Added support for pod security options. These are applied to infra and passed down to the
containers as added (unless overridden).
Modified the inheritance process from infra, creating a new function Inherit() which reads the config, and marshals the compatible options into an intermediate struct `InfraInherit`
This is then unmarshaled into a container config and all of this is added to the CtrCreateOptions. Removes the need (mostly) for special additons which complicate the Container_create
code and pod creation.
resolves#12173
Signed-off-by: cdoern <cdoern@redhat.com>
It has been deprecated and is no longer supported. Fully remove it and
only print a warning if a user uses it.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2011695
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added support for a new flag --passwd which, when false prohibits podman from creating entries in
/etc/passwd and /etc/groups allowing users to modify those files in the container entrypoint
resolves#11805
Signed-off-by: cdoern <cdoern@redhat.com>
This adds the following information to the output of 'podman inspect':
* CheckpointedAt - time the container was checkpointed
Only set if the container has been checkpointed
* RestoredAt - time the container was restored
Only set if the container has been restored
* CheckpointLog - path to the checkpoint log file (CRIU's dump.log)
Only set if the log file exists (--keep)
* RestoreLog - path to the restore log file (CRIU's restore.log)
Only set if the log file exists (--keep)
* CheckpointPath - path to the actual (CRIU) checkpoint files
Only set if the checkpoint files exists (--keep)
* Restored - set to true if the container has been restored
Only set if the container has been restored
Signed-off-by: Adrian Reber <areber@redhat.com>
There is a problem with creating and storing the exit command when the
container was created. It only contains the options the container was
created with but NOT the options the container is started with. One
example would be a CNI network config. If I start a container once, then
change the cni config dir with `--cni-config-dir` ans start it a second
time it will start successfully. However the exit command still contains
the wrong `--cni-config-dir` because it was not updated.
To fix this we do not want to store the exit command at all. Instead we
create it every time the conmon process for the container is startet.
This guarantees us that the container cleanup process is startet with
the correct settings.
[NO NEW TESTS NEEDED]
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Podman adds a few environment variables by default, and
currently there is no way to get rid of them from your container.
This option will allow you to specify which defaults you don't
want.
--unsetenv-all will remove all default environment variables.
Default environment variables can come from podman builtin,
containers.conf or from the container image.
Fixes: https://github.com/containers/podman/issues/11836
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
added the option for the user to specify a rate, in bytes, at which they would like to be able
to read from the device being added to the pod. This is the first in a line of pod device options.
WARNING: changed pod name json tag to pod_name to avoid confusion when marshaling with the containerspec's name
Signed-off-by: cdoern <cdoern@redhat.com>
podman inspect shows the healthcheck status in `.State.Healthcheck`,
docker uses `.State.Health`. To make sure docker scripts work we
should add the `Health` key. Because we do not want to display both keys
by default we only use the new `Health` key. This is a breaking change
for podman users but matches what docker does. To provide some form of
compatibility users can still use `--format {{.State.Healthcheck}}`. IT
is just not shown by default.
Fixes#11645
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The health check result is stored in the container state. Since the
state can change or might not even be set we have to retrive the current
state before we try to read the health check result.
Fixes#11687
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
added support for pod devices. The device gets added to the infra container and
recreated in all containers that join the pod.
This required a new container config item to keep track of the original device passed in by the user before
the path was parsed into the container device.
Signed-off-by: cdoern <cdoern@redhat.com>
added support for the --volume flag in pods using the new infra container design.
users can specify all volume options they can with regular containers
resolves#10379
Signed-off-by: cdoern <cdoern@redhat.com>
When inspecting a container, we now report whether the container
was stopped by a `podman checkpoint` operation via a new bool in
the State portion of inspected, `Checkpointed`.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Podman inspect has to show exposed ports to match docker. This requires
storing the exposed ports in the container config.
A exposed port is shown as `"80/tcp": null` while a forwarded port is
shown as `"80/tcp": [{"HostIp": "", "HostPort": "8080" }]`.
Also make sure to add the exposed ports to the new image when the
container is commited.
Fixes#10777
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
When attempting to copy files into and out of running containers
within the host pidnamespace, the code was attempting to join the
host pidns again, and getting an error. This was causing the podman
cp command to fail. Since we are already in the host pid namespace,
we should not be attempting to join. This PR adds a check to see if
the container is in NOT host pid namespace, and only then attempts to
join.
Fixes: https://github.com/containers/podman/issues/9985
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Support UID, GID, Mode options for mount type secrets. Also, change
default secret permissions to 444 so all users can read secret.
Signed-off-by: Ashley Cui <acui@redhat.com>
This option allows users to specify the maximum amount of time to run
before conmon sends the kill signal to the container.
Fixes: https://github.com/containers/podman/issues/6412
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The order of CapAdd when inspecting containers is deterministic.
However, the order of CapDrop is not (for unclear reasons). Add a
quick sort on the final array to guarantee a consistent order.
Fixes#9490
Signed-off-by: Matthew Heon <mheon@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When doing a container inspect on a container with unlimited ulimits,
the value should be -1. But because the OCI spec requires the ulimit
value to be uint64, we were displaying the inspect values as a uint64 as
well. Simple change to display as an int64.
