Clarifies the behavior of --interactive in both attached and unattached
scenarios.
Adds a caveat and explanation for --interactive being hungry as
described in https://github.com/containers/podman/issues/24370.
Signed-off-by: Alicia Boya García <aboya@igalia.com>
This fixes two problems, first if a port is published and exposed it
should not be shown twice. It is enough to show the published one.
Second, if there is a huge range the ports were no grouped causing the
output to be unreadable basically. Now we group exposed ports like we do
with the normal published ports.
Fixes#23317
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This can never included a comma in the protocol so it just complicated
things for no reason, we never needed this and commit edc3dc5e11 already
ensures this cannot happen.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
There is no good reason for the special case, kube and pod units
definitely need it. Volume and network units maybe not but for
consistency we add it there as well. This makes the docs much easier to
write and understand for users as the behavior will not differ.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
As documented in the issue there is no way to wait for system units from
the user session[1]. This causes problems for rootless quadlet units as
they might be started before the network is fully up. TWhile this was
always the case and thus was never really noticed the main thing that
trigger a bunch of errors was the switch to pasta.
Pasta requires the network to be fully up in order to correctly select
the right "template" interface based on the routes. If it cannot find a
suitable interface it just fails and we cannot start the container
understandingly leading to a lot of frustration from users.
As there is no sign of any movement on the systemd issue we work around
here by using our own user unit that check if the system session
network-online.target it ready.
Now for testing it is a bit complicated. While we do now correctly test
the root and rootless generator since commit ada75c0bb8 the resulting
Wants/After= lines differ between them and there is no logic in the
testfiles themself to say if root/rootless to match specifics. One idea
was to use `assert-key-is-rootless/root` but that seemed like more
duplication for little reason so use a regex and allow both to make it
pass always. To still have some test coverage add a check in the system
test to ask systemd if we did indeed have the right depdendencies where
we can check for exact root/rootless name match.
[1] https://github.com/systemd/systemd/issues/3312Fixes#22197
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Prior to this commit, many scp functions existed without option structs, which would make extending functionality (adding new options) impossible without breaking changes, or without adding redundant wrapper functions.
This commit adds in new option types for various scp related functions, and changes those functions' signatures to use the new options.
This commit also modifies the `ImageEngine.Scp()` function's interface to use the new opts.
The commit also renames the existing `ImageScpOptions` entity type to `ScpTransferImageOptions`. This is because the previous `ImageScpOptions` was inaccurate, as it is not the actual options for `ImageEngine.Scp()`. `ImageEngine.Scp()` should instead receive `ImageScpOptions`.
This commit should not change any behavior, however it will break the existing functions' signatures.
Signed-off-by: Zachary Hanham <z.hanham00@gmail.com>
since the effect would be to lower the rlimits when their definition
is higher than the default value.
The test doesn't fail on the previous version, unless the system is
configured with a nofile ulimit higher than the default value.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2317721
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When we are activated by systemd the code assumed that we had a valid
URL which was not the case so it failed to parse the URL which causes
the info call to fail all the time.
This fixes two problems first add the schema to the systemd activated
listener URL so it can be parsed correctly but second simply do not
parse it as url as all we care about in the info call is if it is unix
and the file path exists.
Fixes#24152
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This commit was automatically cherry-picked
by buildah-vendor-treadmill v0.3
from the buildah vendor treadmill PR, #13808
* Fix conflict caused by Ed's local-registry PR in buildah
* Wire in "new" --retry and --retry-delay, these existed for longer
but where non functional.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Change getUnitDirs to maintain a slice in addition to the map and return the slice
Add helper functions to make the code more readable
Adjust unit tests
Restore system test
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
These flags can affect the output of the HealtCheck log. Currently, when a container is configured with HealthCheck, the output from the HealthCheck command is only logged to the container status file, which is accessible via `podman inspect`.
It is also limited to the last five executions and the first 500 characters per execution.
This makes debugging past problems very difficult, since the only information available about the failure of the HealthCheck command is the generic `healthcheck service failed` record.
- The `--health-log-destination` flag sets the destination of the HealthCheck log.
- `none`: (default behavior) `HealthCheckResults` are stored in overlay containers. (For example: `$runroot/healthcheck.log`)
- `directory`: creates a log file named `<container-ID>-healthcheck.log` with JSON `HealthCheckResults` in the specified directory.
- `events_logger`: The log will be written with logging mechanism set by events_loggeri. It also saves the log to a default directory, for performance on a system with a large number of logs.
- The `--health-max-log-count` flag sets the maximum number of attempts in the HealthCheck log file.
- A value of `0` indicates an infinite number of attempts in the log file.
- The default value is `5` attempts in the log file.
- The `--health-max-log-size` flag sets the maximum length of the log stored.
- A value of `0` indicates an infinite log length.
- The default value is `500` log characters.
Add --health-max-log-count flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-max-log-size flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Add --health-log-destination flag
Signed-off-by: Jan Rodák <hony.com@seznam.cz>
Modify `RemoveConnections` to verify the new default system connection's
rootful state matches the rootful-ness of the podman machine it is associated
with.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Moves the `DefaultMachineName` constant out of `pkg/machine` and into
`pkg/machine/define`.
