Add a new `--overwrite` flag to `podman cp` to allow for overwriting in
case existing users depend on the behavior; they will have a workaround.
By default, the flag is turned off to be compatible with Docker and to
have a more sane behavior.
Fixes: #14420
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
this patch included additonal host namespace checks when creating a ctr as well
as fixing of the tests to check /proc/self/ns/net
see #14461
Signed-off-by: cdoern <cdoern@redhat.com>
Previous PR #12394 tried to address this, but made a mistake:
containers that have just exited do not move to the Exited state
but rather the Stopped state - as such, the code would never have
run (there is no way we start `podman kill`, and the container
transitions to Exited while we are doing it - that requires
holding the container lock, which Kill already does).
Fix the code to check Stopped as well (we omit Exited entirely
but it's a cheap check and our state logic could change in the
future). Also, return an error, instead of exiting cleanly - the
Kill failed, after all. ErrCtrStateInvalid is already handled by
the sig-proxy logic so there won't be issues.
[NO NEW TESTS NEEDED] This fixes a race that I cannot reproduce
myself, and I have no idea how we'd repro in CI.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Podman and Buildah should use the same code the generate the resolv.conf
file. This mostly moved the podman code into c/common and created a
better API for it so buildah can use it as well.
[NO NEW TESTS NEEDED] All existing tests should continue to pass.
Fixes#13599 (There is no way to test this in CI without breaking the
hosts resolv.conf)
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container with a userns is created the network setup is special.
Normally the netns is setup before the oci runtime container is created,
however with a userns the container is created first and then the network
is setup. In the second case we never saved the container state
afterwards. Because of it, podman inspect would not show the network info
and network teardown will not happen.
This worked with local podman because there was a save() call later in the
code path which then also saved the network status. But in the podman API
code path this save never happened thus all containers started via API had
this problem.
Fixes#14465
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
make the error clearer and state that images created by other tools
might not be visible to Podman when it overrides the graph driver.
Closes: https://github.com/containers/podman/issues/13970
[NO NEW TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
If a privileged container is running, stops, and the devices on the host
change, such as a USB device is unplugged, then a container would no
longer start. Previously, the devices from the host were only being
added to the container once: when the container was created. Now, this
happens every time the container starts.
I did this by adding a boolean to the container config that indicates
whether to mount all of the devices or not, which can be set via an option.
During spec generation, if the `MountAllDevices` option is set in the
container config, all host devices are added to the container.
Additionally, a couple of functions from `pkg/specgen/generate/config_linux.go`
were moved into `pkg/util/utils_linux.go` as they were needed in
multiple packages.
Closes#13899
Signed-off-by: Jake Correnti <jcorrenti13@gmail.com>
Similar feature was added for named overlay volumes here: https://github.com/containers/podman/pull/12712
Following PR just mimics similar feature for anonymous volumes.
Often users want their anonymous overlayed volumes to be `non-volatile` in nature
that means that same `upper` dir can be re-used by one or more
containers but overall of nature of volumes still have to be overlay
so work done is still on a overlay not on the actual volume.
Following PR adds support for more advanced options i.e custom `workdir`
and `upperdir` for overlayed volumes. So that users can re-use `workdir`
and `upperdir` across new containers as well.
Usage
```console
podman run -it -v /some/path:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh
```
Signed-off-by: Aditya R <arajan@redhat.com>
Firstly, reset is now managed by the runtime itself as a part of
initialization. This ensures that it can be used even with
runtimes that would otherwise fail to be created - most notably,
when the user has changed a core path
(runroot/root/tmpdir/staticdir).
Secondly, we now attempt a best-effort removal even if the store
completely fails to be configured.
Third, we now hold the alive lock for the entire reset operation.
This ensures that no other Podman process can start while we are
running a system reset, and removes any possibility of a race
where a user tries to create containers or pull images while we
are trying to perform a reset.
[NO NEW TESTS NEEDED] we do not test reset last I checked.
Fixes#9075
Signed-off-by: Matthew Heon <mheon@redhat.com>
The backend should not convert partial lines to full log lines. While
this works for most cases it cannot work when the last line is partial
since it will just be lost. The frontend logic can already display
partial lines correctly. The journald driver also works correctly since
it does not such conversion.
Fixes#14458
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a container does not use the default podman netns, for example
--network none or --network ns:/path a restore would fail because the
specgen check validates that c.config.StaticMAC is nil but the
unmarshaller sets it to an empty slice.
While we could make the check use len() > 0 I feel like it is more
common to check with != nil for ip and mac addresses.
Adding omitempty tag makes the json marshal/unmarshal work correctly.
This should not cause any issues.
