Write a BeValidJSON() matcher, and replace IsJSONOutputValid():
sed -i -e 's/Expect(\(.*\)\.IsJSONOutputValid()).To(BeTrue())/Expect(\1.OutputToString())\.To(BeValidJSON())/' test/e2e/*_test.go
(Plus a few manual tweaks)
Signed-off-by: Ed Santiago <santiago@redhat.com>
Renamed podman pod stats test specs to distinguish them from podman stats tests.
podman stats tests where disabled by a +build flag.
Fix podman stats format test, add negative test.
Fix podman stats cli command, exit non-zero on invalid format string.
Add tests for podman stats interval flag.
Signed-off-by: Thomas Weber <towe75@googlemail.com>
e2e test failures are rife with messages like:
Expected 1 to equal 0
These make me cry. They're anti-helpful, requiring the reader
to dive into the source code to figure out what those numbers
mean.
Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I
don't know if it spits out a better diagnostic (I have no way
to run e2e tests on my laptop), but I have to fantasize that
it will, and given the state of our flakes I assume that at
least one test will fail and give me the opportunity to see
what the error message looks like.
THIS IS NOT REVIEWABLE CODE. There is no way for a human
to review it. Don't bother. Maybe look at a few random
ones for sanity. If you want to really review, here is
a reproducer of what I did:
cd test/e2e
! positive assertions. The second is the same as the first,
! with the addition of (unnecessary) parentheses because
! some invocations were written that way. The third is BeZero().
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go
! Same as above, but handles three non-numeric exit codes
! in run_exit_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go
! negative assertions. Difference is the spelling of 'To(Not)',
! 'ToNot', and 'NotTo'. I assume those are all the same.
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go
! negative, old use of BeZero()
perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go
Run those on a clean copy of main branch (at the same branch
point as my PR, of course), then diff against a checked-out
copy of my PR. There should be no differences. Then all you
have to review is that my replacements above are sane.
UPDATE: nope, that's not enough, you also need to add gomega/gexec
to the files that don't have it:
perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}'))
UPDATE 2: hand-edit run_volume_test.go
UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places
UPDATE 4: skip a test due to bug #10935 (race condition)
Signed-off-by: Ed Santiago <santiago@redhat.com>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
- When one or more containers in the Pod reports an error on an operation
report StatusConflict and report the error(s)
- jsoniter type encoding used to marshal error as string using error.Error()
- Update test framework to allow setting any flag when creating pods
- Fix test_resize() result check
Fixes#8865
Signed-off-by: Jhon Honce <jhonce@redhat.com>
When running as rootless, on a CgroupV1 host these tests all report:
`Error: pod stats is not supported in rootless mode without cgroups v2`
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
This should be addressed by PR
https://github.com/containers/podman/pull/8685
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
Nearly/all of the 'podman stats' tests fail on Fedora when
executing testing inside a container, and CGroupsV1 is used on the
host. The typical failure message is of the form `Error: unable to
load cgroup at /machine.slice/.../: cgroup deleted`.
Note: Recently updated F32 (prior-fedora) and Ubuntu 20.04
(prior-ubuntu) VMs always use CGroupsV1 with runc. F33 and
Ubuntu 20.10 were updated to always use CGroupsV2 with crun.
Signed-off-by: Chris Evich <cevich@redhat.com>
Following commands:
* systemd generate
* networks inspect
* pod stats
* Fixed test where format was quoted and then quoted again
* Fixed bug where output never printed '--' on missed reads
* pod ps
Signed-off-by: Jhon Honce <jhonce@redhat.com>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Podman containers can specify that they get their network
namespace from another container. This is automatic in pods, but
any container can do it.
The problem is that these containers are not guaranteed to have a
network namespace of their own; it is perfectly valid to join the
network namespace of a --net=host container, and both containers
will end up in the host namespace. The code for obtaining network
stats did not account for this, and could cause segfaults as a
result. Fortunately, the fix is simple - the function we use to
get said stats already performs appropriate checks, so we just
need to recursively call it.
Fixes#5652
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Implement pod stats for the local and remote client. Both code paths end
up in infra/abi to allow for code share.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Rather than checking for non-zero, we need to check for >0 to
distinguish between timeouts and error exit codes.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
when doing localized tests (not varlink), we can use secondary image
stores as read-only image caches. this cuts down on test time
significantly because each test does not need to restore the images from
a tarball anymore.
Signed-off-by: baude <bbaude@redhat.com>
a series of improvements to our ginkgo test framework so we can
get better ideas of whats going on when run in CI
Signed-off-by: baude <bbaude@redhat.com>
Go templates were not being processed or printed correctly for podman
pod stats. Added the ability to do templates as well as honor the
table identifier.
Fixes#2258
Signed-off-by: baude <bbaude@redhat.com>
Add the ability to run the integration (ginkgo) suite using
the remote client.
Only the images_test.go file is run right now; all the rest are
isolated with a // +build !remotelinux. As more content is
developed for the remote client, we can unblock the files and
just block single tests as needed.
Signed-off-by: baude <bbaude@redhat.com>
As well as small style corrections, update pod_top_test to use CreatePod, and move handling of adding a container to the pod's namespace from container_internal_linux to libpod/option.
Signed-off-by: haircommander <pehunt@redhat.com>
Closes: #1187
Approved by: mheon
Valentin Rothberg
Ed Santiago
Thomas Weber
Jhon Honce
Daniel J Walsh
Matthew Heon
Chris Evich
Brent Baude
Giuseppe Scrivano
Yiqiao Pu
haircommander