We initially believed that implementing this required support for
restarting containers after reboot, but this is not the case.
The unless-stopped restart policy acts identically to the always
restart policy except in cases related to reboot (which we do not
support yet), but it does not require that support for us to
implement it.
Changes themselves are quite simple, we need a new restart policy
constant, we need to remove existing checks that block creation
of containers when unless-stopped was used, and we need to update
the manpages.
Fixes#6508
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This fixes a condition when a container is removed while
following the logs and prints an error when the container
is removed forcefully.
Signed-off-by: jgallucci32 <john.gallucci.iv@gmail.com>
Fixes an issue with the previous PR where a container would exit while following logs and the log tail continued to follow. This creates a subroutine which checks the state of the container and instructs the tailLog to stop when it reaches EOF.
Tested the following conditions:
* Tail and follow logs of running container
* Tail and follow logs of stopped container
* Tail and follow logs of running container which exits after some time
Signed-off-by: jgallucci32 <john.gallucci.iv@gmail.com>
fix the check for c.state.NetNS == nil. Its value is changed in the
first code block, so the condition is always true in the second one
and we end up running slirp4netns twice.
Closes: https://github.com/containers/libpod/issues/6538
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Create a new template for generating a pod unit file. Eventually, this
allows for treating and extending pod and container generation
seprately.
The `--new` flag now also works on pods.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Refactor the systemd-unit generation code and move all the logic into
`pkg/systemd/generate`. The code was already hard to maintain but I
found it impossible to wire the `--new` logic for pods in all the chaos.
The code refactoring in this commit will make maintaining the code
easier and should make it easier to extend as well. Further changes and
refactorings may still be needed but they will easier.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add an `--infra-conmon-pidfile` flag to `podman-pod-create` to write the
infra container's conmon process ID to a specified path. Several
container sub-commands already support `--conmon-pidfile` which is
especially helpful to allow for systemd to access and track the conmon
processes. This allows for easily tracking the conmon process of a
pod's infra container.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add a `CreateCommand` field to the pod config which includes the entire
`os.Args` at pod-creation. Similar to the already existing field in a
container config, we need this information to properly generate generic
systemd unit files for pods. It's a prerequisite to support the `--new`
flag for pods.
Also add the `CreateCommand` to the pod-inspect data, which can come in
handy for debugging, general inspection and certainly for the tests that
are added along with the other changes.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Two areas needed tweaking to accomplish this: port parsing and
binding ports on the host.
Parsing is an obvious problem - we have to accomodate an IPv6
address enclosed by [] as well as a normal IPv4 address. It was
slightly complicated by the fact that we previously just counted
the number of colons in the whole port definition (a thousand
curses on whoever in the IPv6 standard body decided to reuse
colons for address separators), but did not end up being that
bad.
Libpod also (optionally) binds ports on the host to prevent their
reuse by host processes. This code was IPv4 only for TCP, and
bound to both for UDP (which I'm fairly certain is not correct,
and has been adjusted). This just needed protocols adjusted to
read "tcp4"/"tcp6" and "udp4"/"udp6" based on what we wanted to
bind to.
Fixes#5715
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
do not set the hostname when joining an UTS namespace, as it could be
owned by a different userns.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
when running in a new userns, make sure the resolv.conf and hosts
files bind mounted from another container are accessible to root in
the userns.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
This came out of a conversation with Valentin about
systemd-managed Podman. He discovered that unit files did not
properly handle cases where Conmon was dead - the ExecStopPost
`podman rm --force` line was not actually removing the container,
but interestingly, adding a `podman cleanup --rm` line would
remove it. Both of these commands do the same thing (minus the
`podman cleanup --rm` command not force-removing running
containers).
Without a running Conmon instance, the container process is still
running (assuming you killed Conmon with SIGKILL and it had no
chance to kill the container it managed), but you can still kill
the container itself with `podman stop` - Conmon is not involved,
only the OCI Runtime. (`podman rm --force` and `podman stop` use
the same code to kill the container). The problem comes when we
want to get the container's exit code - we expect Conmon to make
us an exit file, which it's obviously not going to do, being
dead. The first `podman rm` would fail because of this, but
importantly, it would (after failing to retrieve the exit code
correctly) set container status to Exited, so that the second
`podman cleanup` process would succeed.
To make sure the first `podman rm --force` succeeds, we need to
catch the case where Conmon is already dead, and instead of
waiting for an exit file that will never come, immediately set
the Stopped state and remove an error that can be caught and
handled.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When we moved to the new Namespace types in Specgen, we made a
distinction between taking a namespace from a pod, and taking it
from another container. Due to this new distinction, some code
that previously worked for both `--pod=$ID` and
`--uts=container:$ID` has accidentally become conditional on only
the latter case. This happened for Hostname - we weren't properly
setting it in cases where the container joined a pod.
Fortunately, this is an easy fix once we know to check the
condition.
Also, ensure that `podman pod inspect` actually prints hostname.
