Add a new --ip flag to podman play kube. This is used to specify a
static IP address which should be used for the pod. This option can be
specified several times because play kube can create more than one pod.
Fixes#8442
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The --log-driver flag was silently ignored by podman play kube. This
regression got introduced during the play kube rework.
Unfortunately the test for this was skipped for no good reason.
Fixes#10015
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add a new --rootless-cni option to podman unshare to also join the
rootless-cni network namespace. This is useful if you want to connect
to a rootless container via IP address. This is only possible from the
rootless-cni namespace and not from the host namespace. This option also
helps to debug problems in the rootless-cni namespace.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
One of the side-effects of the `--userns=keep-id` command is
switching the default user of the container to the UID of the
user running Podman (though this can still be overridden by the
`--user` flag). However, it did this by setting the UID and GID
in the OCI spec, and not by informing Libpod of its intention to
switch users via the `WithUser()` option. Because of this, a lot
of the code that should have triggered when the container ran
with a non-root user was not triggering. In the case of the issue
that this fixed, the code to remove capabilities from non-root
users was not triggering. Adjust the keep-id code to properly
inform Libpod of our intention to use a non-root user to fix
this.
Also, fix an annoying race around short-running exec sessions
where Podman would always print a warning that the exec session
had already stopped.
Fixes#9919
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
With the new rootless cni supporting network connect/disconnect is easy.
Combine common setps into extra functions to prevent code duplication.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add support for secretRef and secretKeyRef to allow env vars to be set
from a secret. As K8S secrets are dictionaries the secret value must
be a JSON dictionary compatible with the data field of a K8S secret
object. The keys must consist of alphanumeric characters, '-', '_'
or '.', and the values must be base64 encoded strings.
Signed-off-by: Alban Bedel <albeu@free.fr>
In K8S the pod creation fails if an env var reference a non existing
config map key. It can be marked as optional, but per default it is
mandatory. Podman on the other hand always treat such references as
optional.
Rework envVarsFrom() and envVarValue() to additionaly return an error
and add support for the optional attribute in configMapRef and
configMapKeyRef.
Signed-off-by: Alban Bedel <albeu@free.fr>
When kube play fails to create a volume, it should say which volume had
the problem so the user doesn't have to guess. For the following pod
spec:
apiVersion: v1
kind: Pod
metadata:
name: mypod
spec:
containers:
- name: myfrontend
image: nginx
volumeMounts:
- mountPath: "/var/www/html"
name: mypd
volumes:
- name: mypd
hostPath:
path: /var/blah
podman will now report:
Error: failed to create volume "mypd": error in parsing HostPath
in YAML: error checking path "/var/blah": stat /var/blah: no such
file or directory
Signed-off-by: Jordan Christiansen <xordspar0@gmail.com>
Currently pull policy is set incorrectly when users set --pull-never.
Also pull-policy is not being translated correctly when using
podman-remote.
Fixes: #9573
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
As part of a fix for an earlier bug (#5698) we added the ability
for Podman to chown volumes to correctly match the user running
in the container, even in adverse circumstances (where we don't
know the right UID/GID until very late in the process). However,
we only did this for volumes created automatically by a
`podman run` or `podman create`. Volumes made by
`podman volume create` do not get this chown, so their
permissions may not be correct. I've looked, and I don't think
there's a good reason not to do this chwon for all volumes the
first time the container is started.
I would prefer to do this as part of volume copy-up, but I don't
think that's really possible (copy-up happens earlier in the
process and we don't have a spec). There is a small chance, as
things stand, that a copy-up happens for one container and then
a chown for a second, unrelated container, but the odds of this
are astronomically small (we'd need a very close race between two
starting containers).
Fixes#9608
Signed-off-by: Matthew Heon <mheon@redhat.com>
Erik Sjolund reported an issue where a badly formated file
could be passed into the `--tz` option and then the date in the container
would be badly messed up:
```
erik@laptop:~$ echo Hello > file.txt
erik@laptop:~$ podman run --tz=../../../home/erik/file.txt --rm -ti
docker.io/library/alpine cat /etc/localtime
Hello
erik@laptop:~$ podman --version
podman version 3.0.0-rc1
erik@laptop:~$
```
This fix checks to make sure the TZ passed in is a valid
value and then proceeds with the rest of the processing.
