Changes include: Containerfile by default, add --device flags to bud, allow buildah bud to be called without
arguments, and a couple of small typo corrections.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
adding podman network and the subcommands inspect, list, and rm. the
inspect subcommand displays the raw cni network configuration. the list
subcommand displays a summary of the cni networks ala ps. and the rm
subcommand removes a cni network.
Signed-off-by: baude <bbaude@redhat.com>
Add warnings/work arounds about NFS and OverlayFS to the troubleshooting guide
and also the main podman page. Verified that these warnings are on the rootless
page already.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
We need this specifically for tests, but others may find it
useful if they don't explicitly need events and don't want the
performance implications of using them.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Logging messages from the dependency libraries should not log onto the
screen when using the remote client. This patch writes logging to
~/.config/containers/podman-remote.log
Fixes#3299
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Currently we report cgroupmanager default as systemd, even if the user modified
the libpod.conf. Also cgroupmanager does not work in rootless mode. This
PR correctly identifies the default cgroup manager or reports it is not supported.
Also add homeDir to correctly get the homedir if the $HOME is not set. Will
attempt to get Homedir out of /etc/passwd.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
A quick follow up to #3306 to touch up two more
'container command' to 'contained command' to match the
rest of the doc suite.
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
This command lets the user run a command in a new user namespace like `unshare -u`.
It uses the implementation of unshare in buildah. ( fixes#1388 )
Signed-off-by: Divyansh Kamboj <kambojdivyansh2000@gmail.com>
As part of this, rework the number of workers used by various
Podman tasks to match original behavior - need an explicit
fallthrough in the switch statement for that block to work as
expected.
Also, trivial change to Podman cleanup to work on initialized
containers - we need to reset to a different state after cleaning
up the OCI runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Seems like we have some old references to crio man pages left
over in the docs, since we don't mention crio in man pages
we should not be referencing the man page in the see-also.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
libpod.conf defaults to /usr/share/containers/libpod.conf.
Clarify how administrators can override it and the location
of the users version for rootless mode.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
podman-generate and -play had the wrong NAMEs.
podman-restart and -volume-prune the wrong SYNOPSIS.
All the rest are varying degrees of minor:
- missing a space between the NAME and description
- multi-line SYNOPSIS that could be collapsed into one
- use of UPPER CASE in synopsis instead of *asterisks*
- improper use of **double asterisks** for options
- varlink and version were transposed in podman-1
- fixed inconsistencies between the description in
the man page and that in the parent manpage. These
are too numerous for me to fix all.
Added: script that could be used in CI to prevent future
such inconsistencies. It cannot be enabled yet because
there are still 35+ inconsistencies in need of cleaning.
This will be difficult to review on github. I suggest
pulling the PR and running 'git log -1 -p | cdif | less'
'cdif' is a handy tool for colorizing individual diffs between
lines:
http://kaz-utashiro.github.io/cdif/
There are other such tools; use your favorite. Comparing
without visual highlights may be painful.
I also encourage you to run hack/man-page-checker and suggest
more fixes for the problems it's finding.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Also: enforce noSubArgs for podman events
Also: remove unnecessary '[flags]' from Use message (Cobra
adds it automatically)
Signed-off-by: Ed Santiago <santiago@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
...caught by hack/podman-commands.sh script. Which had a little
buglet, which I fixed: add a special case for 'help', which
neither has nor needs a man page.
I believe the podman-commands.sh script is ready to be run in CI,
hint hint.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Found via:
for i in docs/*.md;do x=$(perl -ne 'if (/\[(podman-.*?)\(1\)\]\((podman-.*?)\.1\.md/) { print " $1 != $2\n" if $1 ne $2; print " ENOENT $2\n" unless -e "docs/$2.1.md" }' <$i); if [ -n "$x" ]; then echo $i; echo "$x";fi;done
...which is probably a good candidate for another CI hook,
except I have no idea how to rewrite it in awk.
Additionally, mark `podman refresh` and `podman container refresh`
as hidden, remove its man page, and remove references to it from
all other man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
iFix builtin volumes to work with podman volume
Currently builtin volumes are not recored in podman volumes when
they are created automatically. This patch fixes this.
Remove container volumes when requested
Currently the --volume option on podman remove does nothing.
This will implement the changes needed to remove the volumes
if the user requests it.
When removing a volume make sure that no container uses the volume.
Signed-off-by: Daniel J Walsh dwalsh@redhat.com
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are missing the equivalence of the docker system commands
This patch set adds `podman system prune`
and `podman system info`
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Rework the Podman Description. I'm starting off with the Podman man page
to build consensus and we can then add to other places as appropriate.
This partially addresses: #1636
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
we can define multiple OCI runtimes that can be chosen with
--runtime.
in libpod.conf is possible to specify them with:
[runtimes]
foo = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
bar = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
If the argument to --runtime is an absolute path then it is used
directly without any lookup in the configuration.
Closes: https://github.com/containers/libpod/issues/1750
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
There's been a lot of discussion over in [1] about how to support the
NVIDIA folks and others who want to be able to create devices
(possibly after having loaded kernel modules) and bind userspace
libraries into the container. Currently that's happening in the
middle of runc's create-time mount handling before the container
pivots to its new root directory with runc's incorrectly-timed
prestart hook trigger [2]. With this commit, we extend hooks with a
'precreate' stage to allow trusted parties to manipulate the config
JSON before calling the runtime's 'create'.
I'm recycling the existing Hook schema from pkg/hooks for this,
because we'll want Timeout for reliability and When to avoid the
expense of fork/exec when a given hook does not need to make config
changes [3].
