Added support for "podman buildx inspect". The goal was to replicate the default output from "docker buildx inspect" as
much as possible but a problem encountered was podman not supporting BuildKit. To replicate the output I resorted to
printing the statements with default values but only changed the driver name to use podman instead of docker. Since
there was no buildkit, gave it the value of "N/A" to depict it's not supported. For Platforms, I resorted to using
the emulated architectures found on your linux system + the host architecture of your local machine or podman server. The
bootstrap flag was also added but is considered a NOP since there is no buildkit container to run before running inspect.
An extra field was added to the HostInfo struct so when you run "podman info" the emulated architectures will show, this
was used so you can grab the information from the podman engine.
Fixes#13014
Signed-off-by: Joshua Arrevillaga <2004jarrevillaga@gmail.com>
This commit adds two new annotations named
io.podman.annotations.cpuset/$ctrname and
io.podman.annotations.memory-nodes/$ctrname
The first one allows restricting a container's execution to specific
CPU cores while the second restricts memory allocations to specific
NUMA memory nodes. They are also added automatically when the
--cpuset-cpus and --cpuset-mems options are used.
Fixes: containers#26172
Signed-off-by: François Poirotte <clicky@erebot.net>
Previously, the HealthCheck exec session would not terminate on timeout, allowing the healthcheck to run indefinitely.
Fixes: https://issues.redhat.com/browse/RHEL-86096
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
This was added by commit 84e42877a ("make lint: re-enable revive"),
making nolintlint became almost useless.
Remove the ungodly amount of unused nolint annotations.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This commit adds new annotation called:
io.podman.annotations.pids-limit/$ctrname
This annotation is used to define the PIDsLimit for
a particular pod. It is also automatically defined
when newly added --pids-limit option is used.
Fixes: #24418
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
BuildOrigin is a field that can be set at build time by packagers. This helps us trace how and where the binary was built and installed from, allowing us to see if the issue is due to a specfic installation or a general podman bug. This field shows up in podman version and in podman info when populated. Note that podman info has a new field, Client, that only appears when running podman info using the remote client.
Automatically set the BuildOrigin field when building the macOS pkginstaller to pkginstaller.
Usage: make podman-remote BUILD_ORIGIN="mypackaging"
Signed-off-by: Ashley Cui <acui@redhat.com>
Fixes: https://github.com/containers/podman/issues/25002
Also add the ability to inspect containers for
UseImageHosts and UseImageHostname.
Finally fixed some bugs in handling of --no-hosts for Pods,
which I descovered.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add --hosts-file flag to container create, container run and pod create
* Add HostsFile field to pod inspect and container inspect results
* Test BaseHostsFile config in containers.conf
Signed-off-by: Gavin Lam <gavin.oss@tutamail.com>
New flags in a `podman update` can change the configuration of HealthCheck when the container is started, without having to restart or recreate the container.
This can help determine why a given container suddenly started failing HealthCheck without interfering with the services it provides. For example, reconfigure HealthCheck to keep logs longer than the usual last X results, store logs to other destinations, etc.
Fixes: https://issues.redhat.com/browse/RHEL-60561
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add support for inspecting Mounts which include SubPaths.
Handle SubPaths for kubernetes image volumes.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
A field we missed versus Docker. Matches the format of our
existing Ports list in the NetworkConfig, but only includes
exposed ports (and maps these to struct{}, as they never go to
real ports on the host).
Fixes https://issues.redhat.com/browse/RHEL-60382
Signed-off-by: Matt Heon <mheon@redhat.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
The kube generate command can now generate a yaml for
the Job kind and the kube play command can create a pod
and containers with podman when passed in a Job yaml.
Add relevant tests and docs for this.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
This started off as an attempt to make `podman stop` on a
container started with `--rm` actually remove the container,
instead of just cleaning it up and waiting for the cleanup
process to finish the removal.
In the process, I realized that `podman run --rmi` was rather
broken. It was only done as part of the Podman CLI, not the
cleanup process (meaning it only worked with attached containers)
and the way it was wired meant that I was fairly confident that
it wouldn't work if I did a `podman stop` on an attached
container run with `--rmi`. I rewired it to use the same
mechanism that `podman run --rm` uses, so it should be a lot more
durable now, and I also wired it into `podman inspect` so you can
tell that a container will remove its image.
Tests have been added for the changes to `podman run --rmi`. No
tests for `stop` on a `run --rm` container as that would be racy.
Fixes#22852
Fixes RHEL-39513
Signed-off-by: Matt Heon <mheon@redhat.com>
The current code did something like this:
lock()
getState()
unlock()
if state != running
lock()
getState() == running -> error
unlock()
This of course is wrong because between the first unlock() and second
lock() call another process could have modified the state. This meant
that sometimes you would get a weird error on start because the internal
setup errored as the container was already running.
In general any state check without holding the lock is incorrect and
will result in race conditions. As such refactor the code to combine
both StartAndAttach and Attach() into one function that can handle both.
With that we can move the running check into the locked code.
Also use typed error for this specific error case then the callers can
check and ignore the specific error when needed. This also allows us to
fix races in the compat API that did a similar racy state check.
This commit changes slightly how we output the result, previously a
start on already running container would never print the id/name of the
container which is confusing and sort of breaks idempotence. Now it will
include the output except when --all is used. Then it only reports the
ids that were actually started.
