Commit 1 of 2.
More easy ones: test files that either work with ExitCleanly()
or require very, very simple tweaks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
For tests that use '--ip XX', random IP allocation is not
working well. Switch instead to a deterministic algorithm
with CPU affinity and a fudge factor for CNI.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Directly writing to stdout/err is not safe when run in parallel.
Ginkgo v2 fixed this buffering the output and syncing the output so it
is not mangled between tests.
This means we should use the GinkgoWriter everywhere to make sure the
output stays in sync.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This is not safe at all when run in parallel, CNI needs that directory
to detect duplicated ips and also stores other important network info in
it. Removing it while container network is setup is not safe at all and
could cause a lot of weird flakes.
This "hack" was added in commit 55508c11 but provides zero context what
this was supposed to fix so I don't know what the actual issue is or was.
Fixes#18399
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
...at least as many as possible. "run/exec -it" make no sense
in a CI environment; I believe the vast majority of these are
the result of fingers typing on autopilot, then copy/pasting
cascades from those. This PR gets rid of as many -it/-ti as
possible. Some are still needed for testing purposes.
Y'all have no idea how much I hate #10927 (the "no logs from conmon"
flake). This does not fix the underlying problem, nor does it even
eliminate the flake (The "exec terminal doesn't hang" test needs
to keep the -ti flag, and that's one of the most popular flakers).
But this at least reduces the scope of the problem. It also removes
a ton of nasty orange "input device is not a TTY" warnings from logs.
Signed-off-by: Ed Santiago <santiago@redhat.com>
http.Get() could not recognize no_proxy with "ginkgo -nodes <any>".
Therefore, we set http.Client not to use a proxy instead of os.Setenv().
Fixes#17135
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
In view of https://github.com/containers/storage/pull/1337, do this:
for f in $(git grep -l stringid.GenerateNonCryptoID | grep -v '^vendor/'); do
sed -i 's/stringid.GenerateNonCryptoID/stringid.GenerateRandomID/g' $f;
done
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
`Podman run two containers with the same IP [It]`
This test will be failed in proxy environment.
We need to set the static ip to no_proxy.
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
A number of standard image names were lower-case, leading to
confusion in code such as:
registry := podman(... , "-n", "registry", registry, ...)
^--- variable ^---- constant
Fix a number of those to be capitalized and with _IMAGE suffix:
registry := podman(..., REGISTRY_IMAGE
Signed-off-by: Ed Santiago <santiago@redhat.com>
* Replace "setup", "lookup", "cleanup", "backup" with
"set up", "look up", "clean up", "back up"
when used as verbs. Replace also variations of those.
* Improve language in a few places.
Signed-off-by: Erik Sjölund <erik.sjolund@gmail.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
[skip ci]
While chasing a flake, I discovered that our alpine_nginx
image is broken: it returns 404 on all requests. We never
caught this because--surprise!--curl exits 0 even when
server returns 4xx/5xx status.
Let's be strict: add -f (--fail) option to all invocations
of curl.
And, although I couldn't identify the root cause of the
flake (in "run two containers with the same IP" test),
I can at least fix the broken wait-for-nginx loop, bump
up the number of retries, and improve diagnostics on
failure. And add a strict error-message check.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add the --ipv6 flag to podman create/run and pod create. We support the
--network name:ip6=<ip> syntax now but for docker compat we should also
support the --ip6 flag.
Note that there is no validation if the ip is actually a v6 or v4 address
because the backend does not care either.
Fixes#7511
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
instead of searching the fedora registry which is error prone, we instead search a local registry for the empty set search.
when running two containers with the same IP, i suspect the first container has not fully gotten its ip information back from cni when the second container fires. rework this test such that we use nginx to make sure the container is up and running before continues which should pace the subsequent test.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
The function to generate random IP addresses during ginkgo tests in
the checkpoint test code is moved to common and all tests using
hardcoded IP addresses have been changed to use random IP addresses to
reduce test errors when running the tests in parallel.
Signed-off-by: Adrian Reber <areber@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Ed Santiago
Paul Holzinger
OpenShift Merge Robot
Toshiki Sonoda
Kir Kolyshkin
Erik Sjölund
Brent Baude
Valentin Rothberg
Paul Holzinger
Daniel J Walsh
Jhon Honce
Adrian Reber
Giuseppe Scrivano
Yiqiao Pu
Matthew Heon