added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when creating a pod with --infra-image and using a untagged image for
the infra-image (none/none), the lookup for the image's name was
creating a panic.
Fixes: #9374
Signed-off-by: baude <bbaude@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes#9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The `--network` flag is parsed differently for `podman pod create`.
This causes confusion and problems for users. The extra parsing
logic ignored unsupported network options such as `none`,
`container:...` and `ns:...` and instead interpreted them as cni
network names.
Tests are added to ensure the correct errors are shown.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
As described in issue #8507 this commit contains a breaking
change which is not wanted in v2.2.
We can discuss later if we want this in 3.0 or not.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We allow a container to be connected to several cni networks
but only if they are listed comma sperated. This is not intuitive
for users especially since the flag parsing allows multiple string
flags but only would take the last value. see: spf13/pflag#72
Also get rid of the extra parsing logic for pods. The invalid options
are already handled by `pkg/specgen`.
A test is added to prevent a future regression.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Followon to #7965 (mirror registry). mirror.gcr.io doesn't
cache all the images we need, and I can't find a way to
add to its cache, so let's just use quay.io for those
images that it can't serve.
Tools used:
skopeo copy --all docker://docker.io/library/alpine:3.10.2 \
docker://quay.io/libpod/alpine:3.10.2
...and also:
docker.io/library/alpine:3.2
docker.io/library/busybox:latest
docker.io/library/busybox:glibc
docker.io/library/busybox:1.30.1
docker.io/library/redis:alpine
docker.io/libpod/alpine-with-bogus-seccomp:label
docker.io/libpod/alpine-with-seccomp:label
docker.io/libpod/alpine_healthcheck:latest
docker.io/libpod/badhealthcheck:latest
Since most of those were new quay.io/libpod images, they required
going in through the quay.io GUI, image, settings, Make Public.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make a distinction between pods that are completely running (all
containers running) and those that have some containers going,
but not all, by introducing an intermediate state between Stopped
and Running called Degraded. A Degraded pod has at least one, but
not all, containers running; a Running pod has all containers
running.
First step to a solution for #7213.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When a container either joins a pod that shares the network
namespace or uses `--net=container:` to share the network
namespace of another container, it does not have its own copy of
the CNI results used to generate `podman inspect` output. As
such, to inspect these containers, we should be going to the
container we share the namespace with for network info.
Fixes#8073
Signed-off-by: Matthew Heon <mheon@redhat.com>
Remove ones that are not needed.
Document those that should be there.
Document those that should be fixed.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently infr-command and --infra-image commands are ignored
from the user. This PR instruments them and adds tests for
each combination.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
One of the --iidfile tests was flaking:
Error: failed to write image ID to file "/tmp/dir/idFile": open /tmp/dir/idFile: no such file or directory
Root cause: test was actually not mkdir'ing /tmp/dir. Test was
mostly passing because _other_ tests in the suite were mkdir'ing
it, but once in a while this test ran before the others.
Solution: fixed this test to use CreateTempDirInTempDir(). And,
since hardcoded tempdirs are bad practice, grepped for '"dir"'
and fixed all other instances too.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When creating a pod or container where a static MAC or IP address is provided, we should return a proper error and exit as 125.
Fixes: #6972
Signed-off-by: Brent Baude <bbaude@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `--replace` flag to the `pod create` command. If another pod with
the same name already exists, it will be replaced and removed.
Adding this flag is motivated by #5485 to make running Podman in systemd
units (or any other scripts/automation) more robust. In case of a
crash, a pod may not be removed by a sytemd unit anymore. The
`--replace` flag allows for supporting crashes.
Note that the `--replace` flag does not require the `--name` flag to be
set, so it can be set unconditionally in `podman generate systemd`.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Enables most of the network-related functionality from
`podman run` in `podman pod create`. Custom CNI networks can be
specified, host networking is supported, DNS options can be
configured.
Also enables host networking in `podman play kube`.
Fixes#2808Fixes#3837Fixes#4432Fixes#4718Fixes#4770
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Some callers assume when SystemExec returns, the command has completed.
Other callers explicitly wait for completion (as required). However,
forgetting to do that is an incredibly easy mistake to make. Fix this
by adding an explicit parameter to the function. This requires
every caller to deliberately state whether or not a completion-check
is required.
Also address **many** resource naming / cleanup completion-races.
Signed-off-by: Chris Evich <cevich@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
we need to allow users to expose ports to the host for the purposes
of networking, like a webserver. the port exposure must be done at
the time the pod is created.
strictly speaking, the port exposure occurs on the infra container.
Signed-off-by: baude <bbaude@redhat.com>
A pause container is added to the pod if the user opts in. The default pause image and command can be overridden. Pause containers are ignored in ps unless the -a option is present. Pod inspect and pod ps show shared namespaces and pause container. A pause container can't be removed with podman rm, and a pod can be removed if it only has a pause container.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Because our tests are getting so long, we want to be able to audit which tests are taking
the longest to complete. This may indicate a bad test, bad CI, bad code, etc and therefore
should be auditable.
Also, make speed improvements to tests by making sure we only unpack caches images that
actually get used.
Signed-off-by: baude <bbaude@redhat.com>
Closes: #1178
Approved by: mheon
OpenShift Merge Robot
cdoern
Ed Santiago
cdoern
Valentin Rothberg
baude
Jhon Honce
Matthew Heon
Paul Holzinger
Luap99
Matthew Heon
Ashley Cui
Daniel J Walsh
zhangguanzhang
Sujil02
Giuseppe Scrivano
Chris Evich
Yiqiao Pu
haircommander