Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
added support for --pid flag. User can specify ns:file, pod, private, or host.
container returns an error since you cannot point the ns of the pods infra container
to a container outside of the pod.
Signed-off-by: cdoern <cdoern@redhat.com>
Added logic and handling for two new Podman pod create Flags.
--cpus specifies the total number of cores on which the pod can execute, this
is a combination of the period and quota for the CPU.
--cpuset-cpus is a string value which determines of these available cores,
how many we will truly execute on.
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
For rootless users the infra container used the slirp4netns net mode
even when bridge was requested. We can support bridge networking for
rootless users so we have allow this. The default is not changed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when creating a pod with --infra-image and using a untagged image for
the infra-image (none/none), the lookup for the image's name was
creating a panic.
Fixes: #9374
Signed-off-by: baude <bbaude@redhat.com>
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes#9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Ensure that infra containers for pods will grab default sysctls
from containers.conf, to match how other containers are created.
This mostly affects the other containers in the pod, which will
inherit those sysctls when they join the pod's namespaces.
Signed-off-by: Matthew Heon <mheon@redhat.com>
It looks like this was previously removed because the default
hard-coded `/pause` so we would never take into account the image
config. I've removed the default in c/common and re-added support
to check config files.
While we're at it, fix ENTRYPOINT support - we should not be
setting this if we got ENTRYPOINT from the image.
Fixed https://bugzilla.redhat.com/show_bug.cgi?id=1853455
Signed-off-by: Matthew Heon <mheon@redhat.com>
Containers that share IPC Namespaces share each others
/dev/shm, which means a private /dev/shm needs to be setup
for the infra container.
Added a system test and an e2e test to make sure the
/dev/shm is shared.
Fixes: https://github.com/containers/podman/issues/8181
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently infr-command and --infra-image commands are ignored
from the user. This PR instruments them and adds tests for
each combination.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Most Libpod containers are made via `pkg/specgen/generate` which
includes code to generate an appropriate exit command which will
handle unmounting the container's storage, cleaning up the
container's network, etc. There is one notable exception: pod
infra containers, which are made entirely within Libpod and do
not touch pkg/specgen. As such, no cleanup process, network never
cleaned up, bad things can happen.
There is good news, though - it's not that difficult to add this,
and it's done in this PR. Generally speaking, we don't allow
passing options directly to the infra container at create time,
but we do (optionally) proxy a pre-approved set of options into
it when we create it. Add ExitCommand to these options, and set
it at time of pod creation using the same code we use to generate
exit commands for normal containers.
Fixes#7103
Signed-off-by: Matthew Heon <mheon@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add support to auto-update containers running in systemd units as
generated with `podman generate systemd --new`.
`podman auto-update` looks up containers with a specified
"io.containers.autoupdate" label (i.e., the auto-update policy).
If the label is present and set to "image", Podman reaches out to the
corresponding registry to check if the image has been updated. We
consider an image to be updated if the digest in the local storage is
different than the one of the remote image. If an image must be
updated, Podman pulls it down and restarts the container. Note that the
restarting sequence relies on systemd.
At container-creation time, Podman looks up the "PODMAN_SYSTEMD_UNIT"
environment variables and stores it verbatim in the container's label.
This variable is now set by all systemd units generated by
`podman-generate-systemd` and is set to `%n` (i.e., the name of systemd
unit starting the container). This data is then being used in the
auto-update sequence to instruct systemd (via DBUS) to restart the unit
and hence to restart the container.
Note that this implementation of auto-updates relies on systemd and
requires a fully-qualified image reference to be used to create the
container. This enforcement is necessary to know which image to
actually check and pull. If we used an image ID, we would not know
which image to check/pull anymore.
Fixes: #3575
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
calculating the image size can be an expensive operation. Avoid doing
it when creating a new container since the size is not needed.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Before Libpod supported named volumes, we approximated image
volumes by bind-mounting in per-container temporary directories.
This was handled by Libpod, and had a corresponding database
entry to enable/disable it.
