* wire up bindings and handler for obtaining logs remotely
* enable debug logging from podman in e2e test using DEBUG and
DEBUG_SERVICE env variables
* Fix error in streaming log frames
* enable remote logs test
Signed-off-by: Jhon Honce <jhonce@redhat.com>
this is a very basic implementation of build. some of the more advanced options need to be included still as well. i think the endpoints for compat and libpod will have to split given buildahs more advanced set of options. that should probably be done by someone more experienced with build internals.
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Update blang/semver to allow ParseTolerant() support
* Provide helper functions for API handlers to obtain client's 'version'
path variable focused on API endpoint tree: libpod vs. compat
* Introduce new errors:
* version not given in path, endpoints may determine if this is a hard
error (ErrVersionNotGiven)
* given version not supported (ErrVersionNotSupported), only a soft
error if the handler is going to hijack the connection
* Added unit tests for version parsing
* bindings check version on connect:
* client <= Server API version connection is continued
* client >= Server API version connection fails
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when trying to get an image tree for a missing image, it should return a 404. doc fix only.
Fixes: #6289
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add support for /exec/{id}/resize
* Add support for ErrSessionNotFound
* Resize container TTY as stdin changes size
* Refactor all resize functions into one handler
Signed-off-by: Jhon Honce <jhonce@redhat.com>
the endpoint for single image removal (on the libpod side) should be as follows:
versionedPath/libpod/images/IMAGENAME
The DELETE method then signifies the removal of the image.
Fixes: #6261
Signed-off-by: Brent Baude <bbaude@redhat.com>
Jhon is working on an alternative version that will combine
container and exec session resize, so we'll wait for that.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
for the remote client, add the ability to attach to a container, start a container, and run a container.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Most importantly, note the pruning behavior of compat Inspect.
Less importantly, note that the Tty parameter to Start is only
ignored, as opposed to being not supported.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The usual flow for exec is going to be:
- Create exec session
- Start and attach to exec session
- Exec session exits, attach session terminates
- Client does an exec inspect to pick up exit code
The safest point to remove the exec session, without doing any
database changes to track stale sessions, is to remove during the
last part of this - the single inspect after the exec session
exits.
This is definitely different from Docker (which would retain the
exec session for up to 10 minutes after it exits, where we will
immediately discard) but should be close enough to be not
noticeable in regular usage.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is still very early not not well tested, and missing resize
capability, but it does provide the first bits of exec.
Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add ErrLostSync to report lost of sync when de-mux'ing stream
* Add logus.SetLevel(logrus.DebugLevel) when `go test -v` given
* Add context to debugging messages
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Adds tunnel routes for system reset.
Makes forces flag local as options are not propogated down the stack.
Adds relevant test cases and swagger docs.
Signed-off-by: Sujil02 <sushah@redhat.com>
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Continue the refactoring of image removal. I didn't manage to break all
the following changes into smaller and easier to digest commits due to
time constraints:
* Return an error slice instead of a single error. Use multierror only
in the client/frontend. Reflect that in the types.
* Use the batch image removal in the client while preserving the more
rest-idiomatic single-image removal endpoint.
* Add a new handler for the single-image removal endpoint to make it
share the same code as the batch endpoint.
* Expose bindings for the single and batch endpoints, so we can
properly test them.
* Add several convenience functions for error handling to
pkg/errorhandling.
* Set the correct error type in libpod to set the exit code to 2 when
one or more containers are using an image.
* Massage the bindings tests a bit and tackle compilation errors.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This should complete Podmanv2's support for volume-related flags.
Most code was sourced from the old pkg/spec implementation with
modifications to account for the split between frontend flags
(volume, mount, tmpfs) and the backend flags implemented here.
Also enables tests for podman run with volumes
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement pod stats for the local and remote client. Both code paths end
up in infra/abi to allow for code share.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Enable pod inspect integration test
Get rid of libpod pod inspect references
Remove libpod PodInspect struct.
Signed-off-by: Sujil02 <sushah@redhat.com>
Register system prune route, handler to support system prune,
Adds testcase to validate the system prune flow.
