In libpod/logs.LogLine.Write(), don't write a newline to stdout/stderr
when the log message is only part of a line.
In libpod.ConmonOCIRuntime.HTTPAttach(), don't send a newline over the
HTTP connection when the log message is only part of a line.
In pkg/api/handlers/compat.LogsFromContainer(), don't send a newline
over the HTTP connection when the log message is only part of a line,
and don't make doing so conditional on whether or not the client used
the docker or podman endpoint.
In pkg/domain/infra/tunnel.ContainerEngine.ContainerLogs(), don't add
our own newline to log messages, since they already come through from
the server when they need to.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
For docker compat include information about available volume, log and
network drivers which should be listed under the plugins key.
Fixes#11265
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Endpoint /build logs an info entry when a client uses the wrong
Content-Type for build payload. Given Content-Type is ignored and
assumed to be "application/x-tar".
Endpoint /libpod/build will fail unless "application/x-tar" or
"application/tar" is given for Content-Type. "application/tar" will
be logged as an info entry.
Fixes#11012
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add the --userns flag to podman pod create and keep
track of the userns setting that pod was created with
so that all containers created within the pod will inherit
that userns setting.
Specifically we need to be able to launch a pod with
--userns=keep-id
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Bump Buildah to v1.22.0 in preparation for RHEL 8.5 and
RHEL 9.0beta. Also bump c/common to v0.42.1
[NO TESTS NEEDED]
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Fixes:
- Do not show healthcheck status if not available or if container
status is "created" (Docker behaviour)
- Show healthcheck configuration if present (Config.Healthcheck)
Tests:
- Ensure State.Health is not present if container status is "created"
- Ensure Config.Healthcheck is present and values correct
- Ensure State.Health is present if container started
Signed-off-by: Milivoje Legenovic <m.legenovic@gmail.com>
Address a number of issues in the streaming logic in remote build, most
importantly an error in using buffered channels on the server side.
The pattern below does not guarantee that the channel is entirely read
before the context fires.
for {
select {
case <- bufferedChannel:
...
case <- ctx.Done():
...
}
}
Fixes: #10154
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement container to container copy. Previously data could only be
copied from/to the host.
Fixes: #7370
Co-authored-by: Mehul Arora <aroram18@mcmaster.ca>
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
podman stats polled by default in a 1 sec period.
This can put quite some load on a machine if you run many containers.
The default value is now 5 seconds.
You can change this interval with a new, optional, --interval, -i cli flag.
The api request got also a interval query parameter for the same purpose.
Additionally a unused const was removed.
Api and cli will fail the request if a 0 or negative value is passed in.
Signed-off-by: Thomas Weber <towe75@googlemail.com>
By proxy by vendoring containers/common. Previously, a "dangling" image
was an untagged image; just a described in the Docker docs. The
definition of dangling has now been refined to an untagged image without
children to be compatible with Docker.
Further update a redundant image-prune test.
Fixes: #10998Fixes: #10832
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The global flag will work in either location, and this flag just breaks
users expectations, and is basically a noop.
Also fix global storage-opt so that podman-remote can use it.
[NO TESTS NEEDED] Since it would be difficult to test in ci/cd.
Fixes: https://github.com/containers/podman/issues/10264
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Handle the platform parameter correctly. The parameter was only parsed
in presence of credentials and the code was a bit complex. Also add a
regression test.
Fixes: #10977
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The `IgnorePlatform` options has been removed from the
`LookupImageOptions` in libimage to properly support multi-arch images.
Skip one buildah-bud test which requires updated CI images. This is
currently being done in github.com/containers/podman/pull/10829 but
we need to unblock merging common and buildah into podman.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Adds the new --infra-name command line argument allowing users to define
the name of the infra container
Issue #10794
Signed-off-by: José Guilherme Vanz <jvanz@jvanz.com>
With docker-compose, there is a use case where you can `docker-compose
up -d`, then change a file like docker-compose.yml and run up again.
This requires a ContainerConfig with at least Volumes be populated in
the inspect data. This PR adds just that.
Fixes: #10795
Signed-off-by: Brent Baude <bbaude@redhat.com>
First, make podman diff accept optionally a second argument. This allows
the user to specify a second image/container to compare the first with.
If it is not set the parent layer will be used as before.
Second, podman container diff should only use containers and podman
image diff should only use images. Previously, podman container diff
would use the image when both an image and container with this name
exists.
To make this work two new parameters have been added to the api. If they
are not used the previous behaviour is used. The same applies to the
bindings.
Fixes#10649
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Pull the trigger on the `pkg/registries` package which acted as a proxy
for `c/image/pkg/sysregistriesv2`. Callers should be using the packages
from c/image directly, if needed at all.
Also make use of libimage's SystemContext() method which returns a copy
of a system context, further reducing the risk of unintentionally
altering global data.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
feat: read secret config from config file if the user hasn't entered
explicit config values
feat: allow to specify `--driver-opts opt1=val1,opt2=val2` in the secret
create command to allow overriding the default values
fix: show driver options in `podman secret inspect`
Signed-off-by: Tino Rusch <tino.rusch@gmail.com>
Added parsing and handling for the healthCheck status within containers.go. Also modified tests
fixes#10457
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
Much to my regret, there is a number of images in the wild with invalid
platforms breaking the platform checks in libimage that want to make
sure that a local image is matching the expected platform.
Imagine a `podman run --arch=arm64 fedora` with a local amd64 fedora
image. We really shouldn't use the local one in this case and pull down
the arm64 one.
The strict platform checks in libimage in combination with invalid
platforms in images surfaced in Podman being able to pull an image but
failing to look it up in subsequent presence checks. A `podman run`
would hence pull such an image but fail to create the container.
Support images with invalid platforms by vendoring the latest HEAD from
containers/common. Also remove the partially implemented pull-policy
logic from Podman and let libimage handle that entirely. However,
whenever --arch, --os or --platform are specified, the pull policy will
be forced to "newer". This way, we pessimistically assume that the
local image has an invalid platform and we reach out to the registry.
If there's a newer image (i.e., one with a different digest), we'll pull
it down.
Please note that most of the logic has either already been implemented
in libimage or been moved down which allows for removing some clutter
from Podman.
[NO TESTS NEEDED] since c/common has new tests. Podman can rely on the
existing tests.
Fixes: #10648Fixes: #10682
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When starting a process with `podman exec -it` the terminal is resized
after the process is started. To fix this allow exec start to accept the
terminal height and width as parameter and let it resize right before
the process is started.
Fixes#10560
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added handling in entities and compat to support passing a specified OS/Arch while importing from SRC.
fixes#10566
Signed-off-by: cdoern <cbdoer23@g.holycross.edu>
a9cb824981 changed the expectations of the
dockerfile parameter to be json data however it's a string. In order to
support both, let's attempt json and fall back to a string if the json
parsing fails.
Closes#10660
Signed-off-by: Alex Schultz <aschultz@redhat.com>
Nalin Dahyabhai
OpenShift Merge Robot
Jhon Honce
Paul Holzinger
openshift-ci[bot]
Daniel J Walsh
cdoern
TomSweeneyRedHat
Milivoje Legenovic
Valentin Rothberg
Mehul Arora
Thomas Weber
José Guilherme Vanz
Vikas Goel
cdoern
Brent Baude
Matej Vasek
Tino Rusch
Alex Schultz