However, when we enabled named volumes, we completely rewrote the
old implementation; none of the old bind mount implementation
still exists, save one flag in the database. With nothing
remaining to use it, it has no further purpose.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Enables most of the network-related functionality from
`podman run` in `podman pod create`. Custom CNI networks can be
specified, host networking is supported, DNS options can be
configured.
Also enables host networking in `podman play kube`.
Fixes#2808Fixes#3837Fixes#4432Fixes#4718Fixes#4770
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds network-related options to the pod in the database. We
are going to add the CLI frontend in further patches.
In short, this should greatly improve the ability of pods to
configure networking, once the CLI parsing is added.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
In order to run Podman with VM-based runtimes unprivileged, the
network must be set up prior to the container creation. Therefore
this commit modifies Podman to run rootless containers by:
1. create a network namespace
2. pass the netns persistent mount path to the slirp4netns
to create the tap inferface
3. pass the netns path to the OCI spec, so the runtime can
enter the netns
Closes#2897
Signed-off-by: Gabi Beyer <gabrielle.n.beyer@intel.com>
Requirement from https://github.com/containers/libpod/issues/3575#issuecomment-512238393
Added --pull for podman create and pull to match the newly added flag in docker CLI.
`missing`: default value, podman will pull the image if it does not exist in the local.
`always`: podman will always pull the image.
`never`: podman will never pull the image.
Signed-off-by: Qi Wang <qiwan@redhat.com>
In order to run Podman with VM-based runtimes unprivileged, the
network must be set up prior to the container creation. Therefore
this commit modifies Podman to run rootless containers by:
1. create a network namespace
2. pass the netns persistent mount path to the slirp4netns
to create the tap inferface
3. pass the netns path to the OCI spec, so the runtime can
enter the netns
Closes#2897
Signed-off-by: Gabi Beyer <gabrielle.n.beyer@intel.com>
the compilation demands of having libpod in main is a burden for the
remote client compilations. to combat this, we should move the use of
libpod structs, vars, constants, and functions into the adapter code
where it will only be compiled by the local client.
this should result in cleaner code organization and smaller binaries. it
should also help if we ever need to compile the remote client on
non-Linux operating systems natively (not cross-compiled).
Signed-off-by: baude <bbaude@redhat.com>
When sourcing from an image, we need to grab its entrypoint first
and then add command on to mimic the behavior of Docker.
The default Kube pause image just sets ENTRYPOINT, and not CMD,
so nothing changes there, but this ought to fix other images
(for example, nginx would try to run the pause command instead of
an nginx process without this patch)
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
I was seeing some segfaults where image config was being passed
as nil, causing a nil dereference segfault. Fix the apparent
cause and add some safety fencing to try and ensure it doesn't
happen again.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If the pod infra container is overriden, we want to run the entry point of the image, instead of the default infra command. This allows users to override the infra-image with greater ease.
Also use process environment variables from image
Signed-off-by: Peter Hunt <pehunt@redhat.com>
The toolbox project would benefit from a few changes to more closely
resembe the original atomic cli project. Changes made are:
* only pull image for container runlabel if the label exists in the image
* if a container image does not have the desired label, exit with non-zero
Signed-off-by: baude <bbaude@redhat.com>
DockerRegistryOptions.DockerInsecureSkipTLSVerify as an types.OptionalBool
can now represent that value, so forceSecure is redundant.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
we need to allow users to expose ports to the host for the purposes
of networking, like a webserver. the port exposure must be done at
the time the pod is created.
strictly speaking, the port exposure occurs on the infra container.
Signed-off-by: baude <bbaude@redhat.com>
As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Daniel J Walsh
José Guilherme Vanz
cdoern
cdoern
Valentin Rothberg
Paul Holzinger
Milivoje Legenovic
baude
Matthew Heon
Matthew Heon
OpenShift Merge Robot
Ashley Cui
zhangguanzhang
Giuseppe Scrivano
Gabi Beyer
Chen Zhiwei
Qi Wang
Peter Hunt
Miloslav Trmač