Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
this is the first pass at implementing init containers for podman pods.
init containersare made popular by k8s as a way to run setup for pods
before the pods standard containers run.
unlike k8s, we support two styles of init containers: always and
oneshot. always means the container stays in the pod and starts
whenever a pod is started. this does not apply to pods restarting.
oneshot means the container runs onetime when the pod starts and then is
removed.
Signed-off-by: Brent Baude <bbaude@redhat.com>
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Users are complaining about read/only /var/tmp failing
even if TMPDIR=/tmp is set.
This PR Fixes: https://github.com/containers/podman/issues/10698
[NO TESTS NEEDED] No way to test this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Podman uses the volume option map to check if it has to mount the volume
or not when the container is started. Commit 28138dafcc added to uid
and gid options to this map, however when only uid/gid is set we cannot
mount this volume because there is no filesystem or device specified.
Make sure we do not try to mount the volume when only the uid/gid option
is set since this is a simple chown operation.
Also when a uid/gid is explicity set, do not chown the volume based on
the container user when the volume is used for the first time.
Fixes#10620
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
- Persist CDIDevices in container config
- Add e2e test
- Log HasDevice error and add additional condition for safety
Signed-off-by: Sebastian Jug <seb@stianj.ug>
We define in the man page that this overrides the default storage
options, but the code was appending to the existing options.
This PR also makes a change to allow users to specify --storage-opt="".
This will turn off all storage options.
https://github.com/containers/podman/issues/9852
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As part of a fix for an earlier bug (#5698) we added the ability
for Podman to chown volumes to correctly match the user running
in the container, even in adverse circumstances (where we don't
know the right UID/GID until very late in the process). However,
we only did this for volumes created automatically by a
`podman run` or `podman create`. Volumes made by
`podman volume create` do not get this chown, so their
permissions may not be correct. I've looked, and I don't think
there's a good reason not to do this chwon for all volumes the
first time the container is started.
I would prefer to do this as part of volume copy-up, but I don't
think that's really possible (copy-up happens earlier in the
process and we don't have a spec). There is a small chance, as
things stand, that a copy-up happens for one container and then
a chown for a second, unrelated container, but the odds of this
are astronomically small (we'd need a very close race between two
starting containers).
Fixes#9608
Signed-off-by: Matthew Heon <mheon@redhat.com>
Some packages used by the remote client imported the libpod package.
This is not wanted because it adds unnecessary bloat to the client and
also causes problems with platform specific code(linux only), see #9710.
The solution is to move the used functions/variables into extra packages
which do not import libpod.
This change shrinks the remote client size more than 6MB compared to the
current master.
[NO TESTS NEEDED]
I have no idea how to test this properly but with #9710 the cross
compile should fail.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
if --storage-opt are specified on the CLI append them after what is
specified in the configuration files instead of overriding it.
Closes: https://github.com/containers/podman/issues/9657
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes#9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
`staticcheck` is a golang code analysis tool. https://staticcheck.io/
This commit fixes a lot of problems found in our code. Common problems are:
- unnecessary use of fmt.Sprintf
- duplicated imports with different names
- unnecessary check that a key exists before a delete call
There are still a lot of reported problems in the test files but I have
not looked at those.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Systemd is now complaining or mentioning /var/run as a legacy directory.
It has been many years where /var/run is a symlink to /run on all
most distributions, make the change to the default.
Partial fix for https://github.com/containers/podman/issues/8369
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The podman events aren't read until the given timestamp if the
timestamp is in the future. It just reads all events until now
and exits afterwards.
This does not make sense and does not match docker. The correct
behavior is to read all events until the given time is reached.
This fixes a bug where the wrong event log file path was used
when running first time with a new storage location.
Fixes#8694
This also fixes the events api endpoint which only exited when
an error occurred. Otherwise it just hung after reading all events.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Docker provides extensibility through a plugin system, of which
several types are available. This provides an initial library API
for communicating with one type of plugins, volume plugins.
Volume plugins allow for an external service to create and manage
a volume on Podman's behalf.
This does not integrate the plugin system into Libpod or Podman
yet; that will come in subsequent pull requests.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Most of the builtin golang functions like os.Stat and
os.Open report errors including the file system object
path. We should not wrap these errors and put the file path
in a second time, causing stuttering of errors when they
get presented to the user.
This patch tries to cleanup a bunch of these errors.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This adds the database backend for network aliases. Aliases are
additional names for a container that are used with the CNI
dnsname plugin - the container will be accessible by these names
in addition to its name. Aliases are allowed to change over time
as the container connects to and disconnects from networks.
Aliases are implemented as another bucket in the database to
register all aliases, plus two buckets for each container (one to
hold connected CNI networks, a second to hold its aliases). The
aliases are only unique per-network, to the global and
per-container aliases buckets have a sub-bucket for each CNI
network that has aliases, and the aliases are stored within that
sub-bucket. Aliases are formatted as alias (key) to container ID
(value) in both cases.
Three DB functions are defined for aliases: retrieving current
aliases for a given network, setting aliases for a given network,
and removing all aliases for a given network.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Docker supports log-opt max_size and so does conmon (ALthough poorly).
Adding support for this allows users to at least make sure their containers
logs do not become a DOS vector.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently infr-command and --infra-image commands are ignored
from the user. This PR instruments them and adds tests for
each combination.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when joining an existing container user namespace, read the existing
mappings so the storage can be created with the correct ownership.
Closes: https://github.com/containers/podman/issues/7547
Signed-off-by: Giuseppe Scrivano <giuseppe@scrivano.org>
flouthoc
Daniel J Walsh
openshift-ci[bot]
Brent Baude
José Guilherme Vanz
cdoern
cdoern
Paul Holzinger
Ashley Cui
OpenShift Merge Robot
Giuseppe Scrivano
Sebastian Jug
wuhua.ck
Phoenix The Fallen
Matthew Heon
Paul Holzinger
Eduardo Vega
Valentin Rothberg
Matthew Heon
zhangguanzhang
Josh Soref
Giuseppe Scrivano
Qi Wang