Signed-off-by: Sujil02 <sushah@redhat.com>
The length and size of our error messages on failure to pull
is huge. This patch at least eliminates some of the wrapping.
But I think eventually we need to look at containers/image
and see if we can modify the error messages to something a little
more human friendly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
While this commit was initially meant to fix#5847, it has turned into a
bigger refactoring which I did not manage to break into smaller pieces:
* Fix#5847 by refactoring the image-removal logic.
* Make the api handler for image-removal use the ABI code. This way,
both (i.e., ABI and Tunnel) end up using the same code. Achieving
this code share required to move some code around to prevent circular
dependencies.
* Everything in pkg/api (excluding pkg/api/types) must now only be
accessed from code using `ABISupport`.
* Avoid imports from entities on handlers to prevent circular
dependencies.
* Move `podman system service` logic into `cmd` to prevent circular
dependencies - it depends on pkg/api.
* Also remove the build header from infra/abi files. It will otherwise
confuse swagger and other tools; errors we cannot fix as go doesn't
expose a build-tag env variable.
Fixes: #5847
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add more default options parsing
Switch to using --time as opposed to --timeout to better match Docker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Fix support for socket activation, on remote and service
$ systemd-socket-activate -l 8083 --fdname=podman bin/podman system service --log-level=debug --time=30
$ bin/podman-remote --remote=tcp://[::]:8083 image ls
Or, use the podman.{socket,service} unit files
$ bin/podman-remote --remote=unix:///run/podman/podman.sock image ls
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add the ability to prune pods for api v2,
Includes the addition of force flag, for client side prompt.
Update test suite to support this use case.
Signed-off-by: Sujil02 <sushah@redhat.com>
this is second phase of removing unneeded bloat in the remote client. this is important to be able to reduce the client size as well as possible native compilation for windows/mac.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Adds ability to prune containers for v2.
Adds client side prompt with force flag and filters options to prune.
Signed-off-by: Sujil02 <sushah@redhat.com>
New script cross-references r.Handle() and r.HandleFunc()
calls against the preceding '// swagger:operation' comments,
and exits failure (with descriptive error messages) if any
comments do not match the code.
This script should not be necessary: the swagger comments
should be autogenerated from the source code.
Signed-off-by: Ed Santiago <santiago@redhat.com>
A few major fixes here:
- Support for attaching to Configured containers, to match Docker
behavior.
- Support for stream parameter has been improved (we now properly
handle cases where it is not set).
- Initial support for logs parameter has been added.
- Setting attach streams when the container has a terminal is now
supported.
- Errors are properly reported once the hijack has begun.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Also implement a new libpod endpoint to add more parameters and to
prevent us from converting between slices and maps and make use of
the filter parsing in the image backend.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement the `podman {container} logs` for the v2 client. The remote
client does not yet support it. There's some more work needed for the
rest api; some options are missing (e.g., printing names) while others
are broken (e.g., the until http parameter).
The remote parts will be tackled in a future change.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Added support for system service
* Enabled linting on the varlinkapi source, needed to support V2
service command
* Added support for PODMAN_SOCKET
Skip linting deprecated code
Rather than introduce bugs by correcting deprecated code, linting the
code is being skipped. Code that is being ported into V2 is being
checked.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
create a container in podmanv2 using specgen approach. this is the core implementation and still has quite a bit of code commented out specifically around volumes, devices, and namespaces. need contributions from smes on these parts.
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Implement `podman-push` and `podman-image-push` for the podmanV2
client.
* Tests for `pkg/bindings` are not possible at the time of writing as we
don't have a local registry running.
* Implement `/images/{name}/push` compat endpoint. Tests are not
implemented for this v2 endpoint. It has been tested manually.
General note: The auth config extraction from the http header is not
implement for push. Since it's not yet supported for other endpoints
either, I deferred it to future work.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
OpenShift Merge Robot
Brent Baude
Jhon Honce
Sujil02
Qi Wang
Daniel J Walsh
Matthew Heon
Matthew Heon
Valentin Rothberg
Anatoli Babenia
Ed Santiago