off-by: Jhon Honce <jhonce@redhat.com>
There is a lot of unneeded code, k8s is the by far the biggest
dependency in podman. We should remove as much as possible so that we
only have the stuff left that we use.
This is just a quick skim over the code which removes a lot of the
generated code and many packages that are now unused.
I know that this will be impossible to properly review. I will try to
make smaller changes in follow up work.
Right now this reduces about 8 MB in binary size!!!
[NO NEW TESTS NEEDED] Hopefully existing tests will catch any problems.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We only need a small part of the k8s dependencies but they are the
biggest dependencies in podman by far. Moving them into podman allows us
to remove the unnecessary parts.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
All podman tests in CI expects exit code 125, which might not be true since exit code from runtime
is relayed as it is without any modification both in `buildah` and `podman`. Following behviour is seen when PR https://github.com/containers/buildah/pull/3809
added a test here https://github.com/containers/buildah/blob/main/tests/bud.bats#L3183 which relays exit code from runtime as it
is, in case of both `podman` and `buildah`. However apart from this test case no other test case was able to trigger this behviour hence
marking this test as an anomaly. Since its debatable if we should override this returned error number or not hence adding a note here.
Signed-off-by: Aditya R <arajan@redhat.com>
Bumps
c/buildah to -> `v1.24.3-0.20220310160415-5ec70bf01ea5`
c/storage to -> `v1.38.3-0.20220308085612-93ce26691863`
c/image to -> `v5.20.1-0.20220310094651-0d8056ee346f`
Signed-off-by: Aditya R <arajan@redhat.com>
Allow users to add annotions in the podman play kube command.
This PR Also fixes the fact that annotations in the pod spec were
not being passed down to containers.
Fixes: https://github.com/containers/podman/issues/12968
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The permissions on disk were wrong since we were not converting to
octal.
Fixes: https://github.com/containers/podman/issues/13108
[NO NEW TESTS NEEDED] Since we don't currently test using the docker
client
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
pprof tests are way too flaky, and are causing problems for
community contributors who don't have privs to press Re-run.
There has been no activity or interest in fixing the bug,
and it's not something I can fix. So, just disable the test.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Secret-verify-leak is causing flakes, when running in parallel tests.
This is because remote secrets are copied into the context directory to
send to the API server, and secret-verify-leak is doing a COPY * and
then checking if the temporary secret file ends up in the container or
not. Since all the temporary files are prefixed with
"podman-build-secret", this test checks if podman-build-secret is in the
image. However, when run in parallel with other tests, other temporary
podman-build-secrets might be in the context dir. Moving
secret-verify-leak into its own directory makes sure that the context
dir is used only by this one test.
Also renamed Dockerfile -> Containerfile and cleaned up unused
Containerfiles.
Signed-off-by: Ashley Cui <acui@redhat.com>
The default rule should be set at the head of device configuration.
Otherwise, rules for user devices are overridden by the default rule so
that any access to the user devices are denied.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Error out if the kube yaml passed to play kube has more
than one container or init container with the same name.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
* Add configuration to add report header for python client used in tests
* Move report headers into the individual test runners vs runner.sh
Signed-off-by: Jhon Honce <jhonce@redhat.com>
do not attempt to use cgroups with pods if the cgroups are disabled.
A similar check is already in place for containers.
Closes: https://github.com/containers/podman/issues/13411
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
While resolving `workdir` we mostly create a `workdir` when `stat`
fails with `ENOENT` or `ErrNotExist` however following cases are not
true when user explicitly specifies a `workdir` while `running` using
`--workdir` which tells `podman` to only use workdir if its exists on
the container. Following configuration is implicity set with other
`run` mechanism like `podman play kube`
Problem with explicit `--workdir` or similar implicit config in `podman play
kube` is that currently podman ignores the fact that workdir can also be
a `symlink` and actual `link` could be valid.
Hence following commit ensures that in such scenarios when a `workdir`
is not found and we cannot create a `workdir` podman must perform a
check to ensure that if `workdir` is a `symlink` and `link` is resolved
successfully and resolved link is present on the container then we
return as it is.
Docker performs a similar behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
* Add which python client is being used to run tests, see "python
client" below.
* Remove redundate code from test classes
* Update/Add comments to modules and classes
======================================================= test session starts ========================================================
platform linux -- Python 3.10.0, pytest-6.2.4, py-1.10.0, pluggy-0.13.1
python client -- DockerClient
rootdir: /home/jhonce/Projects/go/src/github.com/containers/podman
plugins: requests-mock-1.8.0
collected 33 items
test/python/docker/compat/test_containers.py ...s.............. [ 54%]
test/python/docker/compat/test_images.py ............ [ 90%]
test/python/docker/compat/test_system.py ... [100%]
Note: Follow-up PRs will verify the test results and expand the tests.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This option was requested so that users could specify alternate
locations to find context directories for each image build. It
requites the --build option to be set.
