Volumes endpoints for HTTP compat and libpod APIs allowed
usage of list HTTP endpoint filter funcs. Documentation in
case of compat API does not allow that. This commit aligns
code with the documentation and also ligns libpod with compat API.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Changed reference in swagger to correct struture that was being
returned.
* Added summary to ManifestAddLibpod to clean up generated web site
* Added serve target to Makefile, to aid in debugging generated
web site
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The problem described in #9711 and followed by #9758 affects
containers as well. When user provides wrong filter input, error
message should occur, not fallback to full list/prune command.
This change fixes the issue. Additionally, there are error message
fixes for docker http api compat.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
* Remove orphaned code
* Add meaningful error from LoadImageFromSingleImageArchive() when
heuristic fails to determine payload format
* Correct swagger to output correct types and headers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
This is the continuation work started in #9711. It turns out
that list/prune commands for volumes in libpod/compat api have
very dangerous error handling when broken filter input is supplied.
Problem also affects network list/prune in libpod. This commit
unifies filter handling across libpod/compat api and adds sanity
apiv2 testcases.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
Remove the file since it only contains dead code. The archive endpoints
are shared between the libpod and the compat API and both use the compat
package.
[NO TESTS NEEDED] since we're removing dead code.
Fixes: #9670
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
add the ability to prune unused cni networks. filters are not implemented
but included both compat and podman api endpoints.
Fixes :#8673
Signed-off-by: baude <bbaude@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
implement remote API for --all and --ignore flags for podman stop
implement remote API for --all flags for podman stop
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
Cleanup and pass proper bindings. Remove cli options from
podman-remote push. Cleanup manifest push.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixup the bindings and the handling of the --external --por and --sort
flags.
The --storage option was renamed --external, make sure we use
external up and down the stack.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman-remote search had some FIXMEs in tests that were failing.
So I reworked the search handler to use the local abi. This
means the podman search and podman-remote search will use the
same functions.
While doing this, I noticed we were just outputing errors via
logrus.Error rather then returning them, which works ok for
podman but the messages get lost on podman-remote. Changed
the code to actually return the error messages to the caller.
This allows us to turn on the remaining podman-remote FIXME
tests.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When doing a podman images, manifests lists look just like images, so
it is logical that users would assume that they can just podman push them
to a registry. The problem is we throw out weird errors when this happens
and users need to somehow figure out this is a manifest list rather then
an image, and frankly the user will not understand the difference.
This PR will make podman push just do the right thing, by failing over and
attempting to push the manifest if it fails to push the image.
Fix up handling of manifest push
Protocol should bring back a digest string, which can either be
printed or stored in a file.
We should not reimplement the manifest push setup code in the tunnel
code but take advantage of the api path, to make sure remote and local
work the same way.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Docker does not support this, and it is confusing what to do if
the image has more then one tag. We are dropping support for this
in podman 3.0
Fixes: https://github.com/containers/podman/issues/7387
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
`staticcheck` is a golang code analysis tool. https://staticcheck.io/
This commit fixes a lot of problems found in our code. Common problems are:
- unnecessary use of fmt.Sprintf
- duplicated imports with different names
- unnecessary check that a key exists before a delete call
There are still a lot of reported problems in the test files but I have
not looked at those.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* Restore correct API endpoint payloads including reclaimed space numbers
* Include tests for API prune endpoints
* Clean up function signatures with unused parameters
* Update swagger for /networks/prune
Fixes#8891
Signed-off-by: Jhon Honce <jhonce@redhat.com>
When migrating a container with associated volumes, the content of
these volumes should be made available on the destination machine.
This patch enables container checkpoint/restore with named volumes
by including the content of volumes in checkpoint file. On restore,
volumes associated with container are created and their content is
restored.
The --ignore-volumes option is introduced to disable this feature.
Example:
# podman container checkpoint --export checkpoint.tar.gz <container>
The content of all volumes associated with the container are included
in `checkpoint.tar.gz`
# podman container checkpoint --export checkpoint.tar.gz --ignore-volumes <container>
The content of volumes is not included in `checkpoint.tar.gz`. This is
useful, for example, when the checkpoint/restore is performed on the
same machine.
