In order to allow pods to reach other pods (as in Kubernetes) they all
need to be added to the same network. A network is created (if it
doesn't exist) and pods created by play-kube are added to that network.
When network options are passed to kube command the pods are not
attached to the default kube network.
Signed-off-by: Andrei Natanael Cosma <andrei@intersect.ro>
Two different texts, split into two .md files. Nontrivial, but
still easy to review because the text is unchanged.
I was unable to reconcile either version with podman-build,
so that file remains with a separate version.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Tricky one. In particular: podman-kube-play did not enumerate
the "host" option; here I take the liberty of using it in the
common network.md, so it will appear in podman-kube-play.1.
If that is wrong, please tell me ASAP: I will need to un-refactor
podman-kube-play.
Other decisions:
* move the "invalid if" text to the bottom, because it can't
be shared between pod and container man pages.
* ditto for "together with --pod"
* kube-play said "Change the network mode of"; all the others
said ">SET< the network mode >FOR< ...". I chose the latter,
so that's what kube-play will have also. Again, if that's
wrong, please lmk.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Trivial one: no human intervention needed, the man page text
was already identical between both files.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Simple in reality, but hard to review due to lots of little diffs:
- "Logging driver specific options" was only in podman-run; I added it
to create and kube-play.
- whitespace changes, the 'e.g.'s got consistent 4-space indentation
- the "same keys" and "supported only" sentences, I moved up to be
closer to **tag** and without intervening whitespace, because they
were unclear as they were: I believe the intent is to apply those
sentences only to **tag**, not to the **--log-opt** option itself.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Another easy one. Option is only present in these three man pages.
I took the liberty of changing the "See note" text, making it
the same as --env. I also took the liberty of hyphenating
"line-delimited" because that's the correct thing to do.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only among podman create, exec, run. The same option in
podman build, generate-systemd, and secret-create is too
different.
Should be a trivial one to review, the only difference is
a period at the end of one sentence. And, of course, the
"See Environment note" applies only to podman-create and
run, not exec, so it can't be deduplicated.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Unusually, I discarded the podman-run version and went with
the one common to attach and start. (The defaults are left
out of the common file, because 'start' is different by
necessity). Please review extra-carefully to make sure
the new wording applies to podman-run, in particular
the "non-TTY mode" words.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Issue #15923 should have never happened: the problem should've
been autodetected. Make it so henceforth (and fix another
existing discrepancy)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Changes since 2022-09-09:
- man page: add --skip-unused-stages (buildah 4249)
- man page: bring in new Note for --cache-ttl (4248)
- system tests: de-stutter (4205)
- (internal): in skip() applier: escape asterisk, otherwise
the "bud with --dns* flags" sed expression never applies.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We added the concept of image volumes in 2.2.0, to support
inspecting an image from within a container. However, this is a
strictly read-only mount, with no modification allowed.
By contrast, the new `image` volume driver creates a c/storage
container as its underlying storage, so we have a read/write
layer. This, in and of itself, is not especially interesting, but
what it will enable in the future is. If we add a new command to
allow these image volumes to be committed, we can now distribute
volumes - and changes to them - via a standard OCI image registry
(which is rather new and quite exciting).
Future work in this area:
- Add support for `podman volume push` (commit volume changes and
push resulting image to OCI registry).
- Add support for `podman volume pull` (currently, we require
that the image a volume is created from be already pulled; it
would be simpler if we had a dedicated command that did the
pull and made a volume from it)
- Add support for scratch images (make an empty image on demand
to use as the base of the volume)
- Add UOR support to `podman volume push` and
`podman volume pull` to enable both with non-image volume
drivers
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add --label/-l label flag to secret create, and show labels when
inspecting secrets. Also allow labeling secrets via libpod/compat API.
Signed-off-by: Ashley Cui <acui@redhat.com>
Baby steps toward merging #14046: document Go format options
for podman events.
This is deliberately imperfect. I am not the right person
to document these. I am simply the person who is getting
a skeleton framework in place.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only between podman-build, create, and run. podman-pod-create
is too different.
As usual I went with the podman-run version. This means
keeping the word "flag" (which should be "option"), for
ease of review. I will fix in my in-progress cleanup PR.