Signed-off-by: Jake Correnti <jakecorrenti+github@proton.me>
Use os.ReadDir recursively instead of filepath.WalkDir
Use map instead of list to easily find looped Symlinks
Update existing tests and add a more elaborate one
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
* podman manifest remove doesn't accept references as descriptions of
what to remove from a list or index; only use digests in the man page
* podman manifest remove only removes one thing at a time; correct the
man page examples
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
There is no point in logging them, the directories not existing is fine
and expected and logging these by default when useing -dryrun just
causes confusion.
Fixes#23620
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When you sort by repository a user most likely also want the tags to be
sorted as well. At the very least to get a stable output as the order
could be changed pull podman tag/pull even if they keep using the same
tag name.
Fixes#23803
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The kube generate command can now generate a yaml for
the Job kind and the kube play command can create a pod
and containers with podman when passed in a Job yaml.
Add relevant tests and docs for this.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
Podman machine list now supports a new option, --all-providers, which lists all machines from all providers.
Signed-off-by: Ashley Cui <acui@redhat.com>
The podman container cleanup process runs asynchronous and by the time
it gets the lock it is possible another podman process already did the
cleanup and then did a new init() to start it again. If the cleanup
process gets the lock there it will cause very weird things.
This can be observed in the remote start API as CI flakes.
Fixes#23754
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When we use passthrough logging and the --rmi option should not try to
delete the image right away. Simply speak passthough only means do not
print the cotnainer id but we should never try to delete the image here
as this will be done in the cleanup process.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Since commit 458ba5a8af the cleanup process now removes the image as
well, thus the removal is racy and it will cause an error here.
The code tried to ignore the error with errors.Is() but this never works
across the remote API. However the API already has a ignore option so
juts use that and fix the error message so that we can easily find the
root cause and I do not have to guess where the log was written.
Fixes#23719
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This started off as an attempt to make `podman stop` on a
container started with `--rm` actually remove the container,
instead of just cleaning it up and waiting for the cleanup
process to finish the removal.
In the process, I realized that `podman run --rmi` was rather
broken. It was only done as part of the Podman CLI, not the
cleanup process (meaning it only worked with attached containers)
and the way it was wired meant that I was fairly confident that
it wouldn't work if I did a `podman stop` on an attached
container run with `--rmi`. I rewired it to use the same
mechanism that `podman run --rm` uses, so it should be a lot more
durable now, and I also wired it into `podman inspect` so you can
tell that a container will remove its image.
Tests have been added for the changes to `podman run --rmi`. No
tests for `stop` on a `run --rm` container as that would be racy.
Fixes#22852
Fixes RHEL-39513
Signed-off-by: Matt Heon <mheon@redhat.com>
The new golangci-lint version 1.60.1 has problems with typecheck when
linting remote files. We have certain pakcages that should never be
inlcuded in remote but the typecheck tries to compile all of them but
this never works and it seems to ignore the exclude files we gave it.
To fix this the proper way is to mark all packages we only use locally
with !remote tags. This is a bit ugly but more correct. I also moved the
DecodeChanges() code around as it is called from the client so the
handles package which should only be remote doesn't really fit anyway.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rootless units placed in `users` would be loaded for root when
`/etc/containers/systemd` is a symlink. In this case, since
`UnitDirAdmin` is hardcoded, `userLevelFilter` always returns `true`.
If `/etc/containers/systemd/users` is a symlink, any user would load
other users' units.
Fix the above two problems.
Fixes: #23483
Signed-off-by: Uzinn Kagurazaka <uzinn.kagurazaka@11555511.xyz>
Add support for the ServiceName key for all unit types
Extend the PodInfo struct into UnitInfo to consolidate all prepopulated data into a single map
Use the NodesInfo map instead of the resourceName
Update the UnitInfo in the convert function instead of returning it
No need to replace extension anymore just remove it
All e2e tests with dependencies on other Quadlet files moved to a separate section
Add the capability of overriding the service name in the test
Add e2e tests for the new functionality
Adjust integration tests
Update the MAN page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Fixes: e62c928642 ("Make podman-compose refer to podman-compose(1) when using an external provider")
- test: add coverage for PODMAN_COMPOSE_WARNING_LOGS
Signed-off-by: Petter Mikkelsen <43xhyr9m@anonaddy.me>
Using the ExactArgs(1) function is better because we have less
duplication of the error text and the ValidArgsFunction uses that to
suggest shell completion. The command before this commit would suggest
connection names even if there was already one arg on the cli set.
However because there is the --all option we still must exclude that
first.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Change the warning message at runtime to refer to the man page of podman-compose instead of "the documentation"
Add instructions in the man page on how to disable the warning emitted by podman-compose when using an external compose provider
Signed-off-by: marinmo <bugzilla@marinmo.org>
The events code makes use of two channels, one for the events and one
for the resulting error. Then in the main file we have a loop reading
from both channels that should exit on first error it gets.
