This option causes Podman to not only remove the specified containers
but all of the containers that depend on the specified
containers.
Fixes: https://github.com/containers/podman/issues/10360
Also ran codespell on the code
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We are seeing some issues with users not understanding which VM they are
starting, and if the VM takes a long time to start, they do not know
where to look.
Moving the name to before the VM starts at least allows them to realize
they are starting the wrong VM.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Remove hard code use of the DefaultInfraImage and rely on
getting this from containers.conf.
Fixes: https://github.com/containers/podman/issues/12771
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
this commit fixes two bugs and adds regression tests.
when getting healthcheck values from an image, if the image does not
have a timeout defined, this resulted in a 0 value for timeout. The
default as described in the man pages is 30s.
when inspecting a container with a healthcheck command, a customer
observed that the &, <, and > characters were being converted into a
unicode escape value. It turns out json marshalling will by default
coerce string values to ut8.
Fixes: bz2028408
Signed-off-by: Brent Baude <bbaude@redhat.com>
Add the --ipv6 flag to podman create/run and pod create. We support the
--network name:ip6=<ip> syntax now but for docker compat we should also
support the --ip6 flag.
Note that there is no validation if the ip is actually a v6 or v4 address
because the backend does not care either.
Fixes#7511
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Use the same type of mounts for all the machine volumes.
The default could change in the future, depending on OS.
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Allow using the built-in 9pfs feature of qemu,
mounting host directories into vm mountpoints.
The volumes are generic, the mounts are specific.
Wait for the machine to be "running", otherwise
the SSH function might throw an error instead.
Increase the default msize from 8 KiB to 128 KiB
[NO NEW TESTS NEEDED]
Signed-off-by: Anders F Björklund <anders.f.bjorklund@gmail.com>
Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
Podman image scp should never enter the Podman UserNS unless it needs to. This allows for
a sudo exec.Command to transfer images to and from rootful storage. If this command is run using sudo,
the simple sudo podman save/load does not work, machinectl/su is necessary here.
This modification allows for both rootful and rootless transfers, and an overall change of scp to be
more of a wrapper function for different load and save calls as well as the ssh component
Signed-off-by: cdoern <cdoern@redhat.com>
Some containers require certain user account(s) to exist within the
container when they are run. This option will allow callers to add a
bunch of passwd entries from the host to the container even if the
entries are not in the local /etc/passwd file on the host.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935831
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
CRIU's pre-copy migration support relies on the soft dirty page tracking
in the Linux kernel:
https://www.kernel.org/doc/Documentation/vm/soft-dirty.txt
This functionality is not implemented for all architectures and it can
also be turned off in the kernel.
CRIU can check if the combination of architecture/kernel/CRIU supports
the soft dirty page tracking and exports this feature checking
functionality in go-criu.
This commit adds an early check if the user selects pre-copy
checkpointing to error out if the system does not support it.
Signed-off-by: Adrian Reber <areber@redhat.com>
Fixes#11089 - cleanup PATH on MSI uninstall
Additionally fixes scenarios where the path can be overwritten by setx
Also removes the console flash, since the helper is built as a silent gui
Helper executable can be rerun by user to repair PATHs broken by other tools
Utilizes executable location instead of passed parameters to remove delicate escaping requirements
[NO NEW TESTS NEEDED]
Signed-off-by: Jason T. Greene <jason.greene@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
Podman does not relay exit code from buildah instead returns a generic
error code `125`. Following PR allows `podman` to relay exit code from
`imagebuildah` to `registry` as it is.
Signed-off-by: Aditya Rajan <arajan@redhat.com>
Added an option to podman machine init to declare the timezone of the
resulting machine. the default is to use the value of the host name or
else a given timezone name like America/Chicago.
Fixes: #11895
Signed-off-by: Brent Baude <bbaude@redhat.com>
[NO NEW TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Make sure that `kill -a` is printing the IDs of killed containers.
Previously, it was only printing empty lines.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We have to get the network ID from the network backend. With the
netavark backend we no longer use the sha from the name as ID.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Rework the --network parse logic to support multiple networks with
specific network configuration settings.
--network can now be set multiple times. For bridge network mode the
following options have been added:
- **alias=name**: Add network-scoped alias for the container.
- **ip=IPv4**: Specify a static ipv4 address for this container.
- **ip=IPv6**: Specify a static ipv6 address for this container.
- **mac=MAC**: Specify a static mac address address for this container.
- **interface_name**: Specify a name for the created network interface inside the container.
So now you can set --network bridge:ip=10.88.0.10,mac=44:33:22:11:00:99
for the default bridge network as well as for network names.
This is better than using --ip because we can set the ip per network
without any confusion which network the ip address should be assigned
to.
The --ip, --mac-address and --network-alias options are still supported
but --ip or --mac-address can only be set when only one network is set.
This limitation already existed previously.
The ability to specify a custom network interface name is new
Fixes#11534
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add the new networks format to specgen. For api users cni_networks is
still supported to make migration easier however the static ip and mac
fields are removed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Network connect now supports setting a static ipv4, ipv6 and mac address
for the container network. The options are added to the cli and api.
Fixes#9883
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The new network backend stores the networks in a map so the returned
order is not deterministic. Lets sort the network names alphabetically
to ensure a deterministic order.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2030599
When you create pod, it shares the UTS namespace with Containers.
Currently the --hostname is not passed to the pod created when
you create a container and pod in the same command.
Also fix error message on supported --share flags
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
[NO NEW TESTS NEEDED]
Support better compatibility output for podman pods commands
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
[NO NEW TESTS NEEDED]
Support better compatibility output for podman system commands
* Format and content of output from podman version changed to
be more compatible
See #10974
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Leverage new report.Formatter allowing better compatibility from
podman command output.
Follow on PR's will cover containers, etc.
See #10974
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Leverage new report.Formatter allowing better compatibility from
podman command output.
See #10974
See #12455
Depends on containers/common#831
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add a new flag to set the start timeout for a generated systemd unit.
To make naming consistent, add a new --stop-timeout flag as well and let
the previous --time map to it.
Fixes: #11618
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Daniel J Walsh
OpenShift Merge Robot
Brent Baude
Paul Holzinger
Anders F Björklund
cdoern
Jason T. Greene
Adrian Reber
Jason T. Greene
Aditya Rajan
Valentin Rothberg
Jakub Guzik
Jhon Honce
Ondra Machacek
Giuseppe Scrivano
Matej Vasek