For podman-build, I removed "during the build" and changed
it to a note for that man page only.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Alias
podman --context -> podman --connection
podman context use -> podman system connection default
podman context rm -> podman system connection rm
podman context create -> podman system connection add
podman context ls ->podman system connection ls
podman context inspect ->podman system connection ls --json (For
specified connections)
Podman context is a hidden command, but can be used for existing scripts
that assume Docker under the covers.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
--no-reset and --no-stream, in podman-stats and pod-stats.
Very minor tweak to --no-stream to account for pods.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Mostly went with the podman-run version. For ease of review, I
kept the "you" word -- I will fix that in my in-progress
cleanup PR.
This affects lots of files, each of which had slightly different
wording, but this actually isn't as bad as it looks. The diffs
were minor, and I'm pretty sure the new refactored text applies
equally well to all the man pages.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Three simple options shared among podman-create, exec, run.
I mostly went with the podman-run versions. For --tty, this
means that create and exec get the long stdout/stderr note.
(The example, though, remains only in podman-run). For -i,
mostly boldspace changes.
For --preserve-fds, podman-exec now has the "not with remote"
note (which it didn't until now)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Similar to yesterday's --ip. No changes to content, all I did
was variableize the instances of 'container'/'pod'.
Did not touch podman-network-connect file, but if someone
wants to look at that one and tell me whether all this long
text is applicable to it (or not), I'd appreciate it.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The default ip is 10.0.2.2 but is always the second ip from the
slirp4netns subnet, which can be changed via the cidr option.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=2090166
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Ugh. This had about five different variations among twelve files.
I went with the version from podman-create, kube play, login, pull,
push, run. The others:
- manifest-add and create did not include the "true, false, missing"
text. Now they do. (If this text is N/A to these two, please yell).
Also, these two were written with "talking" instead of "contacting"
the registry.
- podman-build had "does not work with remote", but this
does not seem to be true, so I removed it. None of the
other files had that.
- the wording in podman-search is just weird, with "if needed"
and "is listed" and unclear "insecure registries". I just
nuked it all. If that wording was deliberate, for some reason
that applies only to podman-search, please yell.
- podman-container-runlabel has one diff that I like, actually
spelling out containers-registries.conf(5), but incorporating
that would make this even harder to review. I will add that
to my in-progress doc-cleanup PR.
Review recommendation: run hack/markdown-preprocess-review but
just quit out of it immediately (on both popups). Ignore it completely.
Then cd /tmp/markdown-preprocess-review.diffs/tls-verify and run
$ clear;for i in podman-*;do echo;echo $i;wdiff -t $i zzz-chosen.md;done
This will show the major diffs between each version and the chosen one.
Assumes you have wdiff installed. If you have another colorize-actual-
individual-word-diffs tool installed, use that. I like cdif[1].
[1] https://github.com/kaz-utashiro/sdif-tools
Signed-off-by: Ed Santiago <santiago@redhat.com>
Almost identical between podman-create, run, and pod-create.
The "Notes" are different, so I left those duplicated between
podman-create and run, and left the different one in pod-create.
podman-container-restore also has --publish but it's unrelated.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only shared between podman-create and run. The latter was
updated in #5192, and that is the text I chose.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only shared by podman-create, -pull, -run. No changes
made other than whitespace, so this should be a gimme.
podman-build, import, and manifest-* also have --os options,
but those are unrelated and I can't find a way to combine
any two of them.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Between podman-create, run, and pod-create. The big difference
is that I changed 'IP' to 'IPv4' in podman-pod-create, I believe
that was an oversight in #12611.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Emit a warning to the user when generating a unit with --new on a
container that was created with a custom --restart policy. As shown
in #15284, a custom --restart policy in that case can lead to issues
on system shutdown where systemd attempts to nuke the unit but Podman
keeps on restarting the container.
Fixes: #15284
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
podman-create and -run only. The SELinux text was added
to podman-run (but not -create) in #3631, and reformatted
in #5192. I assume here that it also applies to podman-create.