Fixes#14389
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Hardcoding the interface name is a bad idea. We have no control over the
actual interface name since the user can change it.
The correct thing is to read them from the network status. Since the
contianer can have more than one interface we have to add the RX/TX
values. The other values are currently not used.
For podman 5.0 we should change it so that the API can return the
statistics per interface and the client should sum the TX/RX for the
command output. This is what docker is doing.
Fixes#13824
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure to wait for the systemd operations to finish when
starting/stopping healtcheck timers and services. Also make
sure to stop the timer before the service to avoid a race
with the timer.
[NO NEW TESTS NEEDED] since it is a non-functional change and existing
tests are expected to pass.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Refactor populating uptime field to use standard library parsing and
math for populating the hour, minute, seconds fields.
Note: the go-humanize package does not cover time.Duration just
time.time.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
With conmon-rs on the horizon, we need to disentangle Libpod from
legacy Conmon to the greatest extent possible. There are
definitely opportunities for codesharing between the two, but we
have to assume the implementations will be largely disjoint given
the different architectures.
Fortunately, most of the work has already been done in the past.
The conmon-managed OCI runtime mostly sits behind an interface,
with a few exceptions - the most notable of those being attach.
This PR thus moves Attach behind the interface, to ensure that we
can have attach implementations that don't use our existing unix
socket streaming if necessary.
Still to-do is conmon cleanup. There's a lot of code that removes
Conmon-specific files, or kills the Conmon PID, and all of it
will need to be refactored behind the interface.
[NO NEW TESTS NEEDED] Just moving some things around.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The Authorization field lists the plugins for granting access to the
Docker daemon. This field will always be nil for Podman as there is no
daemon. The field is included for compatibility.
```release-note
NONE
```
[NO NEW TESTS NEEDED]
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Mostly, just removing the comments. These either have been done,
or are no longer a good idea.
No code changes. [NO NEW TESTS NEEDED] as such.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Most of these are no longer relevant, just drop the comments.
Most notable change: allow `podman kill` on paused containers.
Works just fine when I test it.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Simplify the work-queue implementation by using a wait group. Once all
queued work items are done, the channel can be closed.
The system tests revealed a flake (i.e., #14351) which indicated that
the service container does not always get stopped which suggests a race
condition when queuing items. Those items are queued in a goroutine to
prevent potential dead locks if the queue ever filled up too quickly.
The race condition in question is that if a work item queues another,
the goroutine for queuing may not be scheduled fast enough and the
runtime shuts down; it seems to happen fairly easily on the slow CI
machines. The wait group fixes this race and allows for simplifying
the code.
Also increase the queue's buffer size to 10 to make things slightly
faster.
[NO NEW TESTS NEEDED] as we are fixing a flake.
Fixes: #14351
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
Change the TODO note to NOTE to actually reflect what it is:
breadcrumbs in case we want to add filtering the future.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
For various (mostly legacy) reasons, Podman presently maintains a
unified namespace for pods and containers - IE, we cannot have
both a pod and a container named "test" at the same time. To
implement this, we use a global database table of every pod and
container ID (and another of every pod and container name).
These entries should be added when containers/pods are added, and
removed when containers/pods are removed, with the database's
transactional integrity providing a guarantee that this is
batched with the overall removal and that the DB should remain
sane and consistent no matter what. As such, we treat a dangling
ID as a hard error that stops the use of Podman.
Unfortunately, we have someone run into this last Friday. I'm
still not certain how exactly their DB got into this state, but
without further clarification there, we can consider removing the
error and making Podman instead clean up and remove any dangling
IDs, which should restore Podman to a serviceable state. Drop an
error message if we do this, though, because people should know
that the DB is in a bad state.
[NO NEW TESTS NEEDED] it is deliberately impossible to produce a
configuration that would test this without hex-editing the DB
file.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Create an auto-update event for each invocation, independent if images
and containers are updated or not. Those events will be indicated in
the events already but users will now know why.
Fixes: #14283
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The init binary until now has been bind-mounted to /dev/init which
breaks when bind-mounting to /dev. Instead mount the init to
/run/podman-init. The reasoning for using /run is that it is already
used for other runtime data such as secrets.
Fixes: #14251
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
The completion suggested incorrect values for `podman events --filter
type=` . It should only list types not the event status. Also make sure
to use the constants instead of duplicating the strings.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Valentin Rothberg
OpenShift Merge Robot
cdoern
Matthew Heon
Paul Holzinger
Giuseppe Scrivano
Jake Correnti
Aditya R
Jhon Honce
Matthew Heon
Jakob Ahrer
Daniel J Walsh
Jason T. Greene