It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The e2e tests already depend on skopeo anyway and pulling a over 300
MB image is not helpful for flakes but most importantly we see ENOSPC
flakes. I see them around the skopeo test so I assume the big image is
pushing the tmpfs limits so other tests running in parallel can start
failing because of it.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Followup to #22270 : wherever possible/practical, extend command
error checks to include explicit exit status codes and error strings.
A small number of tests were broken, as in, not actually testing
what they claimed to be testing. I've done my best to fix those.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Most of them look like our usual "assume too much about run -d".
One of them is just an unexpected warning, a push retry. Remove
the ExitCleanly() from that test, just rely on Exit(0).
The other two have to do with podman logs, which we know can lag.
Add a short 1-second retry loop.
Signed-off-by: Ed Santiago <santiago@redhat.com>
fix an assumption in the test, that the --compression-format is
unchanged from the original image.
Instead validate that all the required architectures are part of the
manifest.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Too many tests use port 5000. Although there's a putative GetPortLock()
it seems to be unreliable, and we often get what appear to be collisions
between tests.
A proper solution would be to pseudorandomly allocate ports, verify
that they're not being reused, Sprintf() these everywhere that
needs them, and sprinkle some powdered cinnamon on top.
This is not that proper solution.
Fixes: #20655
Signed-off-by: Ed Santiago <santiago@redhat.com>
When we want the original image to be gzip, explicitly ask for that
instead of assuming the containers.conf defaults do that.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Commit 2 of 2: manual fixes to get tests to pass
Mostly adding "-q" to pull & push. In a few places that's
not possible, so revert to Exit(0) with stderr checks.
We do a *LOT* of image pulling! In a desperate attempt
to fix that, change some instances of ALPINE to CITEST_IMAGE.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Use `add_compression` field from `containers.conf` if found instead and
`CLI` field `--add-compression` is not set.
Signed-off-by: Aditya R <arajan@redhat.com>
... by updating for a c/common API change.
[NO NEW TESTS NEEDED]: Only moves unchanged code,
should not change behavior.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Value of `--force-compression` should be already `true` is
`--compression-format` is selected otherwise let users decide.
Signed-off-by: Aditya R <arajan@redhat.com>
Adds support for --force-compression which allows end-users to force
push blobs with the selected compresison in --compression option, in
order to make sure that blobs of other compression on registry are not
reused.
Signed-off-by: Aditya R <arajan@redhat.com>
Flake suppression: going with the one-basket model of egg storage,
switch manifest_test to use an image on quay.io (was: k8s.io).
Closes: #19148
Signed-off-by: Ed Santiago <santiago@redhat.com>
Adds support for --add-compression which accepts multiple compression
formats and when used it will add all instances in a manifest list with
requested compression formats.
Signed-off-by: Aditya R <arajan@redhat.com>
After[1] c/image no longer prints "Storing signatures" so we should
not check for it.
[1] https://github.com/containers/image/pull/2001
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
First: fix podman-registry script so it preserves the initial $PODMAN,
so all subsequent invocations of ps, logs, and stop will use the
same binary and arguments. Until now we've handled this by requiring
that our caller manage $PODMAN (and keep it the same), but that's
just wrong.
Next, simplify the golang interface: move the $PODMAN setting into
registry.go, instead of requiring e2e callers to set it. (This
could use some work: the local/remote conditional is icky).
IMPORTANT: To prevent registry.go from using the wrong podman binary,
the Start() call is gone. Only StartWithOptions() is valid now.
And, minor cleanup: comments, and add an actual error-message check
Reason for this PR is a recurring flake, #18355, whose multiple
failure modes I truly can't understand. I don't think this PR
is going to fix it, but this is still necessary work.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There is no reason to define the same code every time in each file, just
use global nodes. This diff should speak for itself.
CleanupSecrets()/Volume() no longer call Cleanup() directly, as the
global AfterEach node will always call Cleanup() this is no longer
necessary. If one AfterEach() node fails it will still run the others.
Also always unset the CONTAINERS_CONF env vars. This prevents people
from forgetting to unset it. And fix the special CONTAINERS_CONF logic
in the system connection tests, we do not want to preserve
CONTAINERS_CONF anyway so just remove this logic.
Ginkgo orders the BeforeEach and AfterEach nodes. They will be executed
from the outer-most defined to inner-most. This means our global
BeforeEach is always first. Only then the inner one (in the Describe()
function in each file). For AfterEach it is inverted, from the inner to
the outer.
Also see https://onsi.github.io/ginkgo/#organizing-specs-with-container-nodes
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
- fix a typo that was resulting in a test being a NOP, and
add actual testing to it.
