The checkpoint archive compression was hardcoded to `archive.Gzip`.
There have been requests to make the used compression algorithm
selectable. There was especially the request to not compress the
checkpoint archive to be able to create faster checkpoints when not
compressing it.
This also changes the default from `gzip` to `zstd`. This change should
not break anything as the restore code path automatically handles
whatever compression the user provides during restore.
Signed-off-by: Adrian Reber <areber@redhat.com>
The containers /etc/resolv.conf allways preserved the ipv6 nameserves
from the host even when the container did not supported ipv6. Check
if the cni result contains an ipv6 address or slirp4netns has ipv6
support enabled and only add the ipv6 nameservers when this is the case.
The test needs to have an ipv6 nameserver in the hosts /etc/hosts but we
should never mess with this file on the host. Therefore the test is
skipped when no ipv6 is detected.
Fixes#10158
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
While different filters are applied in conjunction, the same filter (but
with different values) should be applied in disjunction. This allows,
for instance, to query the events of two containers.
Fixes: #10507
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Using the gvproxy application on the host, we can now port forward from
the machine vm on the host. It requires that 'gvproxy' be installed in
an executable location. gvproxy can be found in the
containers/gvisor-tap-vsock github repo.
[NO TESTS NEEDED]
Signed-off-by: Brent Baude <bbaude@redhat.com>
Move the creation of the channel outside of the sub-routine to fix a
data race between writing the channel (implicitly by calling
EventChannel()) and using that channel in libimage.
[NO TESTS NEEDED]
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
After #8906, there is a potential race condition in container
removal of running containers with `--rm`. Running containers
must first be stopped, which was changed to unlock the container
to allow commands like `podman ps` to continue to run while
stopping; however, this also means that the cleanup process can
potentially run before we re-lock, and remove the container from
under us, resulting in error messages from `podman rm`. The end
result is unchanged, the container is still cleanly removed, but
the `podman rm` command will seem to have failed.
Work around this by pinging the database after we stop the
container to make sure it still exists. If it doesn't, our job is
done and we can exit cleanly.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When the containers.conf field "NetNS" is set to "Bridge" and the
"RootlessNetworking" field is set to "cni", Podman will now
handle rootless in the same way it does root - all containers
will be joined to a default CNI network, instead of exclusively
using slirp4netns.
If no CNI default network config is present for the user, one
will be auto-generated (this also works for root, but it won't be
nearly as common there since the package should already ship a
config).
I eventually hope to remove the "NetNS=Bridge" bit from
containers.conf, but let's get something in for Brent to work
with.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Fix a race in journald driver. Following the logs implies streaming
until the container is dead. Streaming happened in one goroutine,
waiting for the container to exit/die and signaling that event happened
in another goroutine.
The nature of having two goroutines running simultaneously is pretty
much the core of the race condition. When the streaming goroutines
received the signal that the container has exitted, the routine may not
have read and written all of the container's logs.
Fix this race by reading both, the logs and the events, of the container
and stop streaming when the died/exited event has been read. The died
event is guaranteed to be after all logs in the journal which guarantees
not only consistencty but also a deterministic behavior.
Note that the journald log driver now requires the journald event
backend to be set.
Fixes: #10323
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Fix a data race between creating and using the libimage-events channel.
[NO TESTS NEEDED] since it really depends on the scheduler and we
couldn't hit the race so far.
Fixes: #10459
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
ErrOCIRuntimeNotFound error is misleading. Try to make it more
understandable to the user that the OCI Runtime IE crun or runc is not
missing, but the command they attempted to run within the container is
missing.
[NO TESTS NEEDED] Regular tests should handle this.
Fixes: https://github.com/containers/podman/issues/10432
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Creating a macvlan network with the subnet or ipRange option should set
the ipam plugin type to `host-local`. We also have to insert the default
route.
Fixes#10283
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
When attempting to copy files into and out of running containers
within the host pidnamespace, the code was attempting to join the
host pidns again, and getting an error. This was causing the podman
cp command to fail. Since we are already in the host pid namespace,
we should not be attempting to join. This PR adds a check to see if
the container is in NOT host pid namespace, and only then attempts to
join.
Fixes: https://github.com/containers/podman/issues/9985
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
This change adds the entry `host.containers.internal` to the `/etc/hosts`
file within a new containers filesystem. The ip address is determined by
the containers networking configuration and points to the gateway address
for the containers networking namespace.
Closes#5651
Signed-off-by: Baron Lenardson <lenardson.baron@gmail.com>
Docker allows relabeling of any volume passed in via -v, even
including named volumes. This normally isn't an issue at all,
given named volumes get the right label for container access
automatically, but this becomes an issue when volume plugins are
involved - these aren't managed by Podman, and may well be
unaware of SELinux labelling. We could automatically relabel
these volumes on creation, but I'm still reluctant to do that
(feels like it could break things). Instead, let's allow :z and
:Z to be used with named volumes, so users can explicitly request
relabel of a volume plugin-backed volume.