Fixes#23246
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The v5 API made a breaking change for podman inspect, this means that
an old client could not longer parse the result from the new 5.X server.
The other way around new client and old server already worked.
As it turned out there were several users that run into this, one case
to hit this is using an old 4.X podman machine wich now pulls a newer
coreos with podman 5.0. But there are also other users running into it.
In order to keep the API working we now have a version check and return
the old v4 compatible payload so the old remote client can still work
against a newer server thus removing any major breaking change for an
old client.
Fixes#22657
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Effectively, this is an ability to take an image already pulled
to the system, and automatically mount it into one or more
containers defined in Kubernetes YAML accepted by `podman play`.
Requirements:
- The image must already exist in storage.
- The image must have at least 1 volume directive.
- The path given by the volume directive will be mounted from the
image into the container. For example, an image with a volume
at `/test/test_dir` will have `/test/test_dir` in the image
mounted to `/test/test_dir` in the container.
- Multiple images can be specified. If multiple images have a
volume at a specific path, the last image specified trumps.
- The images are always mounted read-only.
- Images to mount are defined in the annotation
"io.podman.annotations.kube.image.automount/$ctrname" as a
semicolon-separated list. They are mounted into a single
container in the pod, not the whole pod.
As we're using a nonstandard annotation, this is Podman only, any
Kubernetes install will just ignore this.
Underneath, this compiles down to an image volume
(`podman run --mount type=image,...`) with subpaths to specify
what bits we want to mount into the container.
Signed-off-by: Matt Heon <mheon@redhat.com>
This is something Docker does, and we did not do until now. Most
difficult/annoying part was the REST API, where I did not really
want to modify the struct being sent, so I made the new restart
policy parameters query parameters instead.
Testing was also a bit annoying, because testing restart policy
always is.
Signed-off-by: Matt Heon <mheon@redhat.com>
Useful to tell whether containers are being made with pasta or
slirp4netns by default. Info is bloated enough already that I
don't really have concerns about shoving more into it.
Fixes#22172
Signed-off-by: Matt Heon <mheon@redhat.com>
Fix following issues:
- create container API handler ignores Annotations from HostConfig
- inspect container API handler does not provide Annotations as
part of HostConfig
Signed-off-by: diplane <diplane3d@gmail.com>
The reserved annotation io.podman.annotations.volumes-from is made public to let user define volumes-from to have one container mount volumes of other containers.
The annotation format is: io.podman.annotations.volumes-from/tgtCtr: "srcCtr1:mntOpts1;srcCtr2:mntOpts;..."
Fixes: containers#16819
Signed-off-by: Vikas Goel <vikas.goel@gmail.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
This mirrors how the Docker API handles things, allowing us to be
more compatible with Docker and more verbose on the Libpod API.
Stats are given as per network interface in the container, but
still aggregated for `podman stats` and `podman pod stats`
display (so the CLI does not change, only the Libpod and Compat
APIs).
Signed-off-by: Matt Heon <mheon@redhat.com>
When inspecting a container that does not define any health check, the health field should return nil. This matches docker behavior.
Signed-off-by: Ashley Cui <acui@redhat.com>
When InitialDelaySeconds in the kube yaml is set for a helthcheck,
don't update the healthcheck status till those initial delay seconds are over.
We were waiting to update for a failing healtcheck, but when the healthcheck
was successful during the initial delay time, the status was being updated as healthy
immediately.
This is misleading to the users wondering why their healthcheck takes
much longer to fail for a failing case while it is quick to succeed for
a healthy case. It also doesn't match what the k8s InitialDelaySeconds
does. This change is only for kube play, podman healthcheck run is
unaffected.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add podman farm build command that sends out builds to
nodes defined in the farm, builds the images on the farm
nodes, and pulls them back to the local machine to create
a manifest list.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Add --rdt-class=COS to the create and run command to enable the
assignment of a container to a Class of Service (COS). The COS
represents a part of the cache based on the Cache Allocation Technology
(CAT) feature that is part of Intel's Resource Director Technology
(Intel RDT) feature set. By assigning a container to a COS, all PID's of
the container have only access to the cache space defined for this COS.
The COS has to be pre-configured based on the resctrl kernel driver.
cat_l2 and cat_l3 flags in /proc/cpuinfo represent CAT support for cache
level 2 and 3 respectively.
Signed-off-by: Wolfgang Pross <wolfgang.pross@intel.com>
Also add a new `StoppedByUser` field to the container-inspect state
which can be useful during debugging and is now also used in the
regression test. Note that I moved the `false` check one test above
such that we can compare the previous Podman version which should just
be stuck in the `wait $ctr` command since it will continue restarting.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Add io.podman.annotations.infra.name annotation to kube play so
users can set the name of the infra container created.
When a pod is created with --infra-name set, the generated
kube yaml will have an infraName annotation set that will
be used when playing the generated yaml with podman.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
openshift-merge-bot[bot]
Joshua Arrevillaga
François Poirotte
Jan Rodák
flouthoc
Kir Kolyshkin
Jan Kaluza
Giuseppe Scrivano
Ashley Cui
Daniel J Walsh
Gavin Lam
Matt Heon
Urvashi Mohnani
Paul Holzinger
diplane
Florian Bezannier
Vikas Goel
Anchit Bajaj
Wolfgang Pross
danishprakash
Valentin Rothberg