This was first reported as a potential security issue, but it
was thought not to be. However, I thought closing the hole
sooner rather than later would be good.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Fixes#5788
This commit adds support for named volumes in podman-generate-kube.
Named volumes are output in the YAML as PersistentVolumeClaims.
To avoid naming conflicts, the volume name is suffixed with "-pvc".
This commit adds a corresponding suffix for host path mounts.
Host path volumes are suffixed with "-host".
Signed-off-by: Jordan Williams <jordan@jwillikers.com>
there was a documentation issue for the kernel that reported the range
to be different than on cgroup v1.
The issue has been fixed in crun/runc. Adapt the test.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The New York timezone changes between summer and winter time.
Make sure the test allows both timezones.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Ignore permission errors when copying from a rootless container.
TTY devices inside rootless containers are owned by the host's
root user which is "nobody" inside the container's user namespace
rendering us unable to even read them.
Enable the integration test which was temporarily disabled for rootless
users.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently if you attempt to create a kube.yaml file off of a non running
container where the container runs as a specific User, the creation
fails because the storage container is not mounted. Podman is supposed to
read the /etc/passwd entry inside of the container but since the
container is not mounted, the c.State.Mountpoint == "". Podman
incorrectly attempts to read /etc/passwd on the host, and fails if the
specified user is not in the hosts /etc/passwd.
This PR mounts the storage container, if it was not mounted so the read
succeeds.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This patch will allow users to pass in the time 0.
Currently the timeout will take 10 seconds if user passes
in the 0 flag.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Traditionally, the path resolution for containers has been resolved on
the *host*; relative to the container's mount point or relative to
specified bind mounts or volumes.
While this works nicely for non-running containers, it poses a problem
for running ones. In that case, certain kinds of mounts (e.g., tmpfs)
will not resolve correctly. A tmpfs is held in memory and hence cannot
be resolved relatively to the container's mount point. A copy operation
will succeed but the data will not show up inside the container.
To support these kinds of mounts, we need to join the *running*
container's mount namespace (and PID namespace) when copying.
Note that this change implies moving the copy and stat logic into
`libpod` since we need to keep the container locked to avoid race
conditions. The immediate benefit is that all logic is now inside
`libpod`; the code isn't scattered anymore.
Further note that Docker does not support copying to tmpfs mounts.
Tests have been extended to cover *both* path resolutions for running
and created containers. New tests have been added to exercise the
tmpfs-mount case.
For the record: Some tests could be improved by using `start -a` instead
of a start-exec sequence. Unfortunately, `start -a` is flaky in the CI
which forced me to use the more expensive start-exec option.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to pass the cni interface descriptions to cni teardowns.
Otherwise cni cannot find the correct cache files because the
interface name might not match the networks. This can only happen
when network disconnect was used.
Fixes#9602
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Fixes: https://github.com/containers/podman/issues/9582
This PR also adds tests to make sure SELinux labels match the runtime,
or if init is specified works with the correct label.
Add tests for selinux kvm/init labels
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Some log tests were duplicated, and some didn't need to be repeated for
every driver. Also, added some comments
Signed-off-by: Ashley Cui <acui@redhat.com>
Currently podman is ignoreing the build --timestamp flag.
This PR fixes this for local and remote clients.
Fixes: https://github.com/containers/podman/issues/9569
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Move the core of renaming logic into the DB. This guarantees a
lot more atomicity than we have right now (our current solution,
removing the container from the DB and re-creating it, is *VERY*
not atomic and prone to leaving a corrupted state behind if
things go wrong. Moving things into the DB allows us to remove
most, but not all, of this - there's still a potential scenario
where the c/storage rename fails but the Podman rename succeeds,
and we end up with a mismatched state.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Since we have no good way to enable this on the server side, we will
just allow it to be set on the client side. This should solve almost all
cases.
Partially fixes: https://github.com/containers/podman/issues/9500
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Added ID to default
removed outdated imports
slight refactor
Test Network Headers added to network_test.go
Signed-off-by: Parker Van Roy <pvanroy@redhat.com>
Only the the network mode bridge supports cni networks.
Other network modes cannot use network connect/disconnect
so we should throw a error.
Fixes#9496
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The order of CapAdd when inspecting containers is deterministic.
However, the order of CapDrop is not (for unclear reasons). Add a
quick sort on the final array to guarantee a consistent order.
