Make Podman more tolerant when parsing image volumes during container
creation and further fix an infinite loop when checking them.
Consider `VOLUME ['/etc/foo', '/etc/bar']` in a Containerfile. While
it looks correct to the human eye, the single quotes are wrong and yield
the two volumes to be `[/etc/foo,` and `/etc/bar]` in Podman and Docker.
When running the container, it'll create a directory `bar]` in `/etc`
and a directory `[` in `/` with two subdirectories `etc/foo,`. This
behavior is surprising to me but how Docker behaves. We may improve on
that in the future. Note that the correct way to syntax for volumes in
a Containerfile is `VOLUME /A /B /C` or `VOLUME ["/A", "/B", "/C"]`;
single quotes are not supported.
This change restores this behavior without breaking container creation
or ending up in an infinite loop.
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=2014149
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
otherwise passing a formatter string as an option causes a weird
error message:
$ podman run --mount type=devpts,destination=/dev/pts,%sfoo ...
Error: %!s(MISSING)foo: invalid mount option
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
commit 6b3b0a17c6 introduced a check for
the PID file before attempting to move the PID to a new scope.
This is still vulnerable to TOCTOU race condition though, since the
PID file or the PID can be removed/killed after the check was
successful but before it was used.
Closes: https://github.com/containers/podman/issues/12065
[NO NEW TESTS NEEDED] it fixes a CI flake
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we are having a hard time figuring out a failure in the CI:
https://github.com/containers/podman/issues/11191
Rename the sub-cgroup created here, so we can be certain the error is
caused by this part.
[NO NEW TESTS NEEDED] we need this for the CI.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
The OCICNI port format has one big problem: It does not support ranges.
So if a users forwards a range of 1k ports with podman run -p 1001-2000
we have to store each of the thousand ports individually as array element.
This bloats the db and makes the JSON encoding and decoding much slower.
In many places we already use a better port struct type which supports
ranges, e.g. `pkg/specgen` or the new network interface.
Because of this we have to do many runtime conversions between the two
port formats. If everything uses the new format we can skip the runtime
conversions.
This commit adds logic to replace all occurrences of the old format
with the new one. The database will automatically migrate the ports
to new format when the container config is read for the first time
after the update.
The `ParsePortMapping` function is `pkg/specgen/generate` has been
reworked to better work with the new format. The new logic is able
to deduplicate the given ports. This is necessary the ensure we
store them efficiently in the DB. The new code should also be more
performant than the old one.
To prove that the code is fast enough I added go benchmarks. Parsing
1 million ports took less than 0.5 seconds on my laptop.
Benchmark normalize PortMappings in specgen:
Please note that the 1 million ports are actually 20x 50k ranges
because we cannot have bigger ranges than 65535 ports.
```
$ go test -bench=. -benchmem ./pkg/specgen/generate/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/pkg/specgen/generate
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
BenchmarkParsePortMappingNoPorts-12 480821532 2.230 ns/op 0 B/op 0 allocs/op
BenchmarkParsePortMapping1-12 38972 30183 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMapping100-12 18752 60688 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMapping1k-12 3104 331719 ns/op 223840 B/op 3018 allocs/op
BenchmarkParsePortMapping10k-12 376 3122930 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMapping1m-12 3 390869926 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingReverse100-12 18940 63414 ns/op 141088 B/op 315 allocs/op
BenchmarkParsePortMappingReverse1k-12 3015 362500 ns/op 223841 B/op 3018 allocs/op
BenchmarkParsePortMappingReverse10k-12 343 3318135 ns/op 1223650 B/op 30027 allocs/op
BenchmarkParsePortMappingReverse1m-12 3 403392469 ns/op 124593840 B/op 4000624 allocs/op
BenchmarkParsePortMappingRange1-12 37635 28756 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange100-12 39604 28935 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1k-12 38384 29921 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange10k-12 29479 40381 ns/op 131584 B/op 9 allocs/op
BenchmarkParsePortMappingRange1m-12 927 1279369 ns/op 143022 B/op 164 allocs/op
PASS
ok github.com/containers/podman/v3/pkg/specgen/generate 25.492s
```
Benchmark convert old port format to new one:
```
go test -bench=. -benchmem ./libpod/
goos: linux
goarch: amd64
pkg: github.com/containers/podman/v3/libpod
cpu: Intel(R) Core(TM) i7-10850H CPU @ 2.70GHz
Benchmark_ocicniPortsToNetTypesPortsNoPorts-12 663526126 1.663 ns/op 0 B/op 0 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1-12 7858082 141.9 ns/op 72 B/op 2 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10-12 2065347 571.0 ns/op 536 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts100-12 138478 8641 ns/op 4216 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1k-12 9414 120964 ns/op 41080 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts10k-12 781 1490526 ns/op 401528 B/op 4 allocs/op
Benchmark_ocicniPortsToNetTypesPorts1m-12 4 250579010 ns/op 40001656 B/op 4 allocs/op
PASS
ok github.com/containers/podman/v3/libpod 11.727s
```
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
`logs -f` with `journald` is supported only when `journald` events
backend is used. To pass system tests using `logs -f` in an environment
where `events_logger` is not set to `journald` in `containers.conf`,
this fix sets `--events-backend` or `--log-driver` temporally.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
A restored container still had the state set to 'Checkpointed: true'
which seems wrong if it running again.