# podman container restore --import checkpoint.tar.gz
The associated volumes will be created and their content will be
restored. Podman will exit with an error if volumes with the same
name already exist on the system or the content of volumes is not
included in checkpoint.tar.gz
# podman container restore --ignore-volumes --import checkpoint.tar.gz
Volumes associated with container must already exist. Podman will not
create them or restore their content.
Signed-off-by: Radostin Stoyanov <rstoyanov@fedoraproject.org>
Fix a race condition in the pull endpoint caused by buffered channels.
Using buffered channels can lead to the context's cancel function to be
executed prior to the items being read from the channel.
Fixes: #8870
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This change adds code to report the reclaimed space after a prune.
Reclaimed space from volumes, images, and containers is recorded
during the prune call in a PruneReport struct. These structs are
collected into a slice during a system prune and processed afterwards
to calculate the total reclaimed space.
Closes#8658
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Begin the migration of the image bindings for podman 3.0. this includes
the use of options for each binding. build was intentionally not
converted as I believe it needs more discussion before migration.
specifically, the build options themselves.
also noteworthly is that the remove image and remove images bindings
were merged into one. the remove images (or batch remove) has one
downside in that the errors return no longer adhere to http return
codes. this should be discussed and reimplemented in subsequent code.
Signed-off-by: baude <bbaude@redhat.com>
This change adds support for the `--filter` / `?filters` arguments on
the `podman volume prune` subcommand.
* Adds ParseFilterArgumentsIntoFilters helper for consistent
Filter string slice handling
* Adds `--filter` support to podman volume prune cli
* Adds `?filters...` support to podman volume prune api
* Updates apiv2 / e2e tests
Closes#8672
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
The libpod images exists endpoint panics when called with
a non existing image and therefore returns 500 as status
code instead of the expected 404.
A test is added to ensure it is working.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
add the ability to add multiple containers into a single k8s pod
instead of just one.
also fixed some bugs in the resulting yaml where an empty service
description was being added on error causing the k8s validation to fail.
Signed-off-by: baude <bbaude@redhat.com>
Not pass the name argument to Load API. Specify in the document the usage of the optional argument is tagging an additional image.
Close#7337
Signed-off-by: Qi Wang <qiwan@redhat.com>
The goal is to improve errors when users use the wrong transport
in certain cases we stutter, in other cases we don't give enough
information.
Remove stutters when failing to pull remote images, because of
lack of support.
Fix errors returned by reference.Parse to wrap in image that was being
checked.
Fixes: https://github.com/containers/podman/issues/7116
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add label support for podman network create. Use the `args`
field in the cni config file to store the podman labels.
Use `podman_labels` as key name and store the labels as
map[string]string.
For reference: https://github.com/containernetworking/cni/blob/master/CONVENTIONS.md#args-in-network-confighttps://github.com/containernetworking/cni/blob/spec-v0.4.0/SPEC.md#network-configuration
Example snippet:
```
...
"args": {
"podman_labels": {
"key1":"value1",
"key2":"value2"
}
}
...
```
Make podman network list support several filters. Supported filters are name,
plugin, driver and label. Filters with different keys work exclusive. Several label
filters work exclusive and the other filter keys are working inclusive.
Also adjust the compat api to support labels in network create and list.
Breaking changes:
- podman network ls -f shortform is used for --filter instead --format
This matches docker and other podman commands (container ps, volume ps)
- libpod network list endpoint filter parameter is removed. Instead the
filters paramter should be used as json encoded map[string][]string.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
this enables the ability to connect and disconnect a container from a
given network. it is only for the compatibility layer. some code had to
be refactored to avoid circular imports.
additionally, tests are being deferred temporarily due to some
incompatibility/bug in either docker-py or our stack.
Signed-off-by: baude <bbaude@redhat.com>
Having play kube start the pod is not always appropriate, one might
for example like to have the pod running as a set of systemd services.
Add a `start` option to the command line and API to control if the pod
should be started or not; it defaults to true for backward
compatibility.
Signed-off-by: Alban Bedel <albeu@free.fr>
Recent changes in networking require that the cni network driver be set.
If the user provides no driver, we set the driver to the
defaultnetworkdriver which currently is "bridge".