Per feedback from Dan, added :s0 to SELinux context
Signed-off-by: Ed Santiago <santiago@redhat.com>
Removed a spurious right-bracket; went with upper-case for options;
removed 'you's; added some <<container|pod>>s.
Hard to review because none of the existing man pages had it
quite right.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure that the wording of mounting something _from_ the source
_into_ the destination is consistent.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This one is a nightmare, because --volume has been edited
in four different files throughout the years (five if you
count podman-build, which I am not including in this PR).
Those edits have not always been done in sync.
The list of options was reordered 2022-06-28 by Giuseppe in #14734,
but only in podman-create and -run (not in podman-pod-*). No
explanation of why, but I'll assume he knew what he was doing,
and have accepted that for the reference copy.
There was also a big edit in #8519.
The "Propagation property...bind mounted" sentence first appeared
in pod-clone, in #14299 by cdoern, with no obvious source of where
it came from. I choose to include it in the reference copy.
The "**copy**" option seems to work in pod-create, so I'm including
it in the reference copy. Someone please yell loudly if this is
not the case.
The "disables SELinux separation for containers used in the build",
no idea, changed that to just "for the container/pod"
The "advanced users / overlay / upperdir / workdir" paragraph
makes zero sense to me, but hey, I assume it applies to all
the commands, so I put it in the reference copy.
Finally, there's still a mishmash of backticks, asterisks, underscores,
and even quotation marks. Someone is gonna have to perform major
cleanup on this one day, but at least it'll be in only one place.
Signed-off-by: Ed Santiago <santiago@redhat.com>
For systems that have extreme robustness requirements (edge devices,
particularly those in difficult to access environments), it is important
that applications continue running in all circumstances. When the
application fails, Podman must restart it automatically to provide this
robustness. Otherwise, these devices may require customer IT to
physically gain access to restart, which can be prohibitively difficult.
Add a new `--on-failure` flag that supports four actions:
- **none**: Take no action.
- **kill**: Kill the container.
- **restart**: Restart the container. Do not combine the `restart`
action with the `--restart` flag. When running inside of
a systemd unit, consider using the `kill` or `stop`
action instead to make use of systemd's restart policy.
- **stop**: Stop the container.
To remain backwards compatible, **none** is the default action.
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
This commit was automatically cherry-picked
by buildah-vendor-treadmill v0.3
from the buildah vendor treadmill PR, #13808
Changes since 2022-08-16:
- buildah 4139: minor line-number changes to the diff
file because helpers.bash got edited
- buildah 4190: skip the new test if remote
- buildah 4195: add --retry / --retry-delay
- changes to deal with vendoring gomega, units
- changes to the podman login error message in system test
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Another easy one. Difference is that pod-create was fixed
in #14532 (s/ignore/not allowed/) but pod-clone was not.
I went with the fixed version.
Signed-off-by: Ed Santiago <santiago@redhat.com>
As promised, harder and harder to review. Please take your time
with this one.
For IPC, I went with the list form. For net, I used the single-
sentence form instead of a one-element list.
The container/pod diffs are clumsy, sorry. Maybe it's time to
start thinking of a more flexible conditional mechanism, but
I'd really like to avoid that so I hope this is acceptable.
In the first sentence I went with 'namespaced' (final 'd') in
all instances. I also got rid of the 'new' in 'new pod' in
pod-clone.
Signed-off-by: Ed Santiago <santiago@redhat.com>
The refactors are starting to get harder to review - sorry.
Here the differences are pretty small, mostly changes to the
"it is a combination" wording and some asteriskization.
The more significant diffs are that there are some Notes that
are pod- or container- or build-specific; I needed to move those
from the middle to the end, then keep them in the source files
themselves. I don't think this affects readability of the
resulting man pages, but your opinion may differ.
Last important thing: I included the /dev/fuse text in the
common option, which means it will now show up in podman-build
(it was not previously there). If this text is not applicable
to podman-build, please LMK ASAP so I can just move it back
to individual source files.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Add auto-update support to `podman kube play`. Auto-update policies can
be configured for:
* the entire pod via the `io.containers.autoupdate` annotation
* a specific container via the `io.containers.autoupdate/$name` annotation
To make use of rollbacks, the `io.containers.sdnotify` policy should be
set to `container` such that the workload running _inside_ the container
can send the READY message via the NOTIFY_SOCKET once ready. For
further details on auto updates and rollbacks, please refer to the
specific article [1].
