Podman has, for a long time, had an internal concept of
dependency management, used mainly to ensure that pod infra
containers are started before any other container in the pod. We
also have the ability to recursively start these dependencies,
which we use to ensure that `podman start` on a container in a
pod will not fail because the infra container is stopped. We have
not, however, exposed these via the command line until now.
Add a `--requires` flag to `podman run` and `podman create` to
allow users to manually specify dependency containers. These
containers must be running before the container will start. Also,
make recursive starting with `podman start` default so we can
start these containers and their dependencies easily.
Fixes#9250
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
One of the side-effects of the `--userns=keep-id` command is
switching the default user of the container to the UID of the
user running Podman (though this can still be overridden by the
`--user` flag). However, it did this by setting the UID and GID
in the OCI spec, and not by informing Libpod of its intention to
switch users via the `WithUser()` option. Because of this, a lot
of the code that should have triggered when the container ran
with a non-root user was not triggering. In the case of the issue
that this fixed, the code to remove capabilities from non-root
users was not triggering. Adjust the keep-id code to properly
inform Libpod of our intention to use a non-root user to fix
this.
Also, fix an annoying race around short-running exec sessions
where Podman would always print a warning that the exec session
had already stopped.
Fixes#9919
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
For rootless users the infra container used the slirp4netns net mode
even when bridge was requested. We can support bridge networking for
rootless users so we have allow this. The default is not changed.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Add support for secretRef and secretKeyRef to allow env vars to be set
from a secret. As K8S secrets are dictionaries the secret value must
be a JSON dictionary compatible with the data field of a K8S secret
object. The keys must consist of alphanumeric characters, '-', '_'
or '.', and the values must be base64 encoded strings.
Signed-off-by: Alban Bedel <albeu@free.fr>
In K8S the pod creation fails if an env var reference a non existing
config map key. It can be marked as optional, but per default it is
mandatory. Podman on the other hand always treat such references as
optional.
Rework envVarsFrom() and envVarValue() to additionaly return an error
and add support for the optional attribute in configMapRef and
configMapKeyRef.
Signed-off-by: Alban Bedel <albeu@free.fr>
Rework envVarsFromConfigMap() and envVarValue() to simplify supporting
other env sources than config maps. For this we pass the whole spec
generator options struct as parameter instead of just the config maps
list. Then we rename envVarsFromConfigMap() to envVarsFrom() and in
envVarValue() we reposition the loop over the config maps to only run
it when a configMapRef element exists.
Signed-off-by: Alban Bedel <albeu@free.fr>
When kube play fails to create a volume, it should say which volume had
the problem so the user doesn't have to guess. For the following pod
spec:
apiVersion: v1
kind: Pod
metadata:
name: mypod
spec:
containers:
- name: myfrontend
image: nginx
volumeMounts:
- mountPath: "/var/www/html"
name: mypd
volumes:
- name: mypd
hostPath:
path: /var/blah
podman will now report:
Error: failed to create volume "mypd": error in parsing HostPath
in YAML: error checking path "/var/blah": stat /var/blah: no such
file or directory
Signed-off-by: Jordan Christiansen <xordspar0@gmail.com>
[NO TESTS NEEDED]
* When using the Namespace type, the field Value was json encoded
with the name "string" vs "value".
Signed-off-by: Jhon Honce <jhonce@redhat.com>
podman machine allows podman to create, manage, and interact with a vm
running some form of linux (default is fcos). podman is then configured
to be able to interact with the vm automatically.
while this is usable on linux, the real push is to get this working on
both current apple architectures in macos.
Ashley Cui contributed to this PR and was a great help.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
when --privileged is used, make sure to not request more capabilities
than currently available in the current context.
[NO TESTS NEEDED] since it fixes existing tests.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
We recieved an issue with an image that was built with
entrypoint=[""]
This blows up on Podman, but works on Docker.
When we setup the OCI Runtime, we should drop
entrypoint if it is == [""]
https://github.com/containers/podman/issues/9377
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Cleanup the golangci.yml file and enable more linters.
`pkg/spec` and `iopodman.io` is history. The vendor directory
is excluded by default. The dependencies dir was listed twice.
Fix the reported problems in `pkg/specgen` because that was also
excluded by `pkg/spec`.
Enable the structcheck, typecheck, varcheck, deadcode and depguard
linters.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
play kube function not respecting selinux options in kube yaml, all options were
being mapped to role.
fixes issue 8710
Signed-off-by: Steven Taylor <steven@taylormuff.co.uk>
We need an extra field in the pod infra container config. We may
want to reevaluate that struct at some point, as storing network
modes as bools will rapidly become unsustainable, but that's a
discussion for another time. Otherwise, straightforward plumbing.