Fixes#9490
Signed-off-by: Matthew Heon <mheon@redhat.com>
The libpod network logic knows about networks IDs but OCICNI
does not. We cannot pass the network ID to OCICNI. Instead we
need to make sure we only use network names internally. This
is also important for libpod since we also only store the
network names in the state. If we would add a ID there the
same networks could accidentally be added twice.
Fixes#9451
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Instead of using the container's mountpoint as the base of the
chroot and indexing from there by the volume directory, instead
use the full path of what we want to copy as the base of the
chroot and copy everything in it. This resolves the bug, ends up
being a bit simpler code-wise (no string concatenation, as we
already have the full path calculated for other checks), and
seems more understandable than trying to resolve things on the
destination side of the copy-up.
Fixes#9354
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Podman -s crashes when the user specifies the '{{ .Size }}` format
on the podman ps command, without specifying the --size option.
This PR will stop the crash and print out a logrus.Error stating that
the caller should add the --size option.
Fixes: https://github.com/containers/podman/issues/9408
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We recieved an issue with an image that was built with
entrypoint=[""]
This blows up on Podman, but works on Docker.
When we setup the OCI Runtime, we should drop
entrypoint if it is == [""]
https://github.com/containers/podman/issues/9377
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently if the host shares container storage with a container
running podman, the podman inside of the container resets the
storage on the host. This can cause issues on the host, as
well as causes the podman command running the container, to
fail to unmount /dev/shm.
podman run -ti --rm --privileged -v /var/lib/containers:/var/lib/containers quay.io/podman/stable podman run alpine echo hello
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
* unlinkat /var/lib/containers/storage/overlay-containers/a7f3c9deb0656f8de1d107e7ddff2d3c3c279c11c1635f233a0bffb16051fb2c/userdata/shm: device or resource busy
Since podman is volume mounting in the graphroot, it will add a flag to
/run/.containerenv to tell podman inside of container whether to reset storage or not.
Since the inner podman is running inside of the container, no reason to assume this is a fresh reboot, so if "container" environment variable is set then skip
reset of storage.
Also added tests to make sure /run/.containerenv is runnig correctly.
Fixes: https://github.com/containers/podman/issues/9191
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This one is rather bizarre because it triggers only on some
systems. I've included a CI test, for example, but I'm 99% sure
we use images in CI that have volumes over empty directories, and
the earlier patch to change copy-up implementation passed CI
without complaint.
I can reproduce this on a stock F33 VM, but that's the only place
I have been able to see it.
Regardless, the issue: under certain as-yet-unidentified
environmental conditions, the copier.Get method will return an
ENOENT attempting to stream a directory that is empty. Work
around this by avoiding the copy altogether in this case.
Signed-off-by: Matthew Heon <mheon@redhat.com>
when creating a pod with --infra-image and using a untagged image for
the infra-image (none/none), the lookup for the image's name was
creating a panic.
Fixes: #9374
Signed-off-by: baude <bbaude@redhat.com>
Fixes: https://github.com/containers/podman/issues/9290
Currently we still have hard coded --isolation=chroot for podman-remote build.
Implement missing arguments for podman build
Implements
--jobs, --disable-compression, --excludes
Fixes:
MaxPullPushRetries
RetryDuration
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When we stop a container we are printing the full id,
this does not match Docker behaviour or the start behavior.
We should be printing the users rawInput when we successfully
stop the container.
Fixes: https://github.com/containers/podman/issues/9386
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman is always chowning the WORKDIR to root:root
This PR will return if the WORKDIR already exists.
Fixes: https://github.com/containers/podman/issues/9387
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The logic in the e2e test for multiple network aliases is indicating the
test should wait for the containerized nginx to be ready. As this may
take some time, the test does an exponential backoff starting at 2050ms.
Fix the logic by removing the `Expect(...)` call during the exponential
backoff. Otherwise, the test errors immediately.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The timestamps of some images must have changed changing the number of
expected filtered images. The test conditions seem fragile but for now
it's more important to get CI back.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
now getCgroupProcess takes the longest path on cgroup v1, instead of
complaining if the paths are different.