Partion Fix: https://github.com/containers/podman/issues/12485
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to commit containers into a single layer.
Usage
```bash
podman container commit --squash <name>
```
Signed-off-by: Aditya R <arajan@redhat.com>
When removing a container created with a --volumes-from a container
created with a built in volume, we complain if the original container
still exists. Since this is an expected state, we should not complain
about it.
Fixes: https://github.com/containers/podman/issues/12808
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When a test which creates a network fail it will not remove the network.
The teardown logic should remove the networks. Since there is no --all
option for network rm we use network prune --force.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`podman play kube` tries to build images even if `--build` is set to
false so lets honor that and make `--build` , `true` by default so it
matches the original behviour.
Signed-off-by: Aditya R <arajan@redhat.com>
Add a extra `See 'podman command --help'` to the error output.
With this patch you now get:
```
$ podman run -h
Error: flag needs an argument: 'h' in -h
See 'podman run --help'
```
Fixes#13082Fixes#13002
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
We're running into problems that are impossible to diagnose
because we have no idea if the SUT is using netavark or CNI.
We've previously run into similar problems with runc/crun,
or cgroups 1/2.
This adds a one-line 'echo' with important system info. Now,
when viewing a full test log, it will be possible to view
system settings in one glance.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman container clone takes the id of an existing continer and creates a specgen from the given container's config
recreating all proper namespaces and overriding spec options like resource limits and the container name if given in the cli options
this command utilizes the common function DefineCreateFlags meaning that we can funnel as many create options as we want
into clone over time allowing the user to clone with as much or as little of the original config as they want.
container clone takes a second argument which is a new name and a third argument which is an image name to use instead of the original container's
the current supported flags are:
--destroy (remove the original container)
--name (new ctr name)
--cpus (sets cpu period and quota)
--cpuset-cpus
--cpu-period
--cpu-rt-period
--cpu-rt-runtime
--cpu-shares
--cpuset-mems
--memory
--run
resolves#10875
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
The CONTAINERS_CONF environment variable can be used to override the
configuration file, which is useful for testing. However, at the moment
this variable is not propagated to conmon. That means in particular, that
conmon can't propagate it back to podman when invoking its --exit-command.
The mismatch in configuration between the starting and cleaning up podman
instances can cause a variety of errors.
This patch also adds two related test cases. One checks explicitly that
the correct CONTAINERS_CONF value appears in conmon's environment. The
other checks for a possible specific impact of this bug: if we use a
nonstandard name for the runtime (even if its path is just a regular crun),
then the podman container cleanup invoked at container exit will fail.
That has the effect of meaning that a container started with -d --rm won't
be correctly removed once complete.
Fixes#12917
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This comment refers to overiding $PODMAN although the code below does
nothing of the sort. Presumbly the comment has been outdated by altering
the containers.conf / $CONTAINERS_CONF instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We could remove the container running the volume plugins, before
the containers using the volume plugins; this could cause
unmounting the volumes to fail because the plugin could not be
contacted.
Signed-off-by: Matthew Heon <mheon@redhat.com>
It looks like some descriptions have changed on the docker registry
where we had been searching for images that include 'alpine'. We are
now seeing an image in the initial list that has 'alpine' in its
description.
Signed-off-by: Brent Baude <bbaude@redhat.com>
For the since and after imagve filter tests, instead of using the
read-only cache of images, we just use the empty r/w store. We then
build three images that are strictly predictable.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Checkpoint/restore pod tests are not running with an older runc and now
that runc 1.1.0 appears in the repositories it was detected that the
tests were failing. This was not detected in CI as CI was not using runc
1.1.0 yet.
Signed-off-by: Adrian Reber <areber@redhat.com>
The `podman network connect` and `podman network disconnect`
commands give containers access to different networks than the
ones they were created with; these networks can also have DNS
servers associated with them. Until now, however, we did not
modify resolv.conf as network membership changed.
With this PR, `podman network connect` will add any new
nameservers supported by the new network to the container's
/etc/resolv.conf, and `podman network disconnect` command will do
the opposite, removing the network's nameservers from
`/etc/resolv.conf`.
Fixes#9603
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Ensure meaningful behaviour when called with /v3.x.x semantics
* Change return code to 409 from 500 when client attempts to use an
existing network name
* Update API bats test runner to support /v4.0.0 endpoints by default
Signed-off-by: Jhon Honce <jhonce@redhat.com>
When running podman inside systemd user units, it is possible that
systemd kills the rootless netns slirp4netns process because it was
started in the default unit cgroup. When the unit is stopped all
processes in that cgroup are killed. Since the slirp4netns process is
run once for all containers it should not be killed. To make sure
systemd will not kill the process we move it to the user.slice.
Fixes#13153
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Giuseppe Scrivano