Since auto updates and rollbacks bases on Podman's systemd integration,
the k8s YAML must be executed in the `podman-kube@` systemd template.
For further details on how to run k8s YAML in systemd via Podman, please
refer to the specific article [2].
An examplary k8s YAML may look as follows:
```YAML
apiVersion: v1
kind: Pod
metadata:
annotations:
io.containers.autoupdate: "local"
io.containers.autoupdate/b: "registry"
labels:
app: test
name: test_pod
spec:
containers:
- command:
- top
image: alpine
name: a
- command:
- top
image: alpine
name: b
```
[1] https://www.redhat.com/sysadmin/podman-auto-updates-rollbacks
[2] https://www.redhat.com/sysadmin/kubernetes-workloads-podman-systemd
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
(memory-star, i.e., several memory options) that didn't get
included in #15276. Most of them are shoo-ins; the two in
container-clone and pod-clone deserve special attention
because of the "If unspecified" wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Went with the podman-run version, where the "example" is
in the option template as per our guidelines.
I could not include the network- or volume-create
man pages, nor podman build.
Signed-off-by: Ed Santiago <santiago@redhat.com>
podman update allows users to change the cgroup configuration of an existing container using the already defined resource limits flags
from podman create/run. The supported flags in crun are:
this command is also now supported in the libpod api via the /libpod/containers/<CID>/update endpoint where
the resource limits are passed inthe request body and follow the OCI resource spec format
–memory
–cpus
–cpuset-cpus
–cpuset-mems
–memory-swap
–memory-reservation
–cpu-shares
–cpu-quota
–cpu-period
–blkio-weight
–cpu-rt-period
–cpu-rt-runtime
-device-read-bps
-device-write-bps
-device-read-iops
-device-write-iops
-memory-swappiness
-blkio-weight-device
resolves#15067
Signed-off-by: Charlie Doern <cdoern@redhat.com>
Only for podman-create and -run, unfortunately: all the
others are too different, and can't easily be combined.
I went with the podman-run version because it was most
recently updated in #5192.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Would've been an easy one, except I decided to fix the text
to conform to our guidelines. I haven't been doing this,
but in this case it's only two man pages and the text is
short enough to make for easy review.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only applicable to podman-create and -run. I went with the -run
version because it is cleaner and more recently updated.
Signed-off-by: Ed Santiago <santiago@redhat.com>
When a kube yaml has a volume set as empty dir, podman
will create an anonymous volume with the empty dir name and
attach it to the containers running in the pod. When the pod
is removed, the empy dir volume created is also removed.
Add tests and docs for this as well.
Signed-off-by: Urvashi Mohnani <umohnani@redhat.com>
add two new options to the keep-id user namespace option:
- uid: allow to override the UID used inside the container.
- gid: allow to override the GID used inside the container.
For example, the following command will map the rootless user (that
has UID=0 inside the rootless user namespace) to the UID=11 inside the
container user namespace:
$ podman run --userns=keep-id:uid=11 --rm -ti fedora cat /proc/self/uid_map
0 1 11
11 0 1
12 12 65525
Closes: https://github.com/containers/podman/issues/15294
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Whew! This one started off identical everywhere, but the version
in podman-run got fixed in #1380, then again in #5192, with no
corresponding fixes to any of the other man pages.
I went with the podman-run version, with a small change in wording.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only between podman-create and -run. (podman-build is too
different). I went with the podman-run version.
Signed-off-by: Ed Santiago <santiago@redhat.com>
--dns-opt and --dns-search, but only in podman-create and -run.
Went with the -run version in both cases; --dns-opt remained
unchanged, but in --dns-search I changed 'and' to 'with'.
Did not consolidate podman-build or podman-pod-create: too
different.
Signed-off-by: Ed Santiago <santiago@redhat.com>
NOTE: This does not edit the use-sigstore-attachments value
in registries.d, similarly to how (podman image trust set) didn't
set the lookaside paths for simple signing.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
podman-logs and podman-pod-logs. Most of these were already
identical, needing no review. Exceptions:
--follow : needed some container/pod tweaking. This is the
only one that really needs careful review.