Fixes#6494
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
this is step 1 to self-discovery of remote ssh connections. we add a remotesocket struct to info to detect what the socket path might be.
Co-authored-by: Jhon Honce <jhonce@redhat.com>
Signed-off-by: Brent Baude <bbaude@redhat.com>
Podman containers can specify that they get their network
namespace from another container. This is automatic in pods, but
any container can do it.
The problem is that these containers are not guaranteed to have a
network namespace of their own; it is perfectly valid to join the
network namespace of a --net=host container, and both containers
will end up in the host namespace. The code for obtaining network
stats did not account for this, and could cause segfaults as a
result. Fortunately, the fix is simple - the function we use to
get said stats already performs appropriate checks, so we just
need to recursively call it.
Fixes#5652
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The biggest obstacle here was cleanup - we needed a way to remove
detached exec sessions after they exited, but there's no way to
tell if an exec session will be attached or detached when it's
created, and that's when we must add the exit command that would
do the removal. The solution was adding a delay to the exit
command (5 minutes), which gives sufficient time for attached
exec sessions to retrieve the exit code of the session after it
exits, but still guarantees that they will be removed, even for
detached sessions. This requires Conmon 2.0.17, which has the new
`--exit-delay` flag.
As part of the exit command rework, we can drop the hack we were
using to clean up exec sessions (remove them as part of inspect).
This is a lot cleaner, and I'm a lot happier about it.
Otherwise, this is just plumbing - we need a bindings call for
detached exec, and that needed to be added to the tunnel mode
backend for entities.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Support the `X-Registry-Auth` http-request header.
* The content of the header is a base64 encoded JSON payload which can
either be a single auth config or a map of auth configs (user+pw or
token) with the corresponding registries being the keys. Vanilla
Docker, projectatomic Docker and the bindings are transparantly
supported.
* Add a hidden `--registries-conf` flag. Buildah exposes the same
flag, mostly for testing purposes.
* Do all credential parsing in the client (i.e., `cmd/podman`) pass
the username and password in the backend instead of unparsed
credentials.
* Add a `pkg/auth` which handles most of the heavy lifting.
* Go through the authentication-handling code of most commands, bindings
and endpoints. Migrate them to the new code and fix issues as seen.
A final evaluation and more tests is still required *after* this
change.
* The manifest-push endpoint is missing certain parameters and should
use the ABI function instead. Adding auth-support isn't really
possible without these parts working.
* The container commands and endpoints (i.e., create and run) have not
been changed yet. The APIs don't yet account for the authfile.
* Add authentication tests to `pkg/bindings`.
Fixes: #6384
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Currently we are displaying the Seconds since EPOCH
this will change to displaying date, similar to `podman version`
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
By moving a couple of variables from libpod/libpod to libpod/libpod/define
I am able shrink the podman-remote-* executables by another megabyte.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The cleanup command creation logic is made public as part of this
and wired such that we can call it both within SpecGen (to make
container exit commands) and from the ABI detached exec handler.
Exit commands are presently only used for detached exec, but
theoretically could be turned on for all exec sessions if we
wanted (I'm declining to do this because of potential overhead).
I also forgot to copy the exit command from the exec config into
the ExecOptions struct used by the OCI runtime, so it was not
being added.
There are also two significant bugfixes for exec in here. One is
for updating the status of running exec sessions - this was
always failing as I had coded it to remove the exit file *before*
reading it, instead of after (oops). The second was that removing
a running exec session would always fail because I inverted the
check to see if it was running.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We need to be able to use cleanup processes to remove exec
sessions as part of detached exec. This PR adds that ability. A
new flag is added to `podman container cleanup`, `--exec`, to
specify an exec session to be cleaned up.
As part of this, ensure that `ExecCleanup` can clean up exec
sessions that were running, but have since exited. This ensures
that we can come back to an exec session that was running but has
since stopped, and clean it up.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of the massive exec rework, I stubbed out a function for
non-detached exec, which is implemented here. It's largely
similar to the existing exec functions, but missing a few pieces.
This also involves implemented a new OCI runtime call for
detached exec. Again, very similar to the other functions, but
with a few missing pieces.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
These are required for detached exec, where they will be used to
clean up and remove exec sessions when they exit.
As part of this, move all Exec related functionality for the
Conmon OCI runtime into a separate file; the existing one was
around 2000 lines.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
specifying `-n=ctr-name` tells conmon to log CONTAINER_NAME=name if the log driver is journald
add this, and a test!
also, refactor the args slice creation to not append() unnecessarily.
Signed-off-by: Peter Hunt <pehunt@redhat.com>
In FIPS Mode we expect to work off of the Mountpath not the Rundir path.
This is causing FIPS Mode checks to fail.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
OpenShift Merge Robot
jgallucci32
Matthew Heon
Daniel J Walsh
jgallucci32
Qi Wang
Giuseppe Scrivano
Valentin Rothberg
Will Haines
Matthew Heon
Brent Baude
Peter Hunt