Fixes: #8294
Signed-off-by: baude <bbaude@redhat.com>
If you use additional stores and pull the same image into
writable stores, you can end up with the situation where
you have the same image twice. This causes image exists
to return the wrong error. It should return true in this
situation rather then an error.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman inspect only had the capabilities to inspect containers and images. if a user wanted to inspect a pod, volume, or network, they would have to use `podman network inspect`, `podman pod inspect` etc. Docker's cli allowed users to inspect both volumes and networks using regular inspect, so this commit gives the user the functionality
If the inspect type is not specified using --type, the order of inspection is:
containers
images
volumes
networks
pods
meaning if container that has the same name as an image, podman inspect would return the container inspect.
To avoid duplicate code, podman network inspect and podman volume inspect now use the inspect package as well. Podman pod inspect does not because podman pod inspect returns a single json object while podman inspect can return multiple)
Signed-off-by: Ashley Cui <acui@redhat.com>
These options are now fully supported in the remote API and should no
longer be hidden and/or documented as non supported.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
External containers are containers created outside of Podman.
For example Buildah and CRI-O Containers.
$ buildah from alpine
alpine-working-container
$ buildah run alpine-working-container touch /test
$ podman container exists --external alpine-working-container
$ podman container diff alpine-working-container
C /etc
A /test
Added --external flag to refer to external containers, rather then --storage.
Added --external for podman container exists and modified podman ps to use
--external rather then --storage. It was felt that --storage would confuse
the user into thinking about changing the storage driver or options.
--storage is still supported through the use of aliases.
Finally podman contianer diff, does not require the --external flag, since it
there is little change of users making the mistake, and would just be a pain
for the user to remember the flag.
podman container exists --external is required because it could fool scripts
that rely on the existance of a Podman container, and there is a potential
for a partial deletion of a container, which could mess up existing users.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Current these commands only check if a container exists in libpod. With
this fix, the commands will also check if they are in containers/storage.
This allows users to look at differences within a buildah or CRI-O container.
Currently buildah diff does not exists, so this helps out in that situation
as well as in CRI-O since the cri does not implement a diff command.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Make Podman pod operations that do not involve starting
containers (which needs to be done in a specific order) use the
same parallel operation code we use to make `podman stop` on
large numbers of containers fast. We were previously stopping
containers in a pod serially, which could take up to the timeout
(default 15 seconds) for each container - stopping 100 containers
that do not respond to SIGTERM would take 25 minutes.
To do this, refactor the parallel operation code a bit to remove
its dependency on libpod (damn circular import restrictions...)
and use parallel functions that just re-use the standard
container API operations - maximizes code reuse (previously each
pod handler had a separate implementation of the container
function it performed).
This is a bit of a palate cleanser after fighting CI for two
days - nice to be able to return to a land of sanity.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This commit is courtesy of
```
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Error /\1"error /' $f;
done
for f in $(git ls-files *.go | grep -v ^vendor/); do \
sed -i 's/\(errors\..*\)"Failed to /\1"failed to /' $f;
done
```
etc.
Self-reviewed using `git diff --word-diff`, found no issues.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Fix the remote client to untag all tags of the specified image.
Instead of querying the image on the client side, support the
case where both, repo and tag, are empty and remove all tags.
Reuse the ABI implementation where possible. In retrospective,
the libpod untag endpoint should support a slice of strings to
batch remove tags rather than reaching out for each tag individually.
Enable the skipped test.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
In podman containers rm and podman images rm, the commands
exit with error code 1 if the object does not exists.
This PR implements similar functionality to volumes, networks, and Pods.
Similarly if volumes or Networks are in use by other containers, and return
exit code 2.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Refactor auth pkg to support X-Registry-Config
* Refactor build endpoint to support X-Registry-Config. Supports:
* --creds
* --authfile
* Added X-Reference-Id Header to http.Request to support log event
correlation
* Log headers from http.Request
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Have a clear separation of concerns for the CLI-only options (and their
logic) from the backend. The backend logic is now easier to understand
(e.g., `stream` instead of `noStream`).
