By default today, the container is always started if its pod is also
started. This prevents to create custom with systemd where containers in
a pod could be started through their `[Install]` section.
We add a key `StartWithPod=`, enabled by default, that enables one to
disable that behavior.
This prevents the pod service from changing the state of the container
service.
Fixes#24401
Signed-off-by: Farya L. Maerten <me@ltow.me>
There is no good reason for the special case, kube and pod units
definitely need it. Volume and network units maybe not but for
consistency we add it there as well. This makes the docs much easier to
write and understand for users as the behavior will not differ.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Quadlet inserts network-online.target Wants/After dependencies to ensure pulling works.
Those systemd statements cannot be subsequently reset.
In the cases where those dependencies are not wanted, we add a new
configuration item called `DefaultDependencies=` in a new section called
[Quadlet]. This section is shared between different unit types.
fixes#24193
Signed-off-by: Farya L. Maerten <me@ltow.me>
Change getUnitDirs to maintain a slice in addition to the map and return the slice
Add helper functions to make the code more readable
Adjust unit tests
Restore system test
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Use os.ReadDir recursively instead of filepath.WalkDir
Use map instead of list to easily find looped Symlinks
Update existing tests and add a more elaborate one
Update the man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
It qemu cannot be compiled anyway so make sure we do not try to compile
parts where the typechecker complains about on windows.
Also all the e2e test files are only used on linux as well.
pkg/machine/wsl also reports some error but to many for me to fix them
now. One minor problem was fixed in pkg/machine/machine_windows.go.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Add support for the ServiceName key for all unit types
Extend the PodInfo struct into UnitInfo to consolidate all prepopulated data into a single map
Use the NodesInfo map instead of the resourceName
Update the UnitInfo in the convert function instead of returning it
No need to replace extension anymore just remove it
All e2e tests with dependencies on other Quadlet files moved to a separate section
Add the capability of overriding the service name in the test
Add e2e tests for the new functionality
Adjust integration tests
Update the MAN page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Split the table to three based on the expected outcome
Use helper functions to reduce the amount of parameter required in each entry
Remove the service name override code
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Adds a `NetworkAlias=` key to both .container and .pod quadlet files,
which translates to the `--network-alias` option to `podman run` and
`podman pod create` respectively. Can be repeated multiple times.
Signed-off-by: Félix Saparelli <felix@passcod.name>
I found that Quadlet didn't currently have support for log options.
This merge allows Quadlet to handle log options and correctly
pass those values through to `podman run` for Container and Kube
types.
Syntactically consistent with existing parameters:
```ini
[Container]
Image=localhost/imagename
LogOpt=path=/var/log/container/mycontainer.json
LogOpt=size=10mb
```
Signed-off-by: Brett Calliss <brett@obligatory.email>
.build files allow to build an image via Quadlet. The keys from a .build
file are translated to arguments of a `podman build` command by Quadlet.
Minimal keys for .build files are `ImageTag=` and a context directory,
see `SetWorkingDirectory=`, or a `File=` pointing to a Containerfile.
After sorting .build files into the Quadlet dependency order, there
remains a possible dependency cycle issue between .volume and .build
files: A .volume can have `Image=some.build`, and a .build can have
`Volume=some.volume:/some/volume`.
We solve this dependency cycle by prefilling resourceNames with all
image names from .build files before converting all the unit files.
This results in an issue for the test suite though: For .volume's
depending on *.image or *.build, we need to copy these additional
dependencies to the test's quadletDir, otherwise the test will fail.
This is necessary, because `handleImageSource()` actually needs to know
the image name defined in the referenced *.{build,image} file. It cannot
fall back on the default names, as it is done for networks or volumes,
for example.
Signed-off-by: Johannes Maibaum <jmaibaum@gmail.com>
If a container unit starts on boot with a dependency on `default.target`
the image unit may start too soon, before network is ready. This cause
the unit to fail to pull the image.
- Add a dependency on `network-online.target` to make sure image pulls
don't fail.
See https://github.com/containers/podman/issues/21873
- Document the hardcoded dependency on `network-online.target` for images unit
and explain how it can be overriden if necessary.
- tests/e2e/quadlet: Add `assert-last-key-regex`
Required to test the `After=` override in [Unit] section
See https://github.com/containers/podman/pull/22057#issuecomment-2008959993
- quadlet/unitfile: add a prepenUnitLine method
Requirements on networks should be inserted at the top of the
section so the user can override them.
Signed-off-by: jbtrystram <jbtrystram@redhat.com>
TMPDIR is typically /tmp which is typically(*) a tmpfs.
This PR ignores $TMPDIR when $CI is defined, forcing all
e2e tests to set up one central working directory in /var/tmp
instead.
Also, lots of cleanup.
(*) For many years, up to and still including the time of
this PR, /tmp on Fedora CI VMs is actually NOT tmpfs,
it is just / (root). This is nonstandard and undesirable.
Efforts are underway to remove this special case.
Signed-off-by: Ed Santiago <santiago@redhat.com>
Moving from Go module v4 to v5 prepares us for public releases.
Move done using gomove [1] as with the v3 and v4 moves.
[1] https://github.com/KSubedi/gomove
Signed-off-by: Matt Heon <mheon@redhat.com>
Cut is a cleaner & more performant api relative to SplitN(_, _, 2) added in go 1.18
Previously applied this refactoring to buildah:
https://github.com/containers/buildah/pull/5239
Signed-off-by: Philip Dubé <philip@peerdb.io>
Remove all trailing white spaces from all lines before the line by line
processing
Add test
Exclude the unit file used for the test from whitespace check
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
Add support for using multiple `Ulimit=` options in `.container` files.
Before, only the last `Ulimit=` option was used in the podman command.
Update podman-systemd.unit.5 docs to reflect this change.
Add `test/e2e/quadlet/ulimit.container` to e2e tests.
Signed-off-by: Paul Nettleton <k9@k9withabone.dev>
For a source file like `foo.container`, look for drop in named
`foo.container.d/*.conf` and merged them into the main file. The
dropins are applied in alphabetical order, and files in earlier
diretories override later files with same name.
This is similar to how systemd dropins work, see:
https://www.freedesktop.org/software/systemd/man/latest/systemd.unit.html
Also adds some tests for these
Signed-off-by: Alexander Larsson <alexl@redhat.com>
Add support for .pod unit files with only PodmanArgs, GlobalArgs, ContainersConfModule and PodName
Add support for linking .container units with .pod ones
Add e2e and system tests
Add to man page
Signed-off-by: Ygal Blum <ygal.blum@gmail.com>
This expands support for the (previously) boolean `Notify` directive, in
support of healthcheck determined SD-NOTIFY event emission, as
supported by Podman with the `--sdnotify=healthy` option.
Closes: #18189
Signed-off-by: Alex Palaistras <alex@deuill.org>
Odilon Sousa
Giuseppe Scrivano
Misaki Kasumi
openshift-merge-bot[bot]
Farya L. Maerten
Ygal Blum
Paul Holzinger
Farya L. M
Steve Jibson
Jerome Degroote
Daniel J Walsh
Félix Saparelli
Brett Calliss
Johannes Maibaum
jbtrystram
Jonas Berlin
Ed Santiago
Matt Heon
Alexander Larsson
Philip Dubé
Paul Nettleton
Alex Palaistras