However in case the event channel is closed before the error channel
cotains the error it could caused an early exit as it looked like all
events were done. Commit c46884aa93 fixed that somewhat by checking for
an error in the error channel before exiting. This however was still
racy as it added a default case in the select which means the channel
check is non blocking. Thus the error was not yet send into the channel.
To fix this we should make it a blocking read to wait for the error in
the channel. Also the err != nil check can be removed as we either
return err or nil anyway.
And as last step make sure the error channel is closed, that prevents us
from blocking forever in case the main select already processed the nil
error.
Fixes#23165
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The driver is now hardcoded again, and there can only be
one type of mounts at a time (which one changes over time)
Revert "Make it possible to select the volume driver"
This reverts commit 6630e5cf66.
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Close loophole that would allow you to assign more memory than the
system has to a podman machine
Fixes: #18206
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman machine reset now removes and resets machines from all providers availabe on the platform.
On windows, if the user is does not have admin privs, machine will only reset WSL, but will emit a warning that it is unable to remove hyperV machines without elevated privs.
Signed-off-by: Ashley Cui <acui@redhat.com>
When the user specifies a Containerfile or Dockfile with the -f flag in podman build, if the file does not exist, the error should be intuitive to the user.
Fixed: #22940
Signed-off-by: Kevin Cui <bh@bugs.cc>
The pod was set after we checked the namespace and the namespace code
only checked the --pod flag but didn't consider --pod-id-file option.
As such fix the check to first set the pod option on the spec then use
that for the namespace. Also make sure we always use an empty default
otherwise it would be impossible in the backend to know if a user
requested a specific userns or not, i.e. even in case of a set
PODMAN_USERNS env a container should still get the userns from the pod
and not use the var in this case. Therefore unset it from the default
cli value.
There are more issues here around --pod-id-file and cli validation that
does not consider the option as conflicting with --userns like --pod
does but I decided to fix the bug at hand and don't try to fix the
entire mess which most likely would take days.
Fixes#22931
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When a user specifies a invalid connection in CONTAINER_CONNECTION then
podman should return a proper error saying so. Currently it ignored the
error and in rootFlags() just exited early with defining any flags. This
caused a panic then when trying to use the flags later.
In order to address this first store the connection error in the
PodmanConfig struct and not abort right away during flag setup. This is
important as the user might have specified a flag with a valid remote
connection. As such we check all flags and only when none were given we
return the connection error.
Also while at it I noticed that the default connection reported via
podman --help was wrong as it only used the old containers.conf field
for it and did not consider the podman-connections.json default.
New regression tests have been added to make sure it behaves correctly.
This fixes the problem reported in the PR #22997.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
add a new flag that allows to override the pull options configured in
the storage.conf file.
e.g.: --pull-option="enable_partial_images=false" can be specified to
Podman to disable partial pulls even if enabled.
Leave it as a hidden configuration flag for now since the API itself
is marked as experimental in c/storage.
Currently c/storage doesn't honor the overrides, being fixed with
https://github.com/containers/storage/pull/1966
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This is the same as what --squash-all is doing, and we already support
--squash with --layers=true since this is the default.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Testing `podman system check` requires that we have a way to
intentionally introduce storage corruptions. Add a hidden `podman
testing` command that provides the necessary internal logic in
subcommands. Stub out the tunnel implementation for now.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Add a `podman system check` that performs consistency checks on local
storage, optionally removing damaged items so that they can be
recreated.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
The expectation with --cgroups=disabled is that the current cgroup is
used by the container.
Currently the --cgroups=disabled is passed directly to the OCI
runtime, but it doesn't stop Podman from creating a new cgroup when it
doesn't own the current one.
Closes: https://github.com/containers/podman/issues/20910
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
Use the configuration parameters from the newly introduced
PodmanshConfig struct. This allows podmansh to be configured via
configuration files.
Signed-off-by: phoenix <felix.niederwanger@suse.com>
The function that's handing us events will return an error after closing
the channel over which it's sending events, and its caller (in its own
goroutine) will then send that error over another channel.
The logic that started the goroutine is likely to notice that the events
channel is closed before noticing that the error channel has a result
for it to read, so any error that would have been communicated would be
lost.
When we finish reading events, check if the reader returned an error
before telling our caller that there was no error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Alicia Boya García
Paul Holzinger
openshift-merge-bot[bot]
Zachary Hanham
Giuseppe Scrivano
Ed Santiago
Sainath Sativar
Ygal Blum
Jan Rodák
Jake Correnti
Nalin Dahyabhai
Jerome Degroote
Paul Wright
Paul Wright
Daniel J Walsh
flouthoc
Urvashi Mohnani
Mikel Olasagasti Uranga
Ashley Cui
Misaki Kasumi
Matt Heon
Chad Dougherty
Uzinn Kagurazaka
tomsweeneyredhat
Petter Mikkelsen
benniekiss
Anders F Björklund
marinmo
Brent Baude
Kevin Cui
miyamo2
Johannes Maibaum
jkwiatko
phoenix
Shion Tanaka
qianxi0410
Florian Wickert