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a new endpoint for container stats allowing for batch operations on
more than one container. The new endpoint deprecates the
single-container endpoint which will eventually be removed with the next
major release.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
id is the last image id from the set of id's returned via the images
stanza.
id may be deprecated in a future version of the API
Created test_rest_v2_0_0.py to reflect the bump in the API Version.
Fixes#7686
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman and podman-remote do not exactly match as the lower layer code
checks if the output is destined for a TTY before creating the progress
bars. A future PR for containers/images could change this behavior.
Fixes#7543
Tested with:
$ (echo '# start'; podman-remote pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
$ (echo '# start'; podman pull nginx ) 2>&1 | ts '[%Y-%m-%d %H:%M:%.S]'
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Enables podman create, pull, run, import to use --signature-policy option. Set it as hidden flag to be consistent with other commands.
Signed-off-by: Qi Wang <qiwan@redhat.com>
Support loading and saving tarballs with more than one image.
Add a new `/libpod/images/export` endpoint to the rest API to
allow for exporting/saving multiple images into an archive.
Note that a non-release version of containers/image is vendored.
A release version must be vendored before cutting a new Podman
release. We force the containers/image version via a replace in
the go.mod file; this way go won't try to match the versions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add the filter option to the libpod endpoint.
Add support for the name filter on the docker endpoint.
Add apiv2 tests for the network list endpoints.
Enable podman network integration tests for remote.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add support for generating systemd units
via the api and podman-remote.
Change the GenerateSystemdReport type to return the
units as map[string]string with the unit name as key.
Add `--format` flag to `podman generate systemd`
to allow the output to be formatted as json.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The APIv2 pod endpoints that operate on multiple containers, such
as Start, Kill, Pause, Unpause, do not report errors encountered
by individual containers, because they incorrectly assume that
any error is fatal. The documentation for the Libpod API calls
notes, however, that ErrPodPartialFail will *always* be returned
if any container failed; so we need to ignore that error and
continue to collating and returning container errors.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This should help alleviate races where the pod is not fully
cleaned up before subsequent API calls happen.
Signed-off-by: Matthew Heon <mheon@redhat.com>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
`podman image search` returned wrong results for the image "Description" as
it was mapped to the wrong field ("ID") in the search results.
Basically cherry-picked into the api from
commit cf5c63b5c4.
Signed-off-by: Ralf Haferkamp <rhafer@suse.com>
Currently you can only specify multiple character for image names
when executing podman-remote commit
podman-remote commit a b
Will complete, but will save the image without a name.
podman-remote commit a bb
Works.
This PR fixes and now returns an error if the user doees not specify an
image name to commit to.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
In the API, we are currently returning the image time of creation
as a string, in time.Time format. The API is for a 64 bit integer
representing Unix time.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
move the chown for newly created volumes after the spec generation so
the correct UID/GID are known.
Closes: https://github.com/containers/libpod/issues/5698
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The swagdoc in `register_volumes.go` already correctly notes that a 201
should be returned upon success, so we only need to change the handler
to match the spec.
Signed-off-by: Matt Brindley <58414429+maybe-sybr@users.noreply.github.com>
Support both `last` and `limit` for in the containers listing endpoint.
We intended to use `limit` which is also mentioned in the docs, but the
implementation ended up using `last` as the http parameter; likely being
caused by the CLI using `--last`. To avoid any regression, we decided
for supporting both and aliasing `last`.
Fixes: #6413
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of APIv2 Attach, we need to be able to attach to freshly
created containers (in ContainerStateConfigured). This isn't
something Libpod is interested in supporting, so we use Init() to
get the container into ContainerStateCreated, in which attach is
possible. Problem: Init() will fail if dependencies are not
started, so a fresh container in a fresh pod will fail. The
simplest solution is to extend the existing recursive start code
from Start() to Init(), allowing dependency containers to be
started when we initialize the container (optionally, controlled
via bool).
Also, update some comments in container_api.go to make it more
clear how some of our major API calls work.
Fixes#6646
Signed-off-by: Matthew Heon <mheon@redhat.com>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This fixes an error in the system tests, which expect that when
you try and kill a nonexistent pod with an incorrect signal, you
receive an error about the signal, not the pod.