This should help when --cgroups=split is used on cgroup v1 and the
process cgroups look like:
$ cat /proc/self/cgroup
11:pids:/user.slice/user-0.slice/session-4.scope
10:blkio:/
9:cpuset:/
8:devices:/user.slice
7:freezer:/
6:memory:/user.slice/user-0.slice/session-4.scope
5:net_cls,net_prio:/
4:hugetlb:/
3:cpu,cpuacct:/
2:perf_event:/
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when printing out json format, we mistakenly changed the Created field
output to be a time.time in a different commit. This allows for
override of the Created field to be a unix ts as type int64.
Fixes: #9315
Signed-off-by: baude <bbaude@redhat.com>
When doing a container inspect on a container with unlimited ulimits,
the value should be -1. But because the OCI spec requires the ulimit
value to be uint64, we were displaying the inspect values as a uint64 as
well. Simple change to display as an int64.
Fixes: #9303
Signed-off-by: baude <bbaude@redhat.com>
The old copy-up implementation was very unhappy with symlinks,
which could cause containers to fail to start for unclear reasons
when a directory we wanted to copy-up contained one. Rewrite to
use the Buildah Copier, which is more recent and should be both
safer and less likely to blow up over links.
At the same time, fix a deadlock in copy-up for volumes requiring
mounting - the Mountpoint() function tried to take the
already-acquired volume lock.
Fixes#6003
Signed-off-by: Matthew Heon <mheon@redhat.com>
Service needs to be restarted in order to read the CONTAINERS_CONF file.
Not resetting this can lead to lots of flakes, since the test will use
whatever the host system has to be set in it's containers.conf.
Fixes: https://github.com/containers/podman/issues/9286
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Do not play with capabilities for privileged containers where all
capabilities will be set implicitly.
Also, avoid the device check when running privileged since all of /dev/*
will be mounted in any case.
Fixes: #8897
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
The c/storage library is subject to TOCTOUs as the central container and
image storage may be shared by many instances of many tools. As shown
in #6510, it's fairly easy to have multiple instances of Podman running
in parallel and yield image-lookup errors when removing them.
The underlying issue is the TOCTOU of removal being split into multiple
stages of first reading the local images and then removing them. Some
images may already have been removed in between the two stages. To make
image removal more robust, handle errors at stage two when a given image
is not present (anymore) in the storage.
Fixes: #6510
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Buildah bud passes a bunch more flags then podman build.
We need to implement hook up all of these flags to get full functionality.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
add the ability to prune unused cni networks. filters are not implemented
but included both compat and podman api endpoints.
Fixes :#8673
Signed-off-by: baude <bbaude@redhat.com>
The allocated `tmpNetworkStatus` must be allocated with the length 0.
Otherwise append would add new elements to the end of the slice and
not at the beginning of the allocated memory.
This caused inspect to fail since the number of networks did not
matched the number of network statuses.
Fixes#9234
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
The spec of a Kube Container has a `Command` and `Args`. While both are
slices, the `Command` is the counterpart of the entrypoint of a libpod
container. Kube is also happily accepting the arguments to as following
items in the slice but it's cleaner to move those to `Args`.
Fixes: #9211
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when creating a macvlan network, we should honor gateway, subnet, and
mtu as provided by the user.
Fixes: #9167
Signed-off-by: baude <bbaude@redhat.com>
The mtu default value is currently forced to 65520.
This let the user control it using the config key network_cmd_options,
i.e.: network_cmd_options=["mtu=9000"]
Signed-off-by: bitstrings <pino.silvaggio@gmail.com>
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes#9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
instead of using the --macvlan to indicate that you want to make a
macvlan network, podman network create now honors the driver name of
*macvlan*. Any options to macvlan, like the parent device, should be
specified as a -o option. For example, -o parent=eth0.
the --macvlan option was marked as deprecated in the man page but is
still supported for the duration of 3.0.
Signed-off-by: baude <bbaude@redhat.com>
The `--network` flag is parsed differently for `podman pod create`.
This causes confusion and problems for users. The extra parsing
logic ignored unsupported network options such as `none`,
`container:...` and `ns:...` and instead interpreted them as cni
network names.
Tests are added to ensure the correct errors are shown.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1915332
```
According to the Docker docs, the consistency option should be ignored on Linux.
the possible values are 'cached', 'delegated', and 'consistent', but they should be ignored equally.
This is a widely used option in scripts run by developer machines, as this makes file I/O less horribly slow on MacOS.
