If the volume source starts with . resolve the path relative to the
location of the unit file
Update the test code to allow verification of regex for the value in key
value arguments
Add the usage of relative paths to the volume and mount test cases
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
When we searching any image at a container registry,
--cert-dir and --creds could be required
as well as push, pull, etc.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
The --stream flag is being used extensively in the tests and some blog
posts refer to it which has been causing some confusion on why the flag
was hidden. I do not see a good reason to hide it anymore, so unhide it
and add some docs.
[NO NEW TESTS NEEDED] as it's already being tested.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Currently Podman prevents SELinux container separation,
when running within a container. This PR adds a new
--security-opt label=nested
When setting this option, Podman unmasks and mountsi
/sys/fs/selinux into the containers making /sys/fs/selinux
fully exposed. Secondly Podman sets the attribute
run.oci.mount_context_type=rootcontext
This attribute tells crun to mount volumes with rootcontext=MOUNTLABEL
as opposed to context=MOUNTLABEL.
With these two settings Podman inside the container is allowed to set
its own SELinux labels on tmpfs file systems mounted into its parents
container, while still being confined by SELinux. Thus you can have
nested SELinux labeling inside of a container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a way to keep play kube running in the foreground and terminating all pods
after receiving a a SIGINT or SIGTERM signal. The pods will also be
cleaned up after the containers in it have exited.
If an error occurrs during kube play, any resources created till the
error point will be cleane up also.
Add tests for the various scenarios.
Fixes#14522
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Handle the Mount key
Reuse code from the handling of the Volume key
Add E2E Test
E2E Test - Add checker for KeyValue string
Update man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Change podman to Podman
Add a period at the end of all sentences
Co-authored-by: Valentin Rothberg <vrothberg@redhat.com>
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add a note about the restriction of the use of
thre back-ticks in the md files in the options directory.
If this is not done properly, it can quietly corrupt
the compliled man pages.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
Support auto updating containers running inside pods. Similar to
containers, the systemd units need to be generated via
`podman-generate-systemd --new $POD` to generate the pod's units.
Note that auto updating a container inside a pod will restart the entire
pod. Updates of multiple containers inside a pod are batched, such that
a pod is restarted at most once. That is effectively the same mechanism
for auto updating containers in a K8s YAML via the `podman-kube@`
template or via Quadlet.
Updating a single container unit without restarting the entire pod is
not possible. The reasoning behind is that pods are created with
--exit-policy=stop which will render the pod to be stopped when auto
updating the only container inside the pod. The (reverse) dependencies
between the pod and its containers unit have been carefully selected for
robustness. Changes may entail undesired side effects or backward
incompatibilities that I am not comfortable with.
Fixes: #17181
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Somehow the options/secret.md file generated corrupt md which
then generated corrupt .man files. Fix, and add a Makefile
check to prevent this from happening again.
Signed-off-by: Ed Santiago <santiago@redhat.com>
we were previously using an experimental feature in crun, but we lost
this capability once we moved to using the OCI runtime spec to specify
the volume mappings in fdcc2257df.
Add the same feature to libpod, so that we can support relative
positions for the idmaps.
Closes: https://github.com/containers/podman/issues/17517
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Podman machine os apply takes a takes a OCI image with container native ostree functionality and rebases the machine os on that image.
Currently, this requires the guest os inside the vm to use rpm-ostree.
When specifying an image, any container transport may be specified. If a
container transport is not specified, OS apply will attempt to search
the local containers-storage for the image, and if it is not found, it
will then attempt to use the Docker transport to pull from a remote
registry.
The architecture of OS apply is as follows:
podman machine os apply ssh's into the machine and calls podman machine os
apply. on the secondary call to podman machine os apply, apply
recognizes that it is inside the machine and does image operations, and
finally calls rpm-ostree rebase.
Tests are written but commented out, due to the chicken-and-egg problem.
Signed-off-by: Ashley Cui <acui@redhat.com>
Followup to #17486: stricter checks on --format.
* If a subcommand offers autocompletion for templates,
it must also offer a '--format json' option.
* If a subcommand has a --format option that DOES NOT
offer autocompletion for templates, it must be listed
in a hardcoded grandparented-in table of commands
where that's not applicable. (Mostly commands
like build, commit, save, where "format" is used
in the context of "oci/docker").
Only likely to trigger on PRs which add new subcommands,
and is intended to catch oversights.
Also, test for alphanumeric order in man page tables.
Sort all existing tables.
Signed-off-by: Ed Santiago <santiago@redhat.com>
* add tests
* add documentation for --shm-size-systemd
* add support for both pod and standalone run
Signed-off-by: danishprakash <danish.prakash@suse.com>
command tables are chock full of duplication, hence they break.
Look for inconsistencies between the displayed man page name
and the actual man page name:
| foo | [podman-foo(1)](podman-cmd-foo.1.md) | ...
^^^
Inspired by #17474.
We can't actually check the subcommand name (the plain "foo")
because there are many existing subcommands whose name does
not match the man page: rmi vs image-rm, list vs podman-ps.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Very belated successor to #14046.
I don't know why this is so important to me. Probably because we're
doing a halfhearted sloppy job of documenting, and new options get
added, and not documented, and that's just wrong.