[NO NEW TESTS NEEDED]
Signed-off-by: Adrian Reber <areber@redhat.com>
Make sure that the value is only set if specified on the CLI. c/image
already defaults to true but if set in the system context, we'd skip
settings in the registries.conf.
Fixes: #11933
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Previously this test used an ad-hoc timeout mechanism to synchronize
with output of the container ID. However, depending on runtime
conditions this may not correctly correspond with complete startup
of the systemd process. Consequently this test fails under some
conditions with an error like:
`System has not been booted with systemd as init system (PID 1). Can't
operate. Failed to connect to bus: Host is down`
Fix this by using the more appropriate `WaitContainerReady()`
against output from system startup, close to finalization. In this way,
the test status command cannot run until systemd is fully operational.
Signed-off-by: Chris Evich <cevich@redhat.com>
do not start up a dbus daemon if it is not already running.
[NO NEW TESTS NEEDED] the fix is in a dependency.
Closes: https://github.com/containers/podman/issues/9727
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Duplicate Address Detection slows the ipv6 setup down for 1-2 seconds.
Since slirp4netns is run it is own namespace and not directly routed
we can skip this to make the ipv6 address immediately available.
We change the default to make sure the slirp tap interface gets the
correct value assigned so DAD is disabled for it.
Also make sure to change this value back to the original after slirp4netns
is ready in case users rely on this sysctl.
Fixes#11062
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The following problems regarding `logs --tail` with the journald log
driver are fixed:
- One more line than a specified value is displayed.
- '--tail 0' displays all lines while the other log drivers displays
nothing.
- Partial lines are not considered.
- If the journald events backend is used and a container has exited,
nothing is displayed.
Integration tests that should have detected the bugs are also fixed. The
tests are executed with json-file log driver three times without this
fix.
Signed-off-by: Hironori Shiina <shiina.hironori@jp.fujitsu.com>
Trying to restore a container that was started with '--ipc host' fails
with:
Error: error creating container storage: ProcessLabel and Mountlabel must either not be specified or both specified
We already fixed this exact same error message for containers started
with '--privileged'. The previous fix was to check if the to be restored
container is a privileged container (c.config.Privileged). Unfortunately
this does not work for containers started with '--ipc host'.
This commit changes the check for a privileged container to check if
both the ProcessLabel and the MountLabel is actually set and only then
re-uses those labels.
Signed-off-by: Adrian Reber <areber@redhat.com>
So far, the infra containers of pods required pulling down an image
rendering pods not usable in disconnected environments. Instead, build
an image locally which uses local pause binary.
Fixes: #10354
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add the k8s pause binary to `pause/pause.c` and do the plumbing in the
Makefile to install it in $libexec/podman/pause/pause. It is intended to
replace the k8s pause image and hence the need for network connectivity
when creating pods.
[NO NEW TESTS NEEDED] since it will be tested in a following commit.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Mount a directory from /var/tmp to /tmp to make sure that /tmp is not on
an overlay mount. This should make overlay mounts possible in the
containerized tests which we're currently skipping.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Make sure to create the mounts for containers with an overlay root FS in
the runtime dir (e.g., /run/user/1000/...) to guarantee that we can
actually overlay mount on the specific path which is not the case for
the graph root.
[NO NEW TESTS NEEDED] since it is not a user-facing change.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This will change mount of /dev within container to noexec, making
containers slightly more secure.
[NO NEW TESTS NEEDED]
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We should only use the Containerfiles/Dockerfiles found in the context
directory.
Fixes: https://github.com/containers/podman/issues/12054
[NO NEW TESTS NEEDED] It is difficult to setup a test for this in the
CI/CD system, but build tests should find if this PR broke anything.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Instead using the OS-wide system default policy, use
the one in this repo, and adjust the expected results
(as well as making the test stricter).
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Giacomo Sanchietti
OpenShift Merge Robot
Jhon Honce
Valentin Rothberg
Ashley Cui
Giuseppe Scrivano
dependabot[bot]
Paul Holzinger
Hironori Shiina
Adrian Reber
Chris Evich
Anders F Björklund
Daniel J Walsh
Miloslav Trmač