--names : I went with the longer version
Note that podman-events has --since and --until options too, but
those are too different to be combined here.
Signed-off-by: Ed Santiago <santiago@redhat.com>
This is not an easy one to review, sorry.
I went with the version from podman-create. The differences
against podman-run are subtle: apostrophes, whitespace, and
the arg description in the '####' line. Suggestion for review:
run hack/markdown-preprocess-review, then after you finish
with that, cd /tmp/markdown<TAB>/ipc and use your favorite
two-file diff tool to compare podman-run* against zzz*.
I did not even try to combine the podman-build one; that one
is too different.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Two versions: one for container-related commands, one for pods.
The container one is easy: all versions matched, so I made no
changes.
The pod one is hard to review. I went with the pod-clone
version because the pod-create one looks suspicious: it
talks in terms of containers, not pods. It's possible
that I've got it wrong, and that these two cannot be
combined, so please review very carefully. I strongly
recommend using hack/markdown-preprocess-review for this one.
Signed-off-by: Ed Santiago <santiago@redhat.com>
I chose the version from podman-run because it is the most
up-to-date, and most correct wrt current syntax guidelines.
Differences are in arg description, language, and asterisks.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Allow end users to preprocess default environment variables before
injecting them into container using `--env-merge`
Usage
```
podman run -it --rm --env-merge some=${some}-edit --env-merge
some2=${some2}-edit2 myimage sh
```
Closes: https://github.com/containers/podman/issues/15288
Signed-off-by: Aditya R <arajan@redhat.com>
I chose the version from podman-create. (This is unusual. podman-run
tends to have the better-maintained, more up-to-date version.)
Signed-off-by: Ed Santiago <santiago@redhat.com>
A NOP option. I chose the container word, of course, and the
word 'option' instead of 'flag'. I also hyphenated where needed.
I'm choosing to eliminate the "not on remote" text, because I
don't think it's true: podman-remote happily accepts that
flag on all those commands, including build. (It's marked
as hidden on build, but still accepted).
Signed-off-by: Ed Santiago <santiago@redhat.com>
Only on podman create and run: the --cpus option on container-clone
and pod-clone can probably be combined, but maybe later. pod-create
has unique wording that can't be combined.
This is a freebie to review: the text in both files was already
identical, and I made no changes to it. hack/markdown-preprocess-review
will agree, and show you no diffs, because there are none worth
seeing.
Signed-off-by: Ed Santiago <santiago@redhat.com>
`podman kube play` can create pods and containers from YAML
read from a URL poiniting to a YAML file.
For example: `podman kube play https://example.com/demo.yml`.
`podman kube down` can also teardown pods and containers created
from that YAML file by also reading YAML from a URL, provided the
YAML file the URL points to has not been changed or altered since
it was used to create pods and containers
Closes#14955
Signed-off-by: Niall Crowe <nicrowe@redhat.com>
When using remote podman client, not all transports work as expected. So
document this limitation.
Fixes: containers/podman#15141
Signed-off-by: Tomas Volf <tomas.volf@showmax.com>
When an unsupported limit on cgroups V1 rootless systems
is requested, podman prints an warning message and
ignores the option/flag.
```
Target options/flags:
--cpu-period, --cpu-quota, --cpu-rt-period, --cpu-rt-runtime,
--cpus, --cpu-shares, --cpuset-cpus, --cpuset-mems, --memory,
--memory-reservation, --memory-swap, --memory-swappiness,
--blkio-weight, --device-read-bps, --device-write-bps,
--device-read-iops, --device-write-iops, --blkio-weight-device
```
Related to https://github.com/containers/podman/discussions/10152
Signed-off-by: Toshiki Sonoda <sonoda.toshiki@fujitsu.com>
Much like --cidfile (#15414), --pod-id-file has two meanings.
One is used in pod-related commands, one in container ones.
Both meanings read the file, so the read/write split used
in --cidfile is not applicable here.
podman-pod-create keeps its --pod-id-file option because
that one cannot be refactored: that's the only command (now)
that writes a pod-id file.
