Commit 1 of 2.
More easy ones: test files that either work with ExitCleanly()
or require very, very simple tweaks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Adds support for `since` as a valid filter option for `podman volume ls`
and `podman volume prune`.
Implements: #19228
Initially suggested from: #19119
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Just like Cleanup() they should check the error codes.
While doing this it was clear that some volume tests were calling
Cleanup() twice so remove this.
Instead make sure they call Cleanup() themselves so callers only need to
do one call. This is required because we cannot use Expect().To() before
doing all the cleanup. An error causes panic does results in an early
return thus missing potentially important cleanup.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Adds two custom config dirs to tests that were missed in
commit dc9a65e348.
Fixes#17946 (hopefully finally)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The errcheck linter makes sure that errors are always check and not
ignored by accident. It spotted a lot of unchecked errors, mostly in the
tests but also some real problem in the code.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit follows work started in #10756. Changes made in #11015
enabled cli support for volume prune --filter until. Adding e2e test
closes#10579.
Signed-off-by: Jakub Guzik <jakubmguzik@gmail.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This change adds support for the `--filter` / `?filters` arguments on
the `podman volume prune` subcommand.
* Adds ParseFilterArgumentsIntoFilters helper for consistent
Filter string slice handling
* Adds `--filter` support to podman volume prune cli
* Adds `?filters...` support to podman volume prune api
* Updates apiv2 / e2e tests
Closes#8672
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Adds podman system prune for v2.
Refactoring for code reuse from pods containers images and volume prune.
Adds and enables testcases to support the added feature.
Signed-off-by: Sujil02 <sushah@redhat.com>
enabled integration tests for volumes. there are two exceptions that still need work because of something not yet implemented.
also, add code to deal with the fact that containers conf appears to set a local volume driver where it used to be simply blank.
Signed-off-by: Brent Baude <bbaude@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
We are missing the equivalence of the docker system commands
This patch set adds `podman system prune`
and `podman system info`
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
Ed Santiago
Jake Correnti
Paul Holzinger
vyasgun
Valentin Rothberg
Jakub Guzik
Baron Lenardson
Daniel J Walsh
Sujil02
Brent Baude
Qi Wang
Urvashi Mohnani