We initially believed that implementing this required support for
restarting containers after reboot, but this is not the case.
The unless-stopped restart policy acts identically to the always
restart policy except in cases related to reboot (which we do not
support yet), but it does not require that support for us to
implement it.
Changes themselves are quite simple, we need a new restart policy
constant, we need to remove existing checks that block creation
of containers when unless-stopped was used, and we need to update
the manpages.
Fixes#6508
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
address problem when multiple -t were sent. and rework remote build's tarball if a context dir is given other than ".".
Fixes: #6578Fixes: #6577
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman is blowing up with oci-umount hook, because
it was never rewritten to support the v1.0.0 value.
This PR adds support for the older version and cleans
up the hook handling.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
These were part of Podman v1.9, but were lost in the transition
to using Specgen to create containers. Most resource limits are
checked via the sysinfo package to ensure they are safe to use
(the cgroup is mounted, kernel support is present, etc) and
removed if not safe. Further, bounds checks are performed to
ensure that values are valid.
Ensure these warnings are printed client-side when they occur.
This part is a little bit gross, as it happens in pkg/infra and
not cmd/podman, which is largely down to how we implemented
`podman run` - all the work is done in pkg/infra and it returns
only once the container has exited, and we need warnings to print
*before* the container runs. The solution here, while inelegant,
avoid the need to extensively refactor our handling of run.
Should fix blkio-limit warnings that were identified by the FCOS
test suite.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Every line is sent back individually over the APIv2 as
logs, but we are not adding the '\n' to give us line breaks.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This started as a small fix to `podman inspect` where a container
and image, with the same name/tag, were present, and
`podman inspect` was run on that name. `podman inspect` in 1.9
(and `docker inspect`) will give you the container; in v2.0, we
gave the image. This was an easy fix (just reorder how we check
for image/container).
Unfortunately, in the process of testing this fix, I determined
that we regressed in a different area. When you run inspect on
a number of containers, some of which do not exist,
`podman inspect` should return an array of inspect results for
the objects that exist, then print a number of errors, one for
each object that could not be found. We were bailing after the
first error, and not printing output for the containers that
succeeded. (For reference, this applied to images as well). This
required a much more substantial set of changes to properly
handle - signatures for the inspect functions in ContainerEngine
and ImageEngine, plus the implementations of these interfaces,
plus the actual inspect frontend code needed to be adjusted to
use this.
Fixes#6556
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Fix a lint error of an used parameter. The error must have sneaked in
with a PR that was merged after the recent linter enablement.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Use the architecture of the local image when looking for a new image on
a registry. It seems to be common practice on ARM to tweak the
architecture choice to pull the correct image.
Fixes: #6613
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Use `--replace` for named containers and pods. This will clean up
previous containers and podsthat may not have been removed after a
system crash.
Fixes: #5485
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Addes more docker py test
Optimize test to import images from cache
Rename test class and dir for python unittest framework
Signed-off-by: Sujil02 <sushah@redhat.com>
--filter label=foo=bar, was been translated on the server side to
--filter label=foo --filter=bar
This PR fixes this back to what the user specified.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
ReadTheDocs was wrapping lines and removing leading spaces unless there
a blank line in between. This adds the blank lines to make the
examples more readable on https://docs.podman.io/en/latest/_static/api.html
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Adds some quick start up directions to the top of the
API v2 documentation and a few examples.
This strongly leverages comments from @jgallucci32 in #6535.
Fixes: #6535
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
drop check for current cgroup ownership if the cgroup manager is not
set to systemd.
Closes: https://github.com/containers/libpod/issues/4483
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Create a new template for generating a pod unit file. Eventually, this
allows for treating and extending pod and container generation
seprately.
The `--new` flag now also works on pods.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Refactor the systemd-unit generation code and move all the logic into
`pkg/systemd/generate`. The code was already hard to maintain but I
found it impossible to wire the `--new` logic for pods in all the chaos.
The code refactoring in this commit will make maintaining the code
easier and should make it easier to extend as well. Further changes and
refactorings may still be needed but they will easier.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rephrase the lookup error when the specified name or ID does not refer
to a container or pod. Until, only the pod-lookup error has been
returned which can be confusing when actually looking for a container;
a user might have just mistyped the ID or name.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rename the container ID file from "cid" to "ctr-id" to make the
generated unit files a) easier to read and to b) pro-actively
avoid any confusion when pod ID files are being added in the
future.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Support the `--pod-id-file` flag in the rm, start and stop pod commands.