Reviewable using hack/markdown-preprocess-review but I
did take some liberties with the #### args because they
were wrong. And, since I had to much with the description
text anyway (resulting in diffs), I also took the liberty
of cleaning up a double space.
Signed-off-by: Ed Santiago <santiago@redhat.com>
I've been doing the man-page cleanup distractedly, while
fighting other fires, and submitted some crap:
* #15339: I used single angle brackets, not double
* #15407: I only refactored --cert-dir from some man pages, not all
Easy to review with hack/markdown-preprocess-review, because all the
removed texts are identical. The only diff is that container-certs.d
is now a link.
Sorry about that. I'm going to spend more time being careful.
Signed-off-by: Ed Santiago <santiago@redhat.com>
There are two meanings: one writes a cidfile, the other reads.
Split into two .md files.
This can be reviewed with hack/markdown-preprocess-review .
The main differences you'll see are all in cidfile.read:
1) I use the <<subcommand>> feature. This works nicely for
kill, pause/unpause, and stop. It works less nicely for
rm, because the man page will show "...and rm the container"
(a human might prefer to see "REMOVE the container"). Given
the benefit of this cleanup, I think this is a fine tradeoff.
2) I choose to include the "multiple times" text even on man pages
where it wasn't present before. I tested to make sure it works.
3) The #### line I choose is IMHO the best one.
Minor differences:
* I believe the "remove the container" text in podman-kill
and podman-stop is a copy/paste error. This PR fixes it.
* The only differences between the cidfile.write texts is
the #### line (my version is best) and a final period.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Refactor the --creds option. I went with the one in podman-pull
The main difference between all of them is the '####' line,
differences in the param descriptions. podman-pull had the
clearest one.
This is another one that hack/markdown-preprocess-review is
good for reviewing.
Signed-off-by: Ed Santiago <santiago@redhat.com>
After pulling/creating an image of a foreign platform, Podman will
happily use it when looking it up in the local storage and will not
pull down the image matching the host platform.
As discussed in #12682, the reasoning for it is Docker compatibility and
the fact that user already rely on the behavior. While Podman is now
emitting a warning when an image is in use not matching the local
platform, the documentation was lacking that information.
Fixes: #15300
Signed-off-by: Valentin Rothberg <vrothberg@redhat.com>
...and, tweak markdown-process-review so it can detect and
remove identical files, making review easier.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Accept a --amend flag in `podman manifest create`, and treat
`--insecure` as we would `--tls-verify=false` in `podman manifest`'s
"add", "create", and "push" subcommands.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Refactor the --authfile option.
My suggestion for review:
1) run hack/markdown-preprocess-review and immediately Ctrl-Q to
quit out of diffuse, which is completely unusable for this
many files; then
2) cd /tmp/markdown-preprocess-review.diffs/authfile
- this is the directory created by the review script
3) rm podman-image-sign* podman-log* podman-search.1.md.in
- because they're essentially identical to podman-create
4) rm podman-manifest-* podman-push.*
- because they're 100% identical to podman-kube-play
5) rm podman-kube-play*
- because it's apart-from-whitespace identical to podman-build
(use "wdiff" to confirm)
6) rm podman-auto-update*
- because that's the one I chose (hence == zzz-chosen.md)
(You should obviously run your own diff/cmp before rm, to confirm
my assertions about which files are identical).
After all that, you have a manageable number of files which
you can scan, read, diff against zzz-chosen.md, even run diffuse.
This option is IMHO the poster child for why we need this kind
of man page refactoring.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Andrei Natanael Cosma
Ed Santiago
OpenShift Merge Robot
Daniel J Walsh
Erik Sjölund
Ashley Cui
Matthew Heon
Paul Holzinger
Valentin Rothberg
Andrew Denton
Barnabé BALP
Toshiki Sonoda
Charlie Doern
Urvashi Mohnani
Giuseppe Scrivano
Arthur Sengileyev
patrycja-guzik
Stefano Figura
Miloslav Trmač
Aditya R
Niall Crowe
Tomas Volf
Nalin Dahyabhai