[1]: https://github.com/opencontainers/runc/pull/1811
[2]: https://github.com/opencontainers/runc/issues/1710
[3]: https://github.com/containers/libpod/issues/1828#issuecomment-439888059
Signed-off-by: W. Trevor King <wking@tremily.us>
Part of the motivation for 800eb863 (Hooks supports two directories,
process default and override, 2018-09-17, #1487) was [1]:
> We only use this for override. The reason this was caught is people
> are trying to get hooks to work with CoreOS. You are not allowed to
> write to /usr/share... on CoreOS, so they wanted podman to also look
> at /etc, where users and third parties can write.
But we'd also been disabling hooks completely for rootless users. And
even for root users, the override logic was tricky when folks actually
had content in both directories. For example, if you wanted to
disable a hook from the default directory, you'd have to add a no-op
hook to the override directory.
Also, the previous implementation failed to handle the case where
there hooks defined in the override directory but the default
directory did not exist:
$ podman version
Version: 0.11.2-dev
Go Version: go1.10.3
Git Commit: "6df7409cb5a41c710164c42ed35e33b28f3f7214"
Built: Sun Dec 2 21:30:06 2018
OS/Arch: linux/amd64
$ ls -l /etc/containers/oci/hooks.d/test.json
-rw-r--r--. 1 root root 184 Dec 2 16:27 /etc/containers/oci/hooks.d/test.json
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:31:19-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:31:19-08:00" level=warning msg="failed to load hooks: {}%!(EXTRA *os.PathError=open /usr/share/containers/oci/hooks.d: no such file or directory)"
With this commit:
$ podman --log-level=debug run --rm docker.io/library/alpine echo 'successful container' 2>&1 | grep -i hook
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /usr/share/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="reading hooks from /etc/containers/oci/hooks.d"
time="2018-12-02T21:33:07-08:00" level=debug msg="added hook /etc/containers/oci/hooks.d/test.json"
time="2018-12-02T21:33:07-08:00" level=debug msg="hook test.json matched; adding to stages [prestart]"
time="2018-12-02T21:33:07-08:00" level=warning msg="implicit hook directories are deprecated; set --hooks-dir="/etc/containers/oci/hooks.d" explicitly to continue to load hooks from this directory"
time="2018-12-02T21:33:07-08:00" level=error msg="container create failed: container_linux.go:336: starting container process caused "process_linux.go:399: container init caused \"process_linux.go:382: running prestart hook 0 caused \\\"error running hook: exit status 1, stdout: , stderr: oh, noes!\\\\n\\\"\""
(I'd setup the hook to error out). You can see that it's silenly
ignoring the ENOENT for /usr/share/containers/oci/hooks.d and
continuing on to load hooks from /etc/containers/oci/hooks.d.
When it loads the hook, it also logs a warning-level message
suggesting that callers explicitly configure their hook directories.
That will help consumers migrate, so we can drop the implicit hook
directories in some future release. When folks *do* explicitly
configure hook directories (via the newly-public --hooks-dir and
hooks_dir options), we error out if they're missing:
$ podman --hooks-dir /does/not/exist run --rm docker.io/library/alpine echo 'successful container'
error setting up OCI Hooks: open /does/not/exist: no such file or directory
I've dropped the trailing "path" from the old, hidden --hooks-dir-path
and hooks_dir_path because I think "dir(ectory)" is already enough
context for "we expect a path argument". I consider this name change
non-breaking because the old forms were undocumented.
Coming back to rootless users, I've enabled hooks now. I expect they
were previously disabled because users had no way to avoid
/usr/share/containers/oci/hooks.d which might contain hooks that
required root permissions. But now rootless users will have to
explicitly configure hook directories, and since their default config
is from ~/.config/containers/libpod.conf, it's a misconfiguration if
it contains hooks_dir entries which point at directories with hooks
that require root access. We error out so they can fix their
libpod.conf.
[1]: https://github.com/containers/libpod/pull/1487#discussion_r218149355
Signed-off-by: W. Trevor King <wking@tremily.us>
Need to return an error pointing user in right direction if rootless podman
fails, because of no /etc/subuid or /etc/subgid files.
Also fix up man pages to better describe rootless podman.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
If fuse-overlayfs is present, rootless containers default to use it.
This can still be overriden either via the command line with
--storage-driver or in the ~/.config/containers/storage.conf
configuration file.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
ALso cleanup files section or podman man page
Add description of policy.json
Sort alphabetically.
Add more info on oci hooks
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1487
Approved by: umohnani8
Base heading is level 2, which is identical to the level 1. However
level 3 will be indendet which is used a lot in the `## EXAMPLES`
sections.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1375
Approved by: rhatdan
Add a containers-mounts.conf(5) manpage. The mounts.conf is used by
other tools (e.g., CRI-O) as well. A dedicated manpage reduces
redundancy.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1350
Approved by: rhatdan
Use the "containers-" prefix for all references to the
containers-registries.conf and containers-storage.conf
configuration files.
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Closes: #1350
Approved by: rhatdan
Default settings for storage can be overriden by setting these environment
variables.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Closes: #1282
Approved by: mheon
Better explain the inner workings of both state types in comments
to make reviews and changes easier.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
TomSweeneyRedHat
Ryan Whalen
Tomas Tomecek
baude
Matthew Heon
OpenShift Merge Robot
Jhon Honce
Petr Vaněk
Daniel J Walsh
Ashley Cui
Marcus Müller
Divyansh Kamboj
Ed Santiago
Giuseppe Scrivano
W. Trevor King
Paul W. Frields
Valentin Rothberg
Matthew Heon