`go get github.com/cri-o/ocicni@deac903fd99b6c52d781c9f42b8db3af7dcfd00a`
I had to fix compilation errors in libpod/networking_linux.go
---
ocicni.Networks has changed from string to the structure NetAttachment
with the member Name (the former string value) and the member Ifname
(optional).
I don't think we can make use of Ifname here, so I just map the array of
structures to array of strings - e.g. dropping Ifname.
---
The function GetPodNetworkStatus no longer returns Result but it returns
the wrapper structure NetResult which contains the former Result plus
NetAttachment (Network name and Interface name).
Again, I don't think we can make use of that information here, so I
just added `.Result` to fix the build.
---
Issue: #1136
Signed-off-by: Jakub Filak <jakub.filak@sap.com>
Pull in changes to pkg/secrets/secrets.go that adds the
logic to disable fips mode if a pod/container has a
label set.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Use the github.com/seccomp/containers-golang library instead of the
docker package. The docker package has changed and silently broke
on F31.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When an image can be opened as an ImageSource but not an Image, handle
the case where it's an image list all by itself, the case where it's an
image for a different architecture/OS combination, or the case where
it's both.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Move to containers/image v5 and containers/buildah to v1.11.4.
Replace an equality check with a type assertion when checking for a
docker.ErrUnauthorizedForCredentials in `podman login`.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Do not discard errors when panicing on lockfile open
* config: drop skip_mount_home
* storage: drop ostree deduplication
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This requires updating all import paths throughout, and a matching
buildah update to interoperate.
I can't figure out the reason for go.mod tracking
github.com/containers/image v3.0.2+incompatible // indirect
((go mod graph) lists it as a direct dependency of libpod, but
(go list -json -m all) lists it as an indirect dependency),
but at least looking at the vendor subdirectory, it doesn't seem
to be actually used in the built binaries.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
* Update generated files
* ImageBigData: distinguish between no-such-image and no-such-item
* ImageSize: don't get tripped up by images with no layers
* tarlogger: disable raw accouting
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
use the inotify backend to be notified on the container exit instead
of polling continuosly the runtime. Polling the runtime slowns
significantly down the podman execution time for short lived
processes:
$ time bin/podman run --rm -ti fedora true
real 0m0.324s
user 0m0.088s
sys 0m0.064s
from:
$ time podman run --rm -ti fedora true
real 0m4.199s
user 0m5.339s
sys 0m0.344s
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
drop the pkg/firewall module and start using the firewall CNI plugin.
It requires an updated package for CNI plugins.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is a breaking change and modifies the resulting image name when
pulling from an directory via `oci:...`.
Without this patch, the image names pulled via a local directory got
processed incorrectly, like this:
```
> podman pull oci:alpine
> podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
localhost/oci alpine 4fa153a82426 5 weeks ago 5.85 MB
```
We now use the same approach as in the corresponding [buildah fix][1] to
adapt the behavior for correct `localhost/` prefixing.
[1]: https://github.com/containers/buildah/pull/1800
After applying the patch the same OCI image pull looks like this:
```
> ./bin/podman pull oci:alpine
> podman images
REPOSITORY TAG IMAGE ID CREATED SIZE
localhost/alpine latest 4fa153a82426 5 weeks ago 5.85 MB
```
End-to-end tests have been adapted as well to cover the added scenario.
Relates to: https://github.com/containers/buildah/issues/1797
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
Udica is adding new features to allow users to define container process
and file types. This would allow us to setup trusted communications channels
between multiple security domains. ContainerA -> ContainerB -> ContainerC
Add tests to make sure users can change file types
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Touch up a number of formating issues for XDG_RUNTIME_DIRS in a number
of man pages. Make use of the XDG_CONFIG_HOME environment variable
in a rootless environment if available, or set it if not.
Also added a number of links to the Rootless Podman config page and
added the location of the auth.json files to that doc.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
* progress bar: use spinners for unknown blob sizes
* use 'containers_image_ostree' as build tag
* ostree: default is no OStree support
* Add "Env" to ImageInspectInfo
* config.go: improve debug message
* config.go: log where credentials come from
* Fix typo in docs/containers-registries.conf.5.md
* docker: delete: support all MIME types
* Try harder in storageImageDestination.TryReusingBlob
* docker: allow deleting OCI images
* ostree: improve error message
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we first began writing Podman, we ran into a major issue
when implementing Inspect. Libpod deliberately does not tie its
internal data structures to Docker, and stores most information
about containers encoded within the OCI spec. However, Podman
must present a CLI compatible with Docker, which means it must
expose all the information in 'docker inspect' - most of which is
not contained in the OCI spec or libpod's Config struct.
Our solution at the time was the create artifact. We JSON'd the
complete CreateConfig (a parsed form of the CLI arguments to
'podman run') and stored it with the container, restoring it when
we needed to run commands that required the extra info.
Over the past month, I've been looking more at Inspect, and
refactored large portions of it into Libpod - generating them
from what we know about the OCI config and libpod's (now much
expanded, versus previously) container configuration. This path
comes close to completing the process, moving the last part of
inspect into libpod and removing the need for the create
artifact.
This improves libpod's compatability with non-Podman containers.
We no longer require an arbitrarily-formatted JSON blob to be
present to run inspect.
Fixes: #3500
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is needed for dual stack IPv6 support within CRI-O. Because the API
changed within OCICNI, we have to adapt the internal linux networking as
well.
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
In c/image, this adds the the mirror-by-digest-only option to mirrors, and
moves the search order to an independent list.
A synchronized buildah update is necessary to deal with the c/image API change.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
add the ability for the podman remote client to use a configuration file
which describes its connections. users can now define a connection the
configuration and then call it by name like:
podman-remote -c connection1
and the destination and user will be derived from the configuration
file. if no -c is provided, we look for a connection in the
configuration file designated as 'default'. If the configuration file
has only one connection, it will be deemed the 'default'.
Signed-off-by: baude <bbaude@redhat.com>
Mainly add support for podman build using --overlay mounts.
Updates containers/image also adds better support for new registries.conf
file.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
allow the user to define a remote host and remote username for their
remote podman sessions. this is then feed to the varlink "bridge" as
the ssh credentials and endpoint.
Signed-off-by: baude <bbaude@redhat.com>
build a podman-remote binary for windows that allows users to use the
remote client on windows and interact with podman on linux system.
Signed-off-by: baude <bbaude@redhat.com>
Lots of fixes for issues found by podman.
overlay: propagate errors from mountProgram
utils: root in a userns uses global conf file
Fix handling of additional stores
Correctly check permissions on rootless directory
Fix possible integer overflow on 32bit builds
Evaluate device path for lvm
lockfile test: make concurrent RW test determinisitc
lockfile test: make concurrent read tests deterministic
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Vendors in fsouza/docker-client, docker/docker and
a few more related. Of particular note, changes to the TweakCapabilities()
function from docker/docker along with the parse.IDMappingOptions() function
from Buildah. Please pay particular attention to the related changes in
the call from libpod to those functions during the review.
Passes baseline tests.
OpenShift Merge Robot
dependabot-preview[bot]
Jakub Filak
Urvashi Mohnani
Valentin Rothberg
Nalin Dahyabhai
Jhon Honce
Miloslav Trmač
TomSweeneyRedHat
baude
Sascha Grunert
Giuseppe Scrivano
Matthew Heon
Daniel J Walsh
Peter Hunt
Matthew Heon
Qi Wang