- fix two Expects() with incorrectly-ordered actual/expects
- remove leading whitespace from an It() test name
- To(BeTrue()) is evil. Wherever possible, replace it with
useful string or field checks. When not possible, use
the annotation field to indicate what failed. I got
carried away here, #sorrynotsorry
- remove unused system-test code
Signed-off-by: Ed Santiago <santiago@redhat.com>
I found the ginkgolinter[1] by accident, this looks for not optimal
matching and suggest how to do it better.
Overall these fixes seem to be all correct and they will give much
better error messages when something fails.
Check out the repo to see what the linter reports.
[1] https://github.com/nunnatsa/ginkgolinter
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
This reverts commit 32f54a81ed.
`pkg/bindings` is supported outside of podman and we have to keep it
stable.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Package `io/ioutil` was deprecated in golang 1.16, preventing podman from
building under Fedora 37. Fortunately, functionality identical
replacements are provided by the packages `io` and `os`. Replace all
usage of all `io/ioutil` symbols with appropriate substitutions
according to the golang docs.
Signed-off-by: Chris Evich <cevich@redhat.com>
`os.ReadDir` was added in Go 1.16 as part of the deprecation of `ioutil`
package. It is a more efficient implementation than `ioutil.ReadDir`.
Reference: https://pkg.go.dev/io/ioutil#ReadDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
`podman-remote manifest push` has shown absolutely no progress at all.
Fix that by doing the same as the remote-push code does.
Like remote-push, `quiet` parameter is true by default for backwards
compatibility.
Signed-off-by: Naoto Kobayashi <naoto.kobayashi4c@gmail.com>
Also Fix usage of flag "--compression-format" for remote "podman image push". Fix usage of flags "--format", "--remove-signatures" in remote "podman manifest push".
Closes#15109.
Signed-off-by: Romain Geissler <romain.geissler@amadeus.com>
This bug is reproduced when we execute the following command:
1. podman manifest add <manifest list> <images exist on local storage>
2. podman manifest push --rm <manifest list> dir:<directory>
If pushing succeeds, it is expected to remove only a manifest list.
However, manifest list remains on local storage and images are removed.
This commit fixes `podman manifest push --rm` to remove only a manifest list.
And, supports `manifest push --rm option` in remote environment,
like host environment.
Fixes: https://github.com/containers/podman/issues/15033
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
I honestly do not understand all this extra option parsing here but
there is really no reason to exclude the option for remote, all the
other global options are also set there.
This fixes a problem with mixed cni/netavark use because the option was
unset.
Fixes#15017
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
...and enable the at-test-time confirmation, the one that
double-checks that if CI requests runc we actually use runc.
This exposed a nasty surprise in our setup: there are steps to
define $OCI_RUNTIME, but that's actually a total fakeout!
OCI_RUNTIME is used only in e2e tests, it has no effect
whatsoever on actual podman itself as invoked via command
line such as in system tests. Solution: use containers.conf
Given how fragile all this runtime stuff is, I've also added
new tests (e2e and system) that will check $CI_DESIRED_RUNTIME.
Image source: https://github.com/containers/automation_images/pull/146
Since we haven't actually been testing with runc, we need
to fix a few tests:
- handle an error-message change (make it work in both crun and runc)
- skip one system test, "survive service stop", that doesn't
work with runc and I don't think we care.
...and skip a bunch, filing issues for each:
- #15013 pod create --share-parent
- #15014 timeout in dd
- #15015 checkpoint tests time out under $CONTAINER
- #15017 networking timeout with registry
- #15018 restore --pod gripes about missing --pod
- #15025 run --uidmap broken
- #15027 pod inspect cgrouppath broken
- ...and a bunch more ("podman pause") that probably don't
even merit filing an issue.
Also, use /dev/urandom in one test (was: /dev/random) because
the test is timing out and /dev/urandom does not block. (But
the test is still timing out anyway, even with this change)
Also, as part of the VM switch we are now using go 1.18 (up
from 1.17) and this broke the gitlab tests. Thanks to @Luap99
for a quick fix.
Also, slight tweak to #15021: include the timeout value, and
reword message so command string is at end.
Also, fixed a misspelling in a test name.
Fixes: #14833
Signed-off-by: Ed Santiago <santiago@redhat.com>
Followup to #14845: use defer(), not fragile global context,
to stop registry and clean up temporary envariable. Thanks
to mitr for the suggestion.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Paul Holzinger
Ed Santiago
Giuseppe Scrivano
Miloslav Trmač
Matt Heon
Aditya R
OpenShift Merge Robot
Sohan Kunkerkar
Toshiki Sonoda
Chris Evich
Daniel J Walsh
Chris Evich
Eng Zer Jun
Vladimir Kochnev
Nalin Dahyabhai
Naoto Kobayashi
Romain Geissler