I've given up on documenting internal structs. This iteration
has a $Format_Exceptions table defined at the top of the xref
script, enumerating a hardcoded defined set of podman commands
and fields that should remain undocumented.
This iteration also forgives completely-undocumented formats.
If podman-foo has a --format, but podman-foo.1.md does not
list *any* valid fields, the script warns but does not fail.
This at least is better than documenting a random mix of fields.
This version of the xref script is much slower: 10s vs 4. I
think we can live with that in a CI-only script.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Document the identifiers used in the journald events backend. Those can
be used to filter Podman events with journalctl and I need them to be
documented for a blog I am writing at the moment.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
- Don't order the container unit before local-fs.target as that creates
an ordering cycle that triggers other issues.
- Use the example network in the container unit
- Only use groups that exists by default for the volume
Signed-off-by: Timothée Ravier <tim@siosm.fr>
Add support for disabeling SELinux process separation in the container.
Add support for setting the process type of the container.
Add support for setting the process MCS level of the container.
Add support for setting the file type of the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently we are shipping no data about quadlet, since the
podman-systemd.unit file is not shipped. Also want to add the
quadlet name to the description of the man page so that
man -k quadlet
will help users find the man page.
Also add a link file such that if the user types in
man quadlet
man will show the podman-systemd.unit file.
Also eliminate the subpackage podman-quadlet
Fixes: https://github.com/containers/podman/issues/17349
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
copy the current mapping into a new user namespace, and run into a
separate user namespace.
Closes: https://github.com/containers/podman/issues/17337
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When multiple files are specified buildah considers `FROM` instruction
from the last file specified and so does `buildkit` and `docker` so lets
specify that in docs.
[NO NEW TESTS NEEDED]
[NO TESTS NEEDED]
Similar to: https://github.com/containers/buildah/pull/4546
Signed-off-by: Aditya R <arajan@redhat.com>
issues.redhat.com/browse/RHELBU-1918 is mentioning the podman-events man
page which are lacking notes on the verbose create events added by
commit 71f92d263c.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
(podman push) and (podman manifest push) now support --sign-by-sigstore=param-file,
using the containers-sigstore-signing-params.yaml(5) file format.
That notably adds support for Fulcio and Rekor signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
We had a number of references, mostly in docs, to the word master that
can now be changed to main. This PR does that and makes the project a
bit more inclusive.
[NO NEW TESTS NEEDED]
Signed-off-by: tomsweeneyredhat <tsweeney@redhat.com>
The Device, Type, Copy and Options keys are now supported in
quadlet .volume files. This allows users to create filesystem
based volumes with quadlets .volume files.
Signed-off-by: Ingo Becker <ingo@orgizm.net>
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Where the terms CNI and cni are used in documentation like man pages,
readme's, and tutorials, we have begun to add deprecation notices where
applicable. In cases where netavark cannot do what CNI can, those have
been left alone.
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Reserved annotations are used internally by Podman and would effect
nothing when run with Kubernetes so we should not be generating these
annotations.
Fixes: https://github.com/containers/podman/issues/17105
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Users need to know about this side effect.
Fixes: 5a2405ae1b ("Don't mount /dev/tty* inside privileged...")
Fixes: f4c81b0aa5 ("Only prevent VTs to be mounted inside ...")
Signed-off-by: Martin Roukala (né Peres) <martin.roukala@mupuf.org>
Move the handling of Publish key to a method
use --publish instead of -p
Use the new method for both .container and .kube files
Adjust .container tests
Add .kube tests
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add a new flag --publish
Remote - Pass PublishPorts as a string array
ABI - translate the string array to Ports and merge with the ports in the spec
Add e2e tests
Add option to man doc
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
The man-page cross-reference script checks the SEE ALSO section
to confirm that all references are to existing man pages (#12258).
However, it's a little too forgiving: it allows aliases, the
short '.so' files under the 'links/' subdirectory. That means
we could link to non-default command names, and were doing so.
As of this PR, we no longer allow that. Any podman command
referenced in SEE ALSO must be the canonical command name
(and man page). Fix existing non-canonical names, and
remove the exception so we don't allow this again.
See #16848 for discussion of context.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the new keys to the supported keys list for the Container group
Pass the list of EnvironmentFile values while maintaining the order
Quadlet e2e test framework: Add support for checking regex in Podman args
Add relevant tests
Update man
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Added the functionality for a user to update the PIDs limit for a
container.
Fixes: #16543
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Ygal Blum
tomsweeneyredhat
Alex Willmer
OpenShift Merge Robot
Daniel J Walsh
Marek Czernek
Toshiki Sonoda
Valentin Rothberg
restitux
Urvashi Mohnani
vyasgun
Matt Heon
T K Chandra Hasan
Rahil Bhimjiani
Ed Santiago
Giuseppe Scrivano
Ashley Cui
danishprakash
Erik Sjölund
salevdns
Claudio Nave
Timothée Ravier
Aditya R
Miloslav Trmač
Daniel Lublin
Ingo Becker
Martin Jackson
Brent Baude
Martin Roukala (né Peres)
Jake Correnti