Fixes: #9303
Signed-off-by: baude <bbaude@redhat.com>
Implement podman secret create, inspect, ls, rm
Implement podman run/create --secret
Secrets are blobs of data that are sensitive.
Currently, the only secret driver supported is filedriver, which means creating a secret stores it in base64 unencrypted in a file.
After creating a secret, a user can use the --secret flag to expose the secret inside the container at /run/secrets/[secretname]
This secret will not be commited to an image on a podman commit
Signed-off-by: Ashley Cui <acui@redhat.com>
This implements support for mounting and unmounting volumes
backed by volume plugins. Support for actually retrieving
plugins requires a pull request to land in containers.conf and
then that to be vendored, and as such is not yet ready. Given
this, this code is only compile tested. However, the code for
everything past retrieving the plugin has been written - there is
support for creating, removing, mounting, and unmounting volumes,
which should allow full functionality once the c/common PR is
merged.
A major change is the signature of the MountPoint function for
volumes, which now, by necessity, returns an error. Named volumes
managed by a plugin do not have a mountpoint we control; instead,
it is managed entirely by the plugin. As such, we need to cache
the path in the DB, and calls to retrieve it now need to access
the DB (and may fail as such).
Notably absent is support for SELinux relabelling and chowning
these volumes. Given that we don't manage the mountpoint for
these volumes, I am extremely reluctant to try and modify it - we
could easily break the plugin trying to chown or relabel it.
Also, we had no less than *5* separate implementations of
inspecting a volume floating around in pkg/infra/abi and
pkg/api/handlers/libpod. And none of them used volume.Inspect(),
the only correct way of inspecting volumes. Remove them all and
consolidate to using the correct way. Compat API is likely still
doing things the wrong way, but that is an issue for another day.
Fixes#4304
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The libpod/define code should not import any large dependencies,
as it is intended to be structures and definitions only. It
included the libpod/driver package for information on the storage
driver, though, which brought in all of c/storage. Split the
driver package so that define has the struct, and thus does not
need to import Driver. And simplify the driver code while we're
at it.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Our users are missing certain warning messages that would
make debugging issues with Podman easier.
For example if you do a podman build with a Containerfile
that contains the SHELL directive, the Derective is silently
ignored.
If you run with the log-level warn you get a warning message explainging
what happened.
$ podman build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
--> 7a207be102a
7a207be102aa8993eceb32802e6ceb9d2603ceed9dee0fee341df63e6300882e
$ podman --log-level=warn build --no-cache -f /tmp/Containerfile1 /tmp/
STEP 1: FROM ubi8
STEP 2: SHELL ["/bin/bash", "-c"]
STEP 3: COMMIT
WARN[0000] SHELL is not supported for OCI image format, [/bin/bash -c] will be ignored. Must use `docker` format
--> 7bd96fd25b9
7bd96fd25b9f755d8a045e31187e406cf889dcf3799357ec906e90767613e95f
These messages will no longer be lost, when we default to WARNing level.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Allow users to specify unbindable on volume command line
Switch internal mounts to rprivate to help prevent leaks.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Add a new "image" mount type to `--mount`. The source of the mount is
the name or ID of an image. The destination is the path inside the
container. Image mounts further support an optional `rw,readwrite`
parameter which if set to "true" will yield the mount writable inside
the container. Note that no changes are propagated to the image mount
on the host (which in any case is read only).
Mounts are overlay mounts. To support read-only overlay mounts, vendor
a non-release version of Buildah.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When we create a container, we assign a cgroup parent based on
the current cgroup manager in use. This parent is only usable
with the cgroup manager the container is created with, so if the
default cgroup manager is later changed or overridden, the
container will not be able to start.
To solve this, store the cgroup manager that created the
container in container configuration, so we can guarantee a
container with a systemd cgroup parent will always be started
with systemd cgroups.
Unfortunately, this is very difficult to test in CI, due to the
fact that we hard-code cgroup manager on all invocations of
Podman in CI.
Fixes#7830
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it allows to manually tweak the configuration for cgroup v2.
we will expose some of the options in future as single
options (e.g. the new memory knobs), but for now add the more generic
--cgroup-conf mechanism for maximum control on the cgroup
configuration.
OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040
Requires: https://github.com/containers/crun/pull/459
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
This allows us to determine if the container auto-detected that
systemd was in use, and correctly activated systemd integration.
Use this to wire up some integration tests to verify that systemd
integration is working properly.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We had a field for this in the inspect data, but it was never
being populated. Because of this, `podman pod inspect` stopped
showing port bindings (and other infra container settings). Add
code to populate the infra container inspect data, and add a test
to ensure we don't regress again.
Signed-off-by: Matthew Heon <mheon@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
Daniel J Walsh
Valentin Rothberg
OpenShift Merge Robot
cdoern
Adrian Reber
Giuseppe Scrivano
Paul Holzinger
Matthew Heon
flouthoc
Ashley Cui
chenkang
Paul Holzinger
baude
Matthew Heon