```
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
implement remote API for --all and --ignore flags for podman stop
implement remote API for --all flags for podman stop
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when creating kubernetes yaml from containers and pods, we should honor
any custom dns settings the user provided. in the case of generate kube,
these would be provided by --dns, --dns-search, and --dns-opt. if
multiple containers are involved in the generate, the options will be
cumulative and unique with the exception of dns-opt.
when replaying a kube file that has kubernetes dns information, we now
also add that information to the pod creation.
the options for dnspolicy is not enabled as there seemed to be no direct
correlation between kubernetes and podman.
Fixes: #9132
Signed-off-by: baude <bbaude@redhat.com>
Fix man page to document podman push --format fully.
Also found that push was not handling the tlsverify so fixed this.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove bindings that are not handled over the API.
Leaving this one to not use image pull, since this would
break progress handling. We should revisit this in the
future.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Make sure we pass the network aliases as capability args to the
cnitool in the rootless-cni-infra container. Also update the
dnsname plugin in the cni-infra container.
Fixes#8567
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Change API Handlers to use the same functions that the
local podman uses.
At the same time:
Cleanup and pass proper bindings. Remove cli options from
podman-remote push. Cleanup manifest push.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Use a mutex to synchronize the slice for storing tests results.
Running the e2e tests in parallel is otherwise subject to race
conditions surfacing in lost entries.
Fixes: #8358
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fixup the bindings and the handling of the --external --por and --sort
flags.
The --storage option was renamed --external, make sure we use
external up and down the stack.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when inspecting a container that is only connected to the default
network, we should populate the default network in the container inspect
information.
Fixes: #6618
Signed-off-by: baude <bbaude@redhat.com>
MH: Small fixes, added another test
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
A container's workdir can be specified via the CLI via `--workdir` and
via an image config with the CLI having precedence.
Since images have a tendency to specify workdirs without necessarily
shipping the paths with the root FS, make sure that Podman creates the
workdir. When specified via the CLI, do not create the path, but check
for its existence and return a human-friendly error.
NOTE: `crun` is performing a similar check that would yield exit code
127. With this change, however, Podman performs the check and yields
exit code 126. Since this is specific to `crun`, I do not consider it
to be a breaking change of Podman.
Fixes: #9040
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
podman-remote search had some FIXMEs in tests that were failing.
So I reworked the search handler to use the local abi. This
means the podman search and podman-remote search will use the
same functions.
While doing this, I noticed we were just outputing errors via
logrus.Error rather then returning them, which works ok for
podman but the messages get lost on podman-remote. Changed
the code to actually return the error messages to the caller.
This allows us to turn on the remaining podman-remote FIXME
tests.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The --default-mounts-file path was not being handled in
podman build. This will enable it to use for testing.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Currently podman implements --override-arch and --overide-os
But Podman has made these aliases for --arch and --os. No
reason to have to specify --override, since it is clear what
the user intends.
Currently if the user specifies an --override-arch field but the
image was previously pulled for a different Arch, podman run uses
the different arch. This PR also fixes this issue.
Fixes: https://github.com/containers/podman/issues/8001
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
when doing a network creation, the dnsname plugin should be disabled
when the --internal bool is set. a warning is displayed if this
happens and docs are updated.
Signed-off-by: baude <bbaude@redhat.com>
Just running through the tests that have SkipIfRemote("FIXME")
and attempting to not skip. Found these tests now work.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Unlike the container storage all e2e test are using the same cni
config directory. This causes problems if the network name already
exists. Using random names will make the second run pass even if the
first failed. This is only done to prevent full CI failures.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
If the container create command contains an argument with double
curly braces the golang template parsing can fail since it tries
to interpret the value as variable. To fix this change the default
delimiter for the internal template to `{{{{`.
Fixes#9034
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
I found several problems with container remove
podman-remote rm --all
Was not handled
podman-remote rm --ignore
Was not handled
Return better errors when attempting to remove an --external container.
Currently we return the container does not exists, as opposed to container
is an external container that is being used.
This patch also consolidates the tunnel code to use the same code for
removing the container, as the local API, removing duplication of code
and potential problems.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When doing a podman images, manifests lists look just like images, so
it is logical that users would assume that they can just podman push them
to a registry. The problem is we throw out weird errors when this happens
and users need to somehow figure out this is a manifest list rather then
an image, and frankly the user will not understand the difference.