At the same time, fix a missing return statement in the bindings,
which could also have caused us grief.
Fixes#6540
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In cases of trying to export an image, if the image was not found, we leaked an empty tarball or directory depending on the format.
Fixes: #6409
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add copy endpoint inputs and outputs. these endpoints are not implemented yet, nor are any bindings. this allows us to update this later without having to change our api version.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This should complete Podmanv2's support for volume-related flags.
Most code was sourced from the old pkg/spec implementation with
modifications to account for the split between frontend flags
(volume, mount, tmpfs) and the backend flags implemented here.
Also enables tests for podman run with volumes
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement pod stats for the local and remote client. Both code paths end
up in infra/abi to allow for code share.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Register system prune route, handler to support system prune,
Adds testcase to validate the system prune flow.
Signed-off-by: Sujil02 <sushah@redhat.com>
The length and size of our error messages on failure to pull
is huge. This patch at least eliminates some of the wrapping.
But I think eventually we need to look at containers/image
and see if we can modify the error messages to something a little
more human friendly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
While this commit was initially meant to fix#5847, it has turned into a
bigger refactoring which I did not manage to break into smaller pieces:
* Fix#5847 by refactoring the image-removal logic.
* Make the api handler for image-removal use the ABI code. This way,
both (i.e., ABI and Tunnel) end up using the same code. Achieving
this code share required to move some code around to prevent circular
dependencies.
* Everything in pkg/api (excluding pkg/api/types) must now only be
accessed from code using `ABISupport`.
* Avoid imports from entities on handlers to prevent circular
dependencies.
* Move `podman system service` logic into `cmd` to prevent circular
dependencies - it depends on pkg/api.
* Also remove the build header from infra/abi files. It will otherwise
confuse swagger and other tools; errors we cannot fix as go doesn't
expose a build-tag env variable.
Fixes: #5847
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add the ability to prune pods for api v2,
Includes the addition of force flag, for client side prompt.
Update test suite to support this use case.
Signed-off-by: Sujil02 <sushah@redhat.com>
this is second phase of removing unneeded bloat in the remote client. this is important to be able to reduce the client size as well as possible native compilation for windows/mac.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Also implement a new libpod endpoint to add more parameters and to
prevent us from converting between slices and maps and make use of
the filter parsing in the image backend.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
create a container in podmanv2 using specgen approach. this is the core implementation and still has quite a bit of code commented out specifically around volumes, devices, and namespaces. need contributions from smes on these parts.
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Implement `podman-push` and `podman-image-push` for the podmanV2
client.
* Tests for `pkg/bindings` are not possible at the time of writing as we
don't have a local registry running.
* Implement `/images/{name}/push` compat endpoint. Tests are not
implemented for this v2 endpoint. It has been tested manually.
General note: The auth config extraction from the http header is not
implement for push. Since it's not yet supported for other endpoints
either, I deferred it to future work.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement pulling images for the v2 client. What I _really_ don't like
is the fact that we are now having a near identical code clone among
`pkg/domain/infra/abi` and `pkg/api/handlers/libpod`. Partly because we
don't yet have a higher-level pull function and partly because we have
redudancy among `pkg/domain` and `pkg/api`. Pull might be a high
outlier but I am concerned already by the potential of introducing more
redundancy. I'd love to `infra/abi` and `pkg/abi` to really use the
same code in the future.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Note that this commit does not add tests for the pod-top endpoint.
They will be added in a later change.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
using the factory approach similar to container, we now create pods based on a pod spec generator. wired up the podmanv2 pod create command, podcreatewithspec binding, simple binding test, and apiv2 endpoint.
also included some code refactoring as it introduced as easy circular import.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add an endpoint for a libpod specific commit. add the abilility to define the format. also update documentation accordingly.
Fixes: #5586
Signed-off-by: Brent Baude <bbaude@redhat.com>
Refactored current filter pods flow through the shared pod functions
so filter pod functionalities can be shared between api and cmd.