We also get :U at the same time. I don't see any real need for it
but it also doesn't seem to hurt, so I didn't bother disabling
it.
Fixes#10273
Signed-off-by: Matthew Heon <mheon@redhat.com>
Allow podman network reload to be run as rootless user. While it is
unlikely that the iptable rules are flushed inside the rootless cni
namespace, it could still happen. Also fix podman network reload --all
to ignore errors when a container does not have the bridge network mode,
e.g. slirp4netns.
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
We should create the /etc/mtab->/proc/mountinfo link
so that mount command will work within the container.
Docker does this by default.
Fixes: https://github.com/containers/podman/issues/10263
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The initial version of libimage changed the order of layers which has
now been restored to remain backwards compatible.
Further changes:
* Fix a bug in the journald logging which requires to strip trailing
new lines from the message. The system tests did not pass due to
empty new lines. Triggered by changing the default logger to
journald in containers/common.
* Fix another bug in the journald logging which embedded the container
ID inside the message rather than the specifid field. That surfaced
in a preceeding whitespace of each log line which broke the system
tests.
* Alter the system tests to make sure that the k8s-file and the
journald logging drivers are executed.
* A number of e2e tests have been changed to force the k8s-file driver
to make them pass when running inside a root container.
* Increase the timeout in a kill test which seems to take longer now.
Reasons are unknown. Tests passed earlier and no signal-related
changes happend. It may be CI VM flake since some system tests but
other flaked.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When a container is automatically restarted due its restart policy and
the container used the slirp4netns netmode, the slirp4netns process
died. This caused the container to lose network connectivity.
To fix this we have to start a new slirp4netns process.
Fixes#8047
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
Developers asked for a deterministic field to verify if podman is
running via API or linked directly to libpod library.
$ podman info --format '{{.Host.ServiceIsRemote}}'
false
$ podman-remote info --format '{{.Host.ServiceIsRemote}}'
true
$ podman --remote info --format '{{.Host.ServiceIsRemote}}'
true
* docs/conf.py formatted via black
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Commit 728b73d7c4 introduced a regression. Containers created with a
previous version do no longer start successfully. The problem is that
the PidFile in the container config is empty for those containers. If
the PidFile is empty we have to set it to the previous default.
[NO TESTS NEEDED] We should investigate why the system upgrade test did
not caught this.
Fixes#10274
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
In the case of generate kube the auto-update labels will be converted into kube annotations and for play kube they will be converted back to labels since that's what podman understands
Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
Revert : https://github.com/containers/podman/pull/9895
Turns out that if Docker is in --selinux-enabeled, it still relabels if
the user tells the system to, even if running a --privileged container
or if the selinux separation is disabled --security-opt label=disable.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Env var secrets are env vars that are set inside the container but not
commited to and image. Also support reading from env var when creating a
secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
filepath.Dir in some cases returns `.` symbol and calling this function
again returns same result. In such cases this function
never returns and causes some operations to stuck forever.
Closes#10216
Signed-off-by: Slava Bacherikov <slava@bacher09.org>
extend to pods the existing check whether the cgroup is usable when
running as rootless with cgroupfs.
commit 17ce567c68 introduced the
regression.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
volatile containers are a storage optimization that disables *sync()
syscalls for the container rootfs.
If a container is created with --rm, then automatically set the
volatile storage flag as anyway the container won't persist after a
reboot or machine crash.
[NO TESTS NEEDED]
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Migrate the Podman code base over to `common/libimage` which replaces
`libpod/image` and a lot of glue code entirely.
Note that I tried to leave bread crumbs for changed tests.
Miscellaneous changes:
* Some errors yield different messages which required to alter some
tests.
* I fixed some pre-existing issues in the code. Others were marked as
`//TODO`s to prevent the PR from exploding.
* The `NamesHistory` of an image is returned as is from the storage.
Previously, we did some filtering which I think is undesirable.
Instead we should return the data as stored in the storage.
* Touched handlers use the ABI interfaces where possible.
* Local image resolution: previously Podman would match "foo" on
"myfoo". This behaviour has been changed and Podman will now
only match on repository boundaries such that "foo" would match
"my/foo" but not "myfoo". I consider the old behaviour to be a
bug, at the very least an exotic corner case.
* Futhermore, "foo:none" does *not* resolve to a local image "foo"
without tag anymore. It's a hill I am (almost) willing to die on.
* `image prune` prints the IDs of pruned images. Previously, in some
cases, the names were printed instead. The API clearly states ID,
so we should stick to it.
* Compat endpoint image removal with _force_ deletes the entire not
only the specified tag.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Adrian Reber
Paul Holzinger
OpenShift Merge Robot
Valentin Rothberg
Brent Baude
Matthew Heon
flouthoc
Daniel J Walsh
Paul Holzinger
Ashley Cui
Baron Lenardson
Jhon Honce
Eduardo Vega
Slava Bacherikov
Boaz Shuster
Giuseppe Scrivano