This PR will make podman push just do the right thing, by failing over and
attempting to push the manifest if it fails to push the image.
Fix up handling of manifest push
Protocol should bring back a digest string, which can either be
printed or stored in a file.
We should not reimplement the manifest push setup code in the tunnel
code but take advantage of the api path, to make sure remote and local
work the same way.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
partially revert 95c45773d7
restrict the cases where /sys is bind mounted from the host.
The heuristic doesn't detect all the cases where the bind mount is not
necessary, but it is an improvement on the previous version where /sys
was always bind mounted for rootless containers unless --net none was
specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Basic theory: We remove the container, but *only from the DB*.
We leave it in c/storage, we leave the lock allocated, we leave
it running (if it is). Then we create an identical container with
an altered name, and add that back to the database. Theoretically
we now have a renamed container.
The advantage of this approach is that it doesn't just apply to
rename - we can use this to make *any* configuration change to a
container that does not alter its container ID.
Potential problems are numerous. This process is *THOROUGHLY*
non-atomic at present - if you `kill -9` Podman mid-rename things
will be in a bad place, for example. Also, we can't rename
containers that can't be removed normally - IE, containers with
dependencies (pod infra containers, for example).
The largest potential improvement will be to move the majority of
the work into the DB, with a `RecreateContainer()` method - that
will add atomicity, and let us remove the container without
worrying about depencies and similar issues.
Potential problems: long-running processes that edit the DB and
may have an older version of the configuration around. Most
notable example is `podman run --rm` - the removal command needed
to be manually edited to avoid this one. This begins to get at
the heart of me not wanting to do this in the first place...
This provides CLI and API implementations for frontend, but no
tunnel implementation. It will be added in a future release (just
held back for time now - we need this in 3.0 and are running low
on time).
This is honestly kind of horrifying, but I think it will work.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This involves a new test binary (a basic implementation of the
volume plugin protocol) and a new image on quay.io (Containerfile
to produce it and all sources located in this commit). The image
is used to run a containerized plugin we can test against.
Signed-off-by: Matthew Heon <mheon@redhat.com>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We now set Entrypoint when interpeting the image Entrypoint (or yaml.Command)
and Command when interpreting image Cmd (or yaml.Args)
This change is kind of breaking because now checking Config.Cmd won't return
the full command, but only the {cmd,args}.
Adapt the tests to this change as well
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Adding another check in the `podman search --list-tags --format json` test case.
Replacing an anonymous struct by \`listEntryTag\` struct.
Signed-off-by: Alexandre Fourcat <afourcat@gmail.com>
`podman ps --format {{.Networks}}` will show all connected networks for
this container. For `pod ps` it will show the infra container networks.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Allow to filter on the network name or full id.
For pod ps it will filter on the infra container networks.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When I launch a container with --userns=keep-id the rootless processes
should have no caps by default even if I launch the container with
--privileged. It should only get the caps if I specify by hand the
caps I want leaked to the process.
Currently we turn off capeff and capamb, but not capinh. This patch
treats capinh the same way as capeff and capamb.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
First, use the pflag library to parse the flags. With this we can
handle all corner cases such as -td or --detach=false.
Second, preserve the root args with --new. They are used for all podman
commands in the unit file. (e.g. podman --root /tmp run alpine)
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When adding the HOSTNAME environment variable, only do so if it
is not already present in the spec. If it is already present, it
was likely added by the user, and we should honor their requested
value.
Fixes#8886
Signed-off-by: Matthew Heon <mheon@redhat.com>
`KillMode=none` has been deprecated in systemd and is now throwing big
warnings when being used. Users have reported the issues upstream
(see #8615) and on the mailing list.
This deprecation was mainly motivated by an abusive use of third-party
vendors causing all kinds of undesired side-effects. For instance, busy
mounts that delay reboot.
After talking to the systemd team, we came up with the following plan:
**Short term**: we can use TimeoutStopSec and remove KillMode=none which
will default to cgroup.
**Long term**: we want to change the type to sdnotify. The plumbing for
Podman is done but we need it for conmon. Once sdnotify is working, we
can get rid of the pidfile handling etc. and let Podman handle it.
Michal Seklatar came up with a nice idea that Podman increase the time
out on demand. That's a much cleaner way than hard-coding the time out
in the unit as suggest in the short-term solution.