Signed-off-by: Sujil02 <sushah@redhat.com>
add endpoints for create, add, remove, inspect, and push. this allows manifests to be managed through the restful interfaces.
also added go-bindings and tests
Signed-off-by: Brent Baude <bbaude@redhat.com>
reworking binding and endpoint to actually work. added documentation in swagger for and various return code possibilities. add a good start on tests though we need some other container functions not yet implemented for that.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Update the strat and stop api to validate pod status based on status functions
rather than iterating over all the containers in the pod. (Addressing the TO-DO)
Signed-off-by: Sujil02 <sushah@redhat.com>
added the ability to wait on a condition (stopped, running, paused...) for a container. if a condition is not provided, wait will default to the stopped condition which uses the original wait code paths. if the condition is stopped, the container exit code will be returned.
also, correct a mux issue we discovered.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add binding tests for volumes: inspect(get), create, remove, prune, and list
implement filters ability for volumes
Signed-off-by: Brent Baude <bbaude@redhat.com>
adding more image tests for go bindings. one big change is that the params were converted from map[string]string to url.values to account for the ability to send []string as query params
Signed-off-by: Brent Baude <bbaude@redhat.com>
this uses the specgen structure to create containers rather than the outdated createconfig. right now, only the apiv2 create is wired up. eventually the cli will also have to be done.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Include test to validate pod create, start, stop, restart,
pause, unpause, list, and inspect api bindings.
Also includes bug fixes that resulted in invalid api responses.
Signed-off-by: Sujil02 <sushah@redhat.com>
We attempted to share all logic for parsing labels and
environment variables, which on the surface makes lots of sense
(both are formatted key=value so parsing logic should be
identical) but has begun to fall apart now that we have added
additional logic to environment variable handling. Environment
variables that are unset, for example, are looked up against
environment variables set for the process. We don't want this for
labels, so we have to split parsing logic.
Fixes#3854
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when filtering containers, if a status= is provided as an input filter, then we should override the all to always be true.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Even after #5169, my test logs kept showing:
ERRO[0004] unable to write json: "http: request method or response status code does not allow body"
Cause: overly-helpful code trying to treat condition as an
error and include a diagnostic message. This is forbidden
per rfc2616.
This PR fixes the faulty response, as well as three others
found via:
$ ack 'Error.*NotMod' (4 hits total)
$ ack 'Error.*NoCont' (no hits)
Signed-off-by: Ed Santiago <santiago@redhat.com>
container filters were being double encoded (maybe triple) which resulted in the wrong encoding representation of filters being sent by the go-bindings. Also, on the server side, Filter needed to be changed to Filter to decode properly. Finally, due to the changed return type of List Containers, the go bindings return values needed to be changed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
1) /pods/<X>/exists - is documented to return 204, and that's
the correct value, but until now it has been returning 200.
2) /pods/create - return 409 (conflict), not 500, when pod
already exists
Also: in WriteResponse(), if code is 204 (No Content) or 304
(Not Modified), emit the status code only but no content-type
headers nor content.
Signed-off-by: Ed Santiago <santiago@redhat.com>
consumers of the api remarked how they would prefer a more strongly typed data structure from list containers oon the libpod side of things. for example, events should be consumable and consistent timestamps. also, for the sake of compatibility, it is helpful to have the json named atttributes for Id to not be ID.
listcontainers on the libpod side no longer strongly uses the the ps cli to obtain information but we do benefit from turning on the ability to list the last X containers, something CLI does not have yet. we also flipped the bit on defaulting to truncated output in the return.
thanks to the efforts of the cockpit team to help us here.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Implement the /libpod/images/pull endpoint and correct the swagger docs.
The reference parameter is mandatory and must either be a
c/image/docker/reference or a reference to the "docker://" transport as
the pull endpoint is meant to only support pulling images from a
registry.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Note: this commit is merely adding swagger documentation and the golang
stubs and types for the proposed endpoints. The implementation will
follow in separate individual changes in the future.
The ultimate goal is to prevent the libpod API from exposing the rather
complex /images/create endpoint from Docker and split it into easier to
implement, use and comprehend endpoints with a more narrow focus.
# Import
Add the v2 swagger documentation for the libpod/images/import endpoint.
Note that we have intend to have separate backend and not mix it up with
load since import allows for specifying a URL instead of a local
tarball.
