Introduce a new option "size" to configure the maximum size of the
user namespace configured by keep-id.
Closes: https://github.com/containers/podman/issues/24837
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This way has a huge disadvantage: The user will not see an error when he
uses a non-existent option. Another disadvantage is, that if we add more
options within podman, they might collide with the names chosen by
plugins. Such issues might be hard to debug.
The advantage is that the usage is very nice:
--network bridge:opt1=val1,opt2=val2.
Alternatively, we could put this behind `opt=`, which is harder to use,
but would solve all issues above:
--network bridge:opt=opt1=val1,opt=opt2=val2
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
pasta doesn't switch to nobody when we already run in a userns so we can
use it there. The unshare package checks the same condition and returns
true even if uid 0 in this case so we can directly call this.
ref https://github.com/containers/podman/issues/17840#issuecomment-2343251014
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
The pasta network mode has been added in podman v4.4 and this causes a
conflict with named networks that could also be called "pasta". To not
break anything we had special logic to prefer the named network over the
network mode. Now with 5.0 we can break this and remove this awkward
special handling from the code.
Containers created with 4.X that use a named network pasta will also
continue to work fine, this chnage will only effect the creation of new
containers with a named network pasta and instead always used the
network mode pasta. We now also block the creation of networks with the
name "pasta".
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
We should have done this much earlier, most of the times CNI networks
just mean networks so I changed this and also fixed some function
names. This should make it more clear what actually refers to CNI and
what is just general network backend stuff.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Also fix a number of duplicate words. Yet disable the new `dupword`
linter as it displays too many false positives.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Conceptually equivalent to networking by means of slirp4netns(1),
with a few practical differences:
- pasta(1) forks to background once networking is configured in the
namespace and quits on its own once the namespace is deleted:
file descriptor synchronisation and PID tracking are not needed
- port forwarding is configured via command line options at start-up,
instead of an API socket: this is taken care of right away as we're
about to start pasta
- there's no need for further selection of port forwarding modes:
pasta behaves similarly to containers-rootlessport for local binds
(splice() instead of read()/write() pairs, without L2-L4
translation), and keeps the original source address for non-local
connections like slirp4netns does
- IPv6 is not an experimental feature, and enabled by default. IPv6
port forwarding is supported
- by default, addresses and routes are copied from the host, that is,
container users will see the same IP address and routes as if they
were in the init namespace context. The interface name is also
sourced from the host upstream interface with the first default
route in the routing table. This is also configurable as documented
- sandboxing and seccomp(2) policies cannot be disabled
- only rootless mode is supported.
See https://passt.top for more details about pasta.
Also add a link to the maintained build of pasta(1) manual as valid
in the man page cross-reference checks: that's where the man page
for the latest build actually is -- it's not on Github and it doesn't
match any existing pattern, so add it explicitly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
add two new options to the keep-id user namespace option:
- uid: allow to override the UID used inside the container.
- gid: allow to override the GID used inside the container.
For example, the following command will map the rootless user (that
has UID=0 inside the rootless user namespace) to the UID=11 inside the
container user namespace:
$ podman run --userns=keep-id:uid=11 --rm -ti fedora cat /proc/self/uid_map
0 1 11
11 0 1
12 12 65525
Closes: https://github.com/containers/podman/issues/15294
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We now use the golang error wrapping format specifier `%w` instead of
the deprecated github.com/pkg/errors package.
[NO NEW TESTS NEEDED]
Signed-off-by: Sascha Grunert <sgrunert@redhat.com>
When podman-remote is used we should not resolve the default network
mode on the client. Defaults should be set on the server. In this case
this is important because we have different defaults for root/rootless.
So when the client is rootless and the server is root we must pick the
root default.
Note that this already worked when --network was set since we did not
parsed the flag in this case. To reproduce you need --network=default.
Also removed a unused function.
[NO NEW TESTS NEEDED] I tested it manually but I am not sure how I can
hook a test like this up in CI. The client would need to run as rootless
and the server as root or the other way around.
Fixes#14368
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
golint, scopelint and interfacer are deprecated. golint is replaced by
revive. This linter is better because it will also check for our error
style: `error strings should not be capitalized or end with punctuation or a newline`
scopelint is replaced by exportloopref (already endabled)
interfacer has no replacement but I do not think this linter is
important.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
From a security point of view, it would be nice to be able to map a
rootless usernamespace that does not use your own UID within the
container.
This would add protection against a hostile process escapping the
container and reading content in your homedir.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
separated cgroupNS sharing from setting the pod as the cgroup parent,
made a new flag --share-parent which sets the pod as the cgroup parent for all
containers entering the pod
remove cgroup from the default kernel namespaces since we want the same default behavior as before which is just the cgroup parent.
resolves#12765
Signed-off-by: cdoern <cdoern@redhat.com>
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Signed-off-by: cdoern <cdoern@redhat.com>
This field was only needed for machine to force cni, however you can set
netns="bridge" in the config to have the same effect. This is already
done in the machine setup.
see https://github.com/containers/common/pull/895
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
[NO TESTS NEEDED]
* When using the Namespace type, the field Value was json encoded
with the name "string" vs "value".
Signed-off-by: Jhon Honce <jhonce@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Docker defines an option of "default" which means to
use the default network. We should support this with
the same code path as --network="".
This is important for compatibility with the Docker API.
Fixes: https://github.com/containers/podman/issues/8544
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As described in issue #8507 this commit contains a breaking
change which is not wanted in v2.2.
We can discuss later if we want this in 3.0 or not.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We allow a container to be connected to several cni networks
but only if they are listed comma sperated. This is not intuitive
for users especially since the flag parsing allows multiple string
flags but only would take the last value. see: spf13/pflag#72
Also get rid of the extra parsing logic for pods. The invalid options
are already handled by `pkg/specgen`.
A test is added to prevent a future regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Setting port mappings only works when CNI is configuring our
network (or slirp4netns, in the rootless case). This is not the
case with `--net=host`, `--net=container:`, and joining the
network namespace of the pod we are part of. Instead of allowing
users to do these things and then be confused why they do
nothing, let's match Docker and return a warning that your port
mappings will do nothing.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Kir Kolyshkin
Giuseppe Scrivano
Michael Zimmermann
openshift-merge-bot[bot]
Paul Holzinger
Daniel J Walsh
Matt Heon
Philip Dubé
Oleksandr Redko
Valentin Rothberg
OpenShift Merge Robot
Erik Sjölund
Stefano Brivio
Sascha Grunert
rvandernoort
cdoern
Valentin Rothberg
Jhon Honce
Luap99
Paul Holzinger