This change is executing the short-term plan and sets a minimum timeout
of 60 seconds. User-specified timeouts are added to that.
Fixes: #8615
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
so that the PIDFile can be accessed also without being in the rootless
user namespace.
Closes: https://github.com/containers/podman/issues/8506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
1.) podman cannot send proper dockerfile when it is not inside root
folder.
2.) support for sending symlinks and folders inside context dir
3.) when sending context dir as tar to remote, prevent sending items
inside .dockerignore
Signed-off-by: Kazım SARIKAYA <kazimsarikaya@sanaldiyar.com>
When running a privileged container and `SeccompProfilePath` is empty no seccomp profile should be applied.
(Previously this was the case only if `SeccompProfilePath` was set to a non-empty default path.)
Closes#8849
Signed-off-by: Max Goltzsche <max.goltzsche@gmail.com>
when HostNetwork is true in the pod spec.
Also propagate whether host network namespace should be used for containers.
Add test for HostNetwork setting in kubeYaml.
The infra configuration should reflect the setting.
Signed-off-by: Benedikt Ziemons <ben@rs485.network>
when neither yaml.Args nor yaml.Command are specified, we should use the entrypoint and cmd from the image.
update the tests to cover this and another case (both args and command are specified).
use the registry image instead of redis, as it has both an entrypoint and command specified.
update the documentation around this handling to hopefully prevent regressions and confusion.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
With additional stores there is a risk that you could have
multiple images with the same name. IE An older image in a
read/only store versus a newer version in the read/write store.
This patch will ignore multiple images with the same name iff
one is read/write and all of the others are read/only.
Fixes: https://github.com/containers/podman/issues/8176
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
adds the ability to filter containers based on the filter "pod". the
value can be a pod name or its full or partial id.
Fixes: #8512
Signed-off-by: baude <bbaude@redhat.com>
This change was missed in pull/8689. Now that volume pruneing supports
filters system pruneing can pass its filters down to the volume
pruneing. Additionally this change adds tests for the following components
* podman system prune subcommand with `--volumes` & `--filter` options
* apiv2 api tests for `/system/` and `/libpod/system` endpoints
Relates to #8453, #8672
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Implement `podman-remote cp` and break out the logic from the previously
added `pkg/copy` into it's basic building blocks and move them up into
the `ContainerEngine` interface and `cmd/podman`.
The `--pause` and `--extract` flags are now deprecated and turned into
nops.
Note that this commit is vendoring a non-release version of Buildah to
pull in updates to the copier package.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
`podman network create` should always add a gateway to the cni config.
If no gateway is given use the first ip in the subnet. CNI does not require
the gateway field but we need it because of network inspect.
This worked with previous version but was dropped in Commit(e7a72d72fd).
Fixes#8748
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
These tests simply will not work under these conditions.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
When running as rootless, on a CgroupV1 host these tests all report:
`Error: pod stats is not supported in rootless mode without cgroups v2`
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
This should be addressed by PR
https://github.com/containers/podman/pull/8685
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
Nearly/all of the 'podman stats' tests fail on Fedora when
executing testing inside a container, and CGroupsV1 is used on the
host. The typical failure message is of the form `Error: unable to
load cgroup at /machine.slice/.../: cgroup deleted`.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
These tests fail with `Error: opening file `io.bfq.weight` for writing:
Permission denied: OCI permission denied`. Upon examination of the
VMs, it was found the kernel and OS lacks support for the `BFQ`
scheduler (which supplies the `weight` option). The only available
schedulers are `none` and `mq-deadline`.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
chenkang
OpenShift Merge Robot
Peter Hunt
Paul Holzinger
zhangguanzhang
Eduardo Vega
baude
Daniel J Walsh
Matthew Heon
Alban Bedel
Jordan Christiansen
Matthew Heon
TomSweeneyRedHat
Jordan Williams
Giuseppe Scrivano
Valentin Rothberg
Jakub Guzik
Ashley Cui
Parker Van Roy
Steven Taylor
Matej Vasek
Jhon Honce
bitstrings
Milivoje Legenovic
Alexandre Fourcat
unknown
Radostin Stoyanov
Kazım SARIKAYA
Max Goltzsche
Hironori Shiina
Benedikt Ziemons
Josh Soref
Baron Lenardson
Chris Evich