# Load
Complete the v2 swagger documentation for the libpod/images/load
endpoint. Note that we are accounting for future plans to be able to
load multiple images from one oci/docker archive by returning an array
of image-load responses.
Also move the (incomplete) implementation of the generic endpoint to the
corresponding package and create a stub for the libpod handler, which
will be implemented once there's an agreement on the proposed API.
# Pull
Add the v2 swagger documentation for the libpod/images/pull endpoint.
Similar to the load endpoint, we return an array since more than one
image can be pulled when the `all-tags` parameter is set.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add converter for URL query parameters of type map[string][]string
* Add converter for URL query parameters of type time.Time
* Added function to allocate and configure schema.Decoder for API use
* Updated API handlers to leverage new converters, and correct handler
code for filter type
An encoding example for a client using filters:
v := map[string][]string{
"dangling": {"true"},
}
payload, err := jsoniter.MarshalToString(v)
if err != nil {
panic(err)
}
payload = "?filters=" + url.QueryEscape(payload)
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add API review comments to correct documentation and endpoints. Also, add a libpode prune method to reduce code duplication. Only used right now for the API but when the remote client is wired, we will switch over there too.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add a static tags file so we can dictate the left-hand navigation. in
doing so we now override the tag in the swagger:operation. we now have
images and images (compat) as a way to differentiate.
Signed-off-by: baude <bbaude@redhat.com>
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Create service command
Use cd cmd/service && go build .
$ systemd-socket-activate -l 8081 cmd/service/service &
$ curl http://localhost:8081/v1.24/images/json
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Correct Makefile
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Two more stragglers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Report errors back as http headers
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Split out handlers, updated output
Output aligned to docker structures
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Refactored routing, added more endpoints and types
* Encapsulated all the routing information in the handler_* files.
* Added more serviceapi/types, including podman additions. See Info
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Cleaned up code, implemented info content
* Move Content-Type check into serviceHandler
* Custom 404 handler showing the url, mostly for debugging
* Refactored images: better method names and explicit http codes
* Added content to /info
* Added podman fields to Info struct
* Added Container struct
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add a bunch of endpoints
containers: stop, pause, unpause, wait, rm
images: tag, rmi, create (pull only)
Signed-off-by: baude <bbaude@redhat.com>
Add even more handlers
* Add serviceapi/Error() to improve error handling
* Better support for API return payloads
* Renamed unimplemented to unsupported these are generic endpoints
we don't intend to ever support. Swarm broken out since it uses
different HTTP codes to signal that the node is not in a swarm.
* Added more types
* API Version broken out so it can be validated in the future
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Refactor to introduce ServiceWriter
Signed-off-by: Jhon Honce <jhonce@redhat.com>
populate pods endpoints
/libpod/pods/..
exists, kill, pause, prune, restart, remove, start, stop, unpause
Signed-off-by: baude <bbaude@redhat.com>
Add components to Version, fix Error body
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add images pull output, fix swarm routes
* docker-py tests/integration/api_client_test.py pass 100%
* docker-py tests/integration/api_image_test.py pass 4/16
+ Test failures include services podman does not support
Signed-off-by: Jhon Honce <jhonce@redhat.com>
pods endpoint submission 2
add create and others; only top and stats is left.
Signed-off-by: baude <bbaude@redhat.com>
Update pull image to work from empty registry
Signed-off-by: Jhon Honce <jhonce@redhat.com>
pod create and container create
first pass at pod and container create. the container create does not
quite work yet but it is very close. pod create needs a partial
rewrite. also broken off the DELETE (rm/rmi) to specific handler funcs.
Signed-off-by: baude <bbaude@redhat.com>
Add docker-py demos, GET .../containers/json
* Update serviceapi/types to reflect libpod not podman
* Refactored removeImage() to provide non-streaming return
Signed-off-by: Jhon Honce <jhonce@redhat.com>
create container part2
finished minimal config needed for create container. started demo.py
for upcoming talk
Signed-off-by: baude <bbaude@redhat.com>
Stop server after honoring request
* Remove casting for method calls
* Improve WriteResponse()
* Update Container API type to match docker API
Signed-off-by: Jhon Honce <jhonce@redhat.com>
fix namespace assumptions
cleaned up namespace issues with libpod.
