The `podman ps --all` command will now show containers that
are under the control of other c/storage container systems and
the new `ps --storage` option will show only containers that are
in c/storage but are not controlled by libpod.
In the below examples, the '*working-container' entries were created
by Buildah.
```
podman ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9257ef8c786c docker.io/library/busybox:latest ls /etc 8 hours ago Exited (0) 8 hours ago gifted_jang
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago storage busybox-working-container
7a5a7b099d33 localhost/tom:latest ls -alF 30 hours ago Exited (0) 30 hours ago hopeful_hellman
01d601fca090 localhost/tom:latest ls -alf 30 hours ago Exited (1) 30 hours ago determined_panini
ee58f429ff26 localhost/tom:latest buildah 33 hours ago storage alpine-working-container
podman ps --external
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d302c81856da docker.io/library/busybox:latest buildah 30 hours ago external busybox-working-container
ee58f429ff26 localhost/tom:latest buildah 33 hours ago external alpine-working-container
```
Signed-off-by: TomSweeneyRedHat <tsweeney@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
it allows to manually tweak the configuration for cgroup v2.
we will expose some of the options in future as single
options (e.g. the new memory knobs), but for now add the more generic
--cgroup-conf mechanism for maximum control on the cgroup
configuration.
OCI specs change: https://github.com/opencontainers/runtime-spec/pull/1040
Requires: https://github.com/containers/crun/pull/459
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
because a pod's network information is dictated by the infra container at creation, a container cannot be created with network attributes. this has been difficult for users to understand. we now return an error when a container is being created inside a pod and passes any of the following attributes:
* static IP (v4 and v6)
* static mac
* ports -p (i.e. -p 8080:80)
* exposed ports (i.e. 222-225)
* publish ports from image -P
Signed-off-by: Brent Baude <bbaude@redhat.com>
The define package under Libpod is intended to be an extremely
minimal package, including constants and very little else.
However, as a result of some legacy code, it was dragging in all
of libpod/image (and, less significantly, the util package).
Fortunately, this was just to ensure that error constants were
not duplicating, and there's nothing preventing us from
importing in the other direction and keeping libpod/define free
of dependencies.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
--umask sets the umask inside the container
Defaults to 0022
Co-authored-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: Ashley Cui <acui@redhat.com>
This allows us to determine if the container auto-detected that
systemd was in use, and correctly activated systemd integration.
Use this to wire up some integration tests to verify that systemd
integration is working properly.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We had a field for this in the inspect data, but it was never
being populated. Because of this, `podman pod inspect` stopped
showing port bindings (and other infra container settings). Add
code to populate the infra container inspect data, and add a test
to ensure we don't regress again.
Signed-off-by: Matthew Heon <mheon@redhat.com>
--sdnotify container|conmon|ignore
With "conmon", we send the MAINPID, and clear the NOTIFY_SOCKET so the OCI
runtime doesn't pass it into the container. We also advertise "ready" when the
OCI runtime finishes to advertise the service as ready.
With "container", we send the MAINPID, and leave the NOTIFY_SOCKET so the OCI
runtime passes it into the container for initialization, and let the container advertise further metadata.
This is the default, which is closest to the behavior podman has done in the past.
The "ignore" option removes NOTIFY_SOCKET from the environment, so neither podman nor
any child processes will talk to systemd.
This removes the need for hardcoded CID and PID files in the command line, and
the PIDFile directive, as the pid is advertised directly through sd-notify.
Signed-off-by: Joseph Gooch <mrwizard@dok.org>
With the advent of Podman 2.0.0 we crossed the magical barrier of go
modules. While we were able to continue importing all packages inside
of the project, the project could not be vendored anymore from the
outside.
Move the go module to new major version and change all imports to
`github.com/containers/libpod/v2`. The renaming of the imports
was done via `gomove` [1].
[1] https://github.com/KSubedi/gomove
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
--tz flag sets timezone inside container
Can be set to IANA timezone as well as `local` to match host machine
Signed-off-by: Ashley Cui <acui@redhat.com>
The infra/abi code for pods was written in a flawed way, assuming
that the map[string]error containing individual container errors
was only set when the global error for the pod function was nil;
that is not accurate, and we are actually *guaranteed* to set the
global error when any individual container errors. Thus, we'd
never actually include individual container errors, because the
infra code assumed that err being set meant everything failed and
no container operations were attempted.
We were originally setting the cause of the error to something
nonsensical ("container already exists"), so I made a new error
indicating that some containers in the pod failed. We can then
ignore that error when building the report on the pod operation
and actually return errors from individual containers.
Unfortunately, this exposed another weakness of the infra code,
which was discarding the container IDs. Errors from individual
containers are not guaranteed to identify which container they
came from, hence the use of map[string]error in the Pod API
functions. Rather than restructuring the structs we return from
pkg/infra, I just wrapped the returned errors with a message
including the ID of the container.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Throw an error if a specified tag does not exist. Also make sure that
the user input is normalized as we already do for `podman tag`.
To prevent regressions, add a set of end-to-end and systemd tests.
Last but not least, update the docs and add bash completions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
When the container uses journald logging, we don't want to
automatically use the same driver for its exec sessions. If we do
we will pollute the journal (particularly in the case of
healthchecks) with large amounts of undesired logs. Instead,
force exec sessions logs to file for now; we can add a log-driver
flag later (we'll probably want to add a `podman logs` command
that reads exec session logs at the same time).
As part of this, add support for the new 'none' logs driver in
Conmon. It will be the default log driver for exec sessions, and
can be optionally selected for containers.