This completes the already support flag in pod-create and is another
prerequisite for generating generic systemd unit files for pods.
Also add completions, docs and tests.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This fixes an error in the system tests, which expect that when
you try and kill a nonexistent pod with an incorrect signal, you
receive an error about the signal, not the pod.
At the same time, fix a missing return statement in the bindings,
which could also have caused us grief.
Fixes#6540
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This is the other command that benefits greatly from being run in
parallel, due to the potential 15-second timeout for containers
that ignore SIGTERM.
While we're at it, also clean up how stop timeout is set. This
needs to be an optional parameter, so that the value set when the
container is created with `--stop-timeout` will be respected.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Systemd enablement has to happen on the server side, since we need
check if the image is running systemd.
Also need to make sure user setting the StopSignal is not overriden on the
server side. But if not set and using systemd, we set it correctly.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This code will run container operations in parallel, up to a
given maximum number of threads. Currently, it has only been
enabled for local `podman rm` as a proof of concept.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When we moved to the new Namespace types in Specgen, we made a
distinction between taking a namespace from a pod, and taking it
from another container. Due to this new distinction, some code
that previously worked for both `--pod=$ID` and
`--uts=container:$ID` has accidentally become conditional on only
the latter case. This happened for Hostname - we weren't properly
setting it in cases where the container joined a pod.
Fortunately, this is an easy fix once we know to check the
condition.
Also, ensure that `podman pod inspect` actually prints hostname.
Fixes#6494
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Fix a bug when parsing the `ExposedPorts` of the image that lead to
panics when the field was set. The OCI image spec allows three valid
formats: `tcp/port`, `udp/port` and `port`
Fixes: #6490
Reported-by: @jgallucci32
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
this is step 1 to self-discovery of remote ssh connections. we add a remotesocket struct to info to detect what the socket path might be.
Co-authored-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Brent Baude <bbaude@redhat.com>
The cleanup process was already running and ensuring that mounts
and networking configuration was cleaned up on container stop,
but this was async from the actual `podman stop` command which
breaks some expectations - the container is still mounted at the
end of `podman stop` and will be cleaned up soon, but not
immediately. Fortunately, it's a trivial change to resolve this.
Fixes#5747
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We need to default to building podman. If you specify no build
tags you will not build podman, not podman-remote.
Just using remote flag to indicate podman-remote and !remote for
podman.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* podman --remote ssh://<user>:<password>@<host>:<port><path>
* podman --remote ssh://<user>:<password>@<host>:<port><path> \
--identity <path> --passphrase <phrase>
* ssh-add <key>
podman --remote ssh://<user>@<host><path>
* Fix `podman help` to run even if podman missing components
* Prompt for passphrase on stdin IFF key is protected and passphrase
not given via any other configuration
* cobra flags do not support optional value flags therefore refactored
--remote to be a boolean and --url will now contain the URI to Podman
service
Signed-off-by: Jhon Honce <jhonce@redhat.com>
We also need to rework container/image inspect to be separate,
but that can happen in another PR.
Fixes#6472
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
environment variables are handled differently on windows vs linux. here we split them to be handled but no actually processing of windows environment variables was done. it can be added for future. hoowever, now we dont get errors on windows about processing them.
Signed-off-by: Brent Baude <bbaude@redhat.com>
This adds bindings for starting exec sessions, and then uses them
to wire up detached exec. Code is heavily based on Attach code
for containers, slightly modified to handle exec sessions.
Bindings are presently attached-only, detached is pending on a
Conmon update landing in CI. I'll probably get to that next.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
the pod ps man page says .Label is valid go template format. i dont think the function was actually ever implemented.
Fixes#6448
Signed-off-by: Brent Baude <bbaude@redhat.com>
In cases of trying to export an image, if the image was not found, we leaked an empty tarball or directory depending on the format.
Fixes: #6409
Signed-off-by: Brent Baude <bbaude@redhat.com>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Matthew Heon
OpenShift Merge Robot
Brent Baude
Daniel J Walsh
Jhon Honce
Ashley Cui
Joseph Gooch
Valentin Rothberg
zhangguanzhang
Sujil02
Anders F Björklund
TomSweeneyRedHat
Giuseppe Scrivano
theunrealgeek
Qi Wang