Signed-off-by: baude <bbaude@redhat.com>
wip
Signed-off-by: baude <bbaude@redhat.com>
Add sliding window when shutting down server
* Added a Timeout rather than closing down service on each call
* Added gorilla/schema dependency for Decode'ing query parameters
* Improved error handling
* Container logs returned and multiplexed for stdout and stderr
* .../containers/{name}/logs?stdout=True&stderr=True
* Container stats
* .../containers/{name}/stats
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Improve error handling
* Add check for at least one std stream required for /containers/{id}/logs
* Add check for state in /containers/{id}/top
* Fill in more fields for /info
* Fixed error checking in service start code
Signed-off-by: Jhon Honce <jhonce@redhat.com>
get rest of image tests for pass
Signed-off-by: baude <bbaude@redhat.com>
linting our content
Signed-off-by: baude <bbaude@redhat.com>
more linting
Signed-off-by: baude <bbaude@redhat.com>
more linting
Signed-off-by: baude <bbaude@redhat.com>
pruning
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]apiv2 pods
migrate from using args in the url to using a json struct in body for
pod create.
Signed-off-by: baude <bbaude@redhat.com>
fix handler_images prune
prune's api changed slightly to deal with filters.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]enabled base container create tests
enabling the base container create tests which allow us to get more into
the stop, kill, etc tests. many new tests now pass.
Signed-off-by: baude <bbaude@redhat.com>
serviceapi errors: append error message to API message
I dearly hope this is not breaking any other tests but debugging
"Internal Server Error" is not helpful to any user. In case, it
breaks tests, we can rever the commit - that's why it's a small one.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
serviceAPI: add containers/prune endpoint
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add `service` make target
Also remove the non-functional sub-Makefile.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
add make targets for testing the service
* `sudo make run-service` for running the service.
* `DOCKERPY_TEST="tests/integration/api_container_test.py::ListContainersTest" \
make run-docker-py-tests`
for running a specific tests. Run all tests by leaving the env
variable empty.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Split handlers and server packages
The files were split to help contain bloat. The api/server package will
contain all code related to the functioning of the server while
api/handlers will have all the code related to implementing the end
points.
api/server/register_* will contain the methods for registering
endpoints. Additionally, they will have the comments for generating the
swagger spec file.
See api/handlers/version.go for a small example handler,
api/handlers/containers.go contains much more complex handlers.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[CI:DOCS]enabled more tests
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]libpod endpoints
small refactor for libpod inclusion and began adding endpoints.
Signed-off-by: baude <bbaude@redhat.com>
Implement /build and /events
* Include crypto libraries for future ssh work
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[CI:DOCS]more image implementations
convert from using for to query structs among other changes including
new endpoints.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add bindings for golang
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add volume endpoints for libpod
create, inspect, ls, prune, and rm
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]apiv2 healthcheck enablement
wire up container healthchecks for the api.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]Add mount endpoints
via the api, allow ability to mount a container and list container
mounts.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]Add search endpoint
add search endpoint with golang bindings
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]more apiv2 development
misc population of methods, etc
Signed-off-by: baude <bbaude@redhat.com>
rebase cleanup and epoch reset
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add more network endpoints
also, add some initial error handling and convenience functions for
standard endpoints.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]use helper funcs for bindings
use the methods developed to make writing bindings less duplicative and
easier to use.
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]add return info for prereview
begin to add return info and status codes for errors so that we can
review the apiv2
Signed-off-by: baude <bbaude@redhat.com>
[CI:DOCS]first pass at adding swagger docs for api
Signed-off-by: baude <bbaude@redhat.com>
Jakub Guzik
Jhon Honce
OpenShift Merge Robot
Kellen Dunham
Valentin Rothberg
Milivoje Legenovic
Paul Holzinger
Ashley Cui
baude
Matej Vasek
Daniel J Walsh
Matthew Heon
Radostin Stoyanov
Baron Lenardson
Qi Wang
Alban Bedel
Andy Librian
Kir Kolyshkin
zhangguanzhang
Matthew Heon
Ralf Haferkamp
Giuseppe Scrivano
maybe-sybr
Sujil02
Sascha Grunert
Ed Santiago