Great thanks to Joe Gooch (mrwizard@dok.org) for adding support
to Conmon for a null log driver, and wiring it in here.
Fixes#6555
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This came out of a conversation with Valentin about
systemd-managed Podman. He discovered that unit files did not
properly handle cases where Conmon was dead - the ExecStopPost
`podman rm --force` line was not actually removing the container,
but interestingly, adding a `podman cleanup --rm` line would
remove it. Both of these commands do the same thing (minus the
`podman cleanup --rm` command not force-removing running
containers).
Without a running Conmon instance, the container process is still
running (assuming you killed Conmon with SIGKILL and it had no
chance to kill the container it managed), but you can still kill
the container itself with `podman stop` - Conmon is not involved,
only the OCI Runtime. (`podman rm --force` and `podman stop` use
the same code to kill the container). The problem comes when we
want to get the container's exit code - we expect Conmon to make
us an exit file, which it's obviously not going to do, being
dead. The first `podman rm` would fail because of this, but
importantly, it would (after failing to retrieve the exit code
correctly) set container status to Exited, so that the second
`podman cleanup` process would succeed.
To make sure the first `podman rm --force` succeeds, we need to
catch the case where Conmon is already dead, and instead of
waiting for an exit file that will never come, immediately set
the Stopped state and remove an error that can be caught and
handled.
Signed-off-by: Matthew Heon <mheon@redhat.com>
this is step 1 to self-discovery of remote ssh connections. we add a remotesocket struct to info to detect what the socket path might be.
Co-authored-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Brent Baude <bbaude@redhat.com>
Currently we are displaying the Seconds since EPOCH
this will change to displaying date, similar to `podman version`
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
By moving a couple of variables from libpod/libpod to libpod/libpod/define
I am able shrink the podman-remote-* executables by another megabyte.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We’re now able to build a static podman binary based on a custom nix
derivation. This is integrated in cirrus as well, whereas a later target
would be to provide a self-contained static binary bundle which can be
installed on any Linux x64-bit system.
Fixes: https://github.com/containers/libpod/issues/1399
Signed-off-by: Sascha Grunert <sgrunert@suse.com>
This one was a massive pain to track down.
The original symptom was an error message from rootless Podman
trying to make a container in a pod. I unfortunately did not look
at the error message closely enough to realize that the namespace
in question was the cgroup namespace (the reproducer pod was
explicitly set to only share the network namespace), else this
would have been quite a bit shorter.
I spent considerable effort trying to track down differences
between the inspect output of the two containers, and when that
failed I was forced to resort to diffing the OCI specs. That
finally proved fruitful, and I was able to determine what should
have been obvious all along: the container was joining the cgroup
namespace of the infra container when it really ought not to
have.
From there, I discovered a variable collision in pod config. The
UsePodCgroup variable means "create a parent cgroup for the pod
and join containers in the pod to it". Unfortunately, it is very
similar to UsePodUTS, UsePodNet, etc, which mean "the pod shares
this namespace", so an accessor was accidentally added for it
that indicated the pod shared the cgroup namespace when it really
did not. Once I realized that, it was a quick fix - add a bool to
the pod's configuration to indicate whether the cgroup ns was
shared (distinct from UsePodCgroup) and use that for the
accessor.
Also included are fixes for `podman inspect` and
`podman pod inspect` that fix them to actually display the state
of the cgroup namespace (for container inspect) and what
namespaces are shared (for pod inspect). Either of those would
have made tracking this down considerably quicker.
Fixes#6149
Signed-off-by: Matthew Heon <mheon@redhat.com>
Add the `podman generate kube` and `podman play kube` command. The code
has largely been copied from Podman v1 but restructured to not leak the
K8s core API into the (remote) client.
Both commands are added in the same commit to allow for enabling the
tests at the same time.
Move some exports from `cmd/podman/common` to the appropriate places in
the backend to avoid circular dependencies.
Move definitions of label annotations to `libpod/define` and set the
security-opt labels in the frontend to make kube tests pass.
Implement rest endpoints, bindings and the tunnel interface.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Introduced define.ErrImageInUse to assist in determining the exit code
without resorting string searches.
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Add more default options parsing
Switch to using --time as opposed to --timeout to better match Docker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
This will replace the structs in use in libpod, which cannot be
used as they are also directly involved in the database
representation of pods and cannot be moved out of Libpod.
Signed-off-by: Matthew Heon <mheon@redhat.com>
the current implementation of info, while typed, is very loosely done so. we need stronger types for our apiv2 implmentation and bindings.
Signed-off-by: Brent Baude <bbaude@redhat.com>
add the ability to attach to a running container. the tunnel side of this is not enabled yet as we have work on the endpoints and plumbing to do yet.
add the ability to exec a command in a running container. the tunnel side is also being deferred for same reason.
Signed-off-by: Brent Baude <bbaude@redhat.com>
The `pause:3.1` has wrong configs for non-amd64 images as they all claim
to be for amd64. The issue has now been fixed in the latest
`pause:3.2`.
[1] https://github.com/kubernetes/kubernetes/issues/87325
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of the rework of exec sessions, we want to split Create
and Start - and, as a result, we need to keep everything needed
to start exec sessions in the struct, not just the bare minimum
for tracking running ones.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Daniel J Walsh
Giuseppe Scrivano
Brent Baude
zhangguanzhang
Matthew Heon
Ashley Cui
OpenShift Merge Robot
Matthew Heon
Joseph Gooch
Valentin Rothberg
Qi Wang
Sascha Grunert
Jhon Honce
Sujil02