Fixes#9165
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
when creating kubernetes yaml from containers and pods, we should honor
any custom dns settings the user provided. in the case of generate kube,
these would be provided by --dns, --dns-search, and --dns-opt. if
multiple containers are involved in the generate, the options will be
cumulative and unique with the exception of dns-opt.
when replaying a kube file that has kubernetes dns information, we now
also add that information to the pod creation.
the options for dnspolicy is not enabled as there seemed to be no direct
correlation between kubernetes and podman.
Fixes: #9132
Signed-off-by: baude <bbaude@redhat.com>
Make sure we pass the ip and mac address as CNI_ARGS to
the cnitool which is executed in the rootless-cni-infra
container.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
A container's workdir can be specified via the CLI via `--workdir` and
via an image config with the CLI having precedence.
Since images have a tendency to specify workdirs without necessarily
shipping the paths with the root FS, make sure that Podman creates the
workdir. When specified via the CLI, do not create the path, but check
for its existence and return a human-friendly error.
NOTE: `crun` is performing a similar check that would yield exit code
127. With this change, however, Podman performs the check and yields
exit code 126. Since this is specific to `crun`, I do not consider it
to be a breaking change of Podman.
Fixes: #9040
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
when using the compatibility api to create containers, now reflect the
use of k8s-file as json-file so that clients, which are
unaware of k8s-file, can work. specifically, if the container is using
k8s-file as the log driver, we change the log type in container
inspection to json-file. These terms are used interchangably in other
locations in libpod/podman.
this fixes log messages in compose as well.
[NO TESTS NEEDED]
Signed-off-by: baude <bbaude@redhat.com>
partially revert 95c45773d7
restrict the cases where /sys is bind mounted from the host.
The heuristic doesn't detect all the cases where the bind mount is not
necessary, but it is an improvement on the previous version where /sys
was always bind mounted for rootless containers unless --net none was
specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when using the bindings to *only* make a connection, the binary was
rough 28MB. This PR reduces it down to 11. There is more work to do
but it will come in a secondary PR.
Signed-off-by: baude <bbaude@redhat.com>
We now set Entrypoint when interpeting the image Entrypoint (or yaml.Command)
and Command when interpreting image Cmd (or yaml.Args)
This change is kind of breaking because now checking Config.Cmd won't return
the full command, but only the {cmd,args}.
Adapt the tests to this change as well
Signed-off-by: Peter Hunt <pehunt@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
`staticcheck` is a golang code analysis tool. https://staticcheck.io/
This commit fixes a lot of problems found in our code. Common problems are:
- unnecessary use of fmt.Sprintf
- duplicated imports with different names
- unnecessary check that a key exists before a delete call
There are still a lot of reported problems in the test files but I have
not looked at those.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This PR takes the settings from containers.conf and uses
them. This works on the podman local but does not fix the
issue for podman remote or for APIv2. We need a way
to specify optionalbooleans when creating containers.
Fixes: https://github.com/containers/podman/issues/8843
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Follow-up to commit (1ad796677e). The build on mips is still
failing because SIGWINCH was not defined in the signal pkg.
Also stat_t.Rdev is unit32 on mips so we need to typecast.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When I launch a container with --userns=keep-id the rootless processes
should have no caps by default even if I launch the container with
--privileged. It should only get the caps if I specify by hand the
caps I want leaked to the process.
Currently we turn off capeff and capamb, but not capinh. This patch
treats capinh the same way as capeff and capamb.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When adding the HOSTNAME environment variable, only do so if it
is not already present in the spec. If it is already present, it
was likely added by the user, and we should honor their requested
value.
Fixes#8886
Signed-off-by: Matthew Heon <mheon@redhat.com>
When running a privileged container and `SeccompProfilePath` is empty no seccomp profile should be applied.
(Previously this was the case only if `SeccompProfilePath` was set to a non-empty default path.)
Closes#8849
Signed-off-by: Max Goltzsche <max.goltzsche@gmail.com>
when HostNetwork is true in the pod spec.
Also propagate whether host network namespace should be used for containers.
Add test for HostNetwork setting in kubeYaml.
The infra configuration should reflect the setting.
Signed-off-by: Benedikt Ziemons <ben@rs485.network>
OpenShift Merge Robot
Matthew Heon
Paul Holzinger
Daniel J Walsh
Alban Bedel
Jordan Christiansen
Jhon Honce
baude
Giuseppe Scrivano
Jakub Guzik
Eduardo Vega
Valentin Rothberg
Ashley Cui
Steven Taylor
Matthew Heon